Page 1 of 9 12345 ... LastLast
Results 1 to 10 of 83

Thread: VIX Image ET9000

  1. #1

    korn's Avatar
    Join Date
    Dec 2010
    Location
    SatDreamGr
    Posts
    51,779
    Rep Power
    2484980

    VIX Image ET9000

    New VIX Image ET9000 - v2.1
    05/03/2011 - Open ViX 2.1
    Based on Open PLi 2.0

    From VIX Team



    Enigma: 04-03-2011.
    Enigma Plugins: 04-03-2011.
    GCC Version: 4.4.4.
    Drivers: 20110214.

    Team ViX Enchancements


    New VIX Image ET9000 - v2.1
    05/03/2011 - Open ViX 2.1
    Based on Open PLi 2.0

    From VIX Team

    Enigma: 04-03-2011.
    Enigma Plugins: 04-03-2011.
    GCC Version: 4.4.4.
    Drivers: 20110214.

    Team ViX Enchancements

    ViX Bootlogos, Radio Logo and Shut Down Logos.
    ViX Team Spinner.
    ViX Team Vu_HD Skin.
    ViX Team softcam manager (softcams will need to be installed manually).
    ViX Team Cron Manager - Allows you to create cron jobs from scrips in /usr/script/ and set them to run at pre-defined times by you. For more info, look at the screen shots below.
    ViX Team Power Manager - This allows you to enable standby at a specific time, enable deep standby at specific times, do a GUI restart at specific times, or do a full reboot at specific times. If standby is set after deep standby, then it will wake the box up and return the box to the state it was before deepsleep was initiated... For more info, look at the screenshots below.
    ViX Team Device Manager - This enables you to choose where you want to mount USB Sticks, USB HDDs, etc. This can be found in Menu -> Setup -> VIX -> Device Manager. Please also note that USB / ESATA devices NEED there mount points setup in Device Manager (green button whilst in Device Manager) in order for them to work correctly.
    ViX Team Image Manager - This enables you to backup and restore your image (nb, we are talking the whole image, not just settings). This can be found in Menu -> Setup -> ViX -> Image Manager. You can choose where to store your backups to, either HDD or USB. /media/hdd/imagebackups or /media/usb/imagebackups folder (setup by pressing menu, whilst your in Image Manager).
    ViX Team Overscan fix - This is the fix to remedy any overscan people had in the previous release. To use this, go to Menu -> Setup -> VIX -> Skin Settings and alter the "Menu Overscan amount" to suit your display.
    ViX Team Swap Manager - Allows you to create/use swap files on usb/hdd, and also allows you to use swap partitions.
    ViX-EPG - This is a simpler, faster version of CoolTVGuide, modified for the image.
    ViX QuickEPG - This is VIXs' version of QuickZap. You can see the full epg data for the channel, not just now and next. Picons work within QuickEPG. Also includes channel preview.
    ViX Quick Event Info - This is the new way to receive the event info on the ViX image. Press OK button once to get the info bar up, press it once more (i.e. a second time) to receive the information about what is currently showing...
    ViX Single EPG (with channel preview) - The is new and unique to vix, after you open the ViX single EPG (short RED) you can view the 7 day epg for that channel, now to see another channels epg, either use the Channel up/down buttons on your remote or just key in the channel number. if you want to preview the channel your currently viewing the EPG for (ie you want to see what the current program is like) just press 'OK' on your remote, this will change to that channel showing you the program in the small video window. if you don't like it, go find another channel to preview by keying in new channel number (or up/down buttons). or if you do like it and want to go fullscreen on it, just press 'OK' again. but if you feel you want to return to the original channel you where watching (whilst still in ViX Single EPG) just press 'EXIT" button, this will return to where you where before you entered ViX Single EPG)
    ViX Network Manager added to VIX Menu - This allows you to stop and start certain network features. The features you can stop/start are: FTP, NFS, VPN, Samba and Telnet.
    USB DTT - To install dvb-t, you just need to go to the plugins downloads, and select the stick you have. This will then install the drivers for your stick. You will then need to restart your receiver. Once restarted, go to Menu -> Setup -> Service Starting -> Tuner Config, and you should notice Tuner C as your USB DTT...
    IPK Installer - Just copy your .ipk fle into '/tmp' and go to the menu option.
    AutoTimer plugin integrated into image - Create an AutoTimer (Series Link), using Blue button in Current Channel EPG info.
    XMLTV EPG Importer - Thanks to Rytec for his support on this Importer. This has been updated so that the Import automatically updates itself from the servers, so there is no need to download and install new source files. Thanks to Rytec for the idea and andyblac for coding it.
    CrossEPG included in image as default - Settings for this can be found in Menu -> Setup -> VIX -> CrossEPG.
    EPG Download from transponders - This incorporates the EIT, MHW, FREESAT, NetMed & VIASAT downloads. To enable/disable, change your settings in the Menu -> Setup -> System -> Customise.
    EPG load patch - Image patched to allow EPG data to be loaded without the need for a restart.
    WebInterface and Help Screens - The Web Interface Remote Control correctly shows the ET9000 remote control, with all buttons mapped correctly. As well as this, in all Help screens, the remote control has been updated to the ET9000, and all references of Dreambox removed.
    Added option to disable the spinner (egg timer) - Change the setting of "Show Animation while busy" in Menu -> Setup -> System -> Customise.
    Added option to disable the channel numbers in Channel List - BMCC bouquet's have Channel Numbers in their channel name, so you get them twice in channel list.
    Panic Button - Added option to enable/disable panic button (goes direct to channel 1).
    Subserivice Option - This option allows you to assign the Subservice shortcut to a long green press. To change this option, go to VIX Menu -> VIX Setup.
    Option to disable ViX coloured buttons - This should ensure that if users want to use MultiQuick button plugin, it should work without issue
    Added Wireless Lan Support - This is automatically enabled in the image. To set up, use the Network manager on first boot, or from the Menu -> Setup -> System -> Network.
    NFS Server added to image and set to run automatically - To edit the folders you wish to share, you will need to edit file /etc/exports.
    Network Browser - Added Network Browser to help you setup share mounts.
    OpenVPN Support - This will need to be configured to your need first then use the manager to setup to autostart.
    Added Smargo Support - This is automatically enabled in image.
    Recorded Items - Recorded Items list modified to move item, browse directories, etc. Works similarly to suomipoeka plugin. Can be selected to load via the recorded items button, or from the tv button.
    Permanent Timeshift Plugin integrated (Disabled by default, turn on via Timeshift settings).
    Integrated AutoTimer
    Integrated EPG Search
    Integrated IMDb Search



    Button Mappings

    Short Red** & *** - Show current channel EPG info (ViX Single EPG).
    Long Red*** - Show current event.
    Short Green** & *** - Timers.
    Long Green*** - AutoTimer Timers.
    Short Yellow*** - EPG Search.
    Long Yellow*** - IMDB Database.
    Short Blue - Extensions.
    Long Blue*** - Plugins Menu.
    EPG - Opens ViX EPG.
    Left/Right** - Opens ViX QuickEPG.



    ** Can be changed in ViX Menu
    *** Can be turned off in ViX Menu

    Known Bugs

    None that we know of

    Special thanks to the following members:

    vu+nl for skinning his magic skins for ViX Team image
    rytec - for his continued support.
    PLi Team for their great base image and allowing us to use it.
    zoka.cc for his Picon sets
    Coolman and all other developers for their plugins used in the feeds of this image.
    All of the ViX Beta team for their hours of testing and dedication on getting this image and DTT working

  2. #2

    korn's Avatar
    Join Date
    Dec 2010
    Location
    SatDreamGr
    Posts
    51,779
    Rep Power
    2484980
    ViX Team ET9000 Image v2.2- 11/06/2011


    New VIX Image ET9000 - v2.2
    11/06/2011 - Open ViX 2.2
    Based on Open PLi 2.0



    From VIX Team
    Enigma: 11-06-2011.
    Enigma Plugins: 11-06-2011.
    GCC Version: 4.4.4.
    Drivers: 20110516.

    ViX is now embedded within the image even more. A lot of settings have been moved out of the ViX menus, and incorporated within the image. Settings from previous images may not be 100% compatible, and it might be best to re-setup your image without restoring system settings for 100% reliability.

    If you have previously used NetworkBrowser to mount network mounts, please remove '/etc/enigma2/automounts.xml' BEFORE tying to setup news ones.

    Team ViX Enchancements

    ViX Bootlogos, Radio Logo.
    ViX Team Spinner.
    ViX Team ViX_HD Skin.
    ViX Team softcam manager - Lots of changes have been made here. You can now choose whether you want to check whether your cams are running by pressing menu in the softcam screen. You can also check the status of your cam checks by pressing the info button. Also, lots of behind the scenes checks to ensure no restarts of cams when it is actually running.
    ViX Image Manager Update - This has been overhauled, and now has the option of creating a schedule to do daily, weekly or every 30 days backups for you.
    ViX Cron Manager Update - This has been updated to allow more detailed and specific cron jobs to be created.
    ViX Single EPG (with channel preview) - This has been updated to now support picons.
    ViX Release notes - This is just a little screen within the Menu -> Information -> About, that appears when you press EPG/Info button, to tell you the latest updates for the image.
    ViX Update Checker - This is a feature that lets you know of any available online updates by a little globe symbol in the infobar. This is set to check every 12 hours whether there are any updates for the image (can be changed in settings). If so, the icon will change from inactive to active...
    ViX Logs Manager - This allows you to manager your crashlogs and system logs (if enabled). If you have a crash, you can email your bugs to us directly from the image. Go to Menu -> Setup -> System -> Logs. When in the Logs Manager, you can edit the configuration to show your forum username, and your email address by pressing the Menu button. Please ensure you do this before submitting logs!
    ViX Settings - These are now found in the main System Menu.
    ViX Simple TV List - This is a simple selection to show your bouquet lists, just showing the channels and current event (if in EPG). To access the Simple TV List, do a long up/down arrow button press. You can customised it to be the default option instead of Full Screen Channel List, in which case, Up/Down buttons are reversed. It can also be set in the ViX Settings for the TV button.
    AutoTimer plugin integrated into image - Create an AutoTimer (Series Link), using Blue button in Current Channel EPG info. This has been updated to use threading, so that it will work in the background. No more spinning when checking for lots of timers. Default behaviour has been changed so that it does not check in standby only, and will check every 30 minutes.
    CCcamInfo - CCcamInfo plugin built directly in to image.
    OscamInfo - OscamInfo plugin built directly in to image.
    Blindscan Support Added - This allows you to access blindscan within the Service Scanning menu.
    CrossEPG - Updated to latest release to allow better EPG importing.
    Movie Player - Now, when playing a recorded item, you can search EPG and add Auto Timers for the particular recording. When watching your recording, press yellow to search the EPG, then press blue to add an AutoTimer.

    Button Mappings

    Short Red** & *** - Show current channel EPG info (ViX Single EPG).
    Long Red*** - Show current event.
    Short Green** & *** - Timers.
    Long Green*** - AutoTimer Timers.
    Short Yellow*** - EPG Search.
    Long Yellow*** - IMDB Database.
    Short Blue - Extensions.
    Long Blue*** - Plugins Menu.
    EPG - Opens ViX EPG.
    Left/Right** - Opens ViX QuickEPG.
    Up/Down** - Open Full Screen Channel List.
    Long Up/Down** - Open Simple TV List.
    TV Button** - Open Full Screen Channel List.
    Long TV Button - Open Bouquets List.

    ** Can be changed in ViX Menu
    *** Can be turned off in ViX Menu

    Known Bugs

    "Link-Icon" in network doesn't show up (= grey instead of green).
    Radio mp3 stream crashes after some time (sometimes only > 1 hour). Once that occurs, TV is also without sound. A reboot is then required. There might be a relation with Shoutcast (in use or just installed).
    A second subtitle in AVI, MP4 etc doesn't show up. Debugging in E2 just stops.
    In Partnerbox (remote TV-Player) the audiobutton causes a crash.6


    Special Thanks

    rytec - for his continued support.
    PLi Team for their great base image and allowing us to use it.
    zoka.cc for his Picon sets
    Coolman and all other developers for their plugins used in the feeds of this image.
    All of the ViX Beta team for their hours of testing and dedication on getting this image and DTT working


  3. #3

    korn's Avatar
    Join Date
    Dec 2010
    Location
    SatDreamGr
    Posts
    51,779
    Rep Power
    2484980
    New VIX Image ET9000 - v2.2.100
    21/07/2011 - Open ViX 2.2.100
    Based on Open PLi 2.0


    From VIX Team

    Enigma: 21-07-2011.
    Enigma Plugins: 21-07-2011.
    GCC Version: 4.4.4.
    Kernel Version: 2.6.18.
    Drivers: 2011-06-25.

    If you wish to perform an online update, then you will be able to upgrade your v2.2 image to v2.2.1 via the online functions. This full image is available for those who do not have online functionality on their box, or wish to perform a full reflash...

    Team ViX Enchancements

    New Features

    BackupManager - Lets you create scheduled backups of your system files (not full Image like Image Manager).
    RestoreWizard - This a wizard that detects and restores you backup (created with BackupManager), with option to restore your extra plugins.
    ImageManager - Major code rewrite, now handled by Job task, view progress of image creation in extension list (blue button)
    ViX Menu - Added PackageManagement & Software Update, so SoftwareManager is now not needed. It is also now translatable into different languages.
    NetworkInadyn - Add new network setup screen Inadyn.
    OScam/CCam Info - Added options to show in Extension List. (the Menu item will now only show IF the softcam is installed).
    OnlineVersionCheck - Added option to disable online check by setting check value to '0' and set a maximun timer to 48 hours.
    Recording List - Added a new option in MovieList Settings to use a "Slim" list like the "Slim" Channel slection screen.
    EPG Graphical - This is now in core, no longer a plugin (was ViXEPG), added the option to show Bouquets on launch.
    EPG Menu - Add Load/Save item, this allow you reload/save the EPG cache.
    E2-Plugin's - Updated all to plugin's to the latest GIT from PLi.
    ZAP Timer - This will create a zap timer (rather than a recording timer) for the selected event in the EPG/Single EPG etc. To activate this, select the event from the EPG, and do a long button press on the record button. This is a non-configurable timer, so will use all defaults, and just set the record to a zap, rather than a record. When adding a zap timer, the clock icon will show on the previous event. This is to do with the pre-start timer.

    Fixes

    SwapManager - Code cleanup, for better activation/detecion.
    About Screen - Updated infomation screen, better layout, more information. VFD now shows image version.
    EPG Search - Fix a bug where the yellow button just opened a blank EPGSearch screen instead of actually perfoming a search on the current event. Also, added 'Show History' to long yellow button press whilst in EPGSearch.
    EPG Cache - Updated so now it does not require 2 reboots in order to use new location.
    EventView - Fix GS on opening Similar List.
    PluginBrowser - fix it not installing picons.
    ShoutCast - Fixed plugin.
    SoftcamManager - Add Timercheck for OScam to support no username or password in Webif, fix GS when pressing coloured buttons, if no softcams installed, also code clean up.
    Translation - Updated NL language files.
    Permantent TimeShift fix and embed PTS.
    Updated KeyMap - Fixes a few MoviePlayer remote control issues.
    ViX HD skin - PNG fix for selected items in lists, Tweaked the Jobview screen, 'New Online Version' icon now flashes to remind you of an update.
    VIXEPG fix - The < > keys for jumping +/- 1 day.
    NetworkBrowser - fix GS when creating CIFS mounts.
    RemoteSetup fix GS when showCoolTVGuide is selected.


    Button Mappings

    Short Red** & *** - Show current channel EPG info (ViX Single EPG).
    Long Red*** - Show current event.
    Short Green** & *** - Timers.
    Long Green*** - AutoTimer Timers.
    Short Yellow*** - EPG Search.
    Long Yellow*** - IMDB Database.
    Short Blue - Extensions.
    Long Blue*** - Plugins Menu.
    EPG - Opens ViX EPG.
    Left/Right** - Opens ViX QuickEPG.
    Left/Right** - Opens ViX QuickEPG.
    Up/Down** - Open Full Screen Channel List.
    Long Up/Down** - Open Simple TV List.
    TV Button** - Open Full Screen Channel List.
    Long TV Button - Open Bouquets List.

    ** Can be changed in ViX Menu
    *** Can be turned off in ViX Menu

    Known Bugs

    Second subtitles in AVI, MP4 etc often need a stepskip to enable them to show up.
    Shoutcast has no genrelists and menu is not working.


    Special Thanks

    rytec - for his continued support.
    PLi Team for their great base image and allowing us to use it.
    zoka.cc for his Picon sets
    Coolman and all other developers for their plugins used in the feeds of this image.
    All of the ViX Beta team for their hours of testing and dedication on getting this image and DTT working





















  4. #4

    korn's Avatar
    Join Date
    Dec 2010
    Location
    SatDreamGr
    Posts
    51,779
    Rep Power
    2484980
    There are online updates for the Vix image to bring you up to version Vix 2.2.109



    after the update go to information/about/info to see release notes

  5. #5

    korn's Avatar
    Join Date
    Dec 2010
    Location
    SatDreamGr
    Posts
    51,779
    Rep Power
    2484980

    Απ: latest VIX Image ET9000

    ViX Team ET9x00 Image v2.3 -07/12/2011









    New VIX Image ET9x00 - v2.3
    07/12/2011 - Open ViX 2.3



    From VIX Team

    Enigma: 07-12-2011.
    Enigma Plugins: 07-12-2011.
    GCC Version: 4.4.4.
    Kernel Version: 3.1.0.
    Drivers: 2011-11-05.

    This image requires the latest bootloader (attached to this post) to be flashed. This is because Xtrend have changed the way the drivers work. So, before updating your image, you will need to first flash the bootloader, then flash the new image. Flashing of new bootloader only takes a few seconds, so once flashing's completed, then just turn off the box, transfer the new image to the usb stick, and flash with that. Also, it is recommended to NOT use older images with this new boot loader, as this may result in a bricked box.

    Because of a lot of changes behind the scenes of the image and building, you will not be able to perform an online update. A full flash is required for this version of ViX image.

    This revision of the image has undergone many different builds, hours and hours of coding/fixing, and we hope that you are now happy to reflash with the latest ViX image!

    Team ViX Enchancements

    New Features

    Updated to kernel 3.1.0 - This new kernel is much faster and better than the previous kernel, and finally you all get to test it if you held off updating to other images. If you did update, you can finally come back to the ViX image
    VFD Icons fully working - Unique to the ViX image. The VFD icons on the front of the box are working correctly how the manufacturer intended them. Seperate icons for Timeshift (rather than using the recording icon), Sat icons, LAN icon, USB icon and HDD icons, all working perfectly. View the pictures below to see what they look like.
    Added items to the Information Screen - Added Devices and System Information to Menu -> Information. In Devices, you get all the information about connected devices on your box (HDD, USB and Network Shares), and System Information will show you your memory on your box (Swap, Free memory etc). See screenshots below for more information.
    Added OSD Settings - This replaces the overscan option within the ViX image. Go to Menu -> Setup -> System -> OSD -> OSD Setup, and ensure the screen fills your TV set exactly to ensure that all menu options are shown correctly for your TV.
    Updated Blindscan - Now, ET9000 and Vu+ Uno both have blindscan ability incorporated in to the image. And, best of all, a nice simple scan routine for it. You can choose to scan all horizontal and vertical polaritys, as well as high and low bands all in one pass. Save having to run the blind scan for each individually :thumsbup:.
    Added support for HDMI-CEC - This image now allows you to control your box using your tv remote. Remember, this is still experimental at the moment, and can work differently between different brands of TV makes/models.
    Added uShare - Allow the box to be detected by your DLNA devices that support this protocol. This can be configured under Menu -> Setup -> System -> Network -> uShare Setup.
    Added MiniDLNA - Same as uShare, but some people were having problems with uShare, so we have added a different version for people to use.
    Added AFP - The Apple Fileshare Protocol makes it easy for your OSX devices to find your box and use the box natively within the OS. This can be configured from Menu -> Setup -> System -> Network -> AFP Setup.
    Added EPG Automatic Refresh - This is useful for members who keep a single EPG datasource on a network share with multiple boxes. In Menu -> Setup -> System -> EPG -> Settings, you have the option to choose a network location (as long as configured within the Mount Manager). If you use this, you might want to update the EPG data from this location automatically. So now you can using the Automatic Refresh option.
    Added Automounts option - This allows the box to automatically recreate network mounts. If you've had times where the NFS of CIFS server has been restarted, or lost power etc, then you'll know that your box cannot access this network share. Well, as long as you have configured the share through the Mount Manager, then you can configure the Automount to automatically remount the share as often as you like by going to Menu -> Setup -> System -> Network -> Devices -> MountManager.
    Default Skin Change - The Default skin has been changed from ViX HD to ViX Night HD. This is a new ViX skin that has been developed for those who want a darker skin for their image. See the screenshots below for comparisons between the two. If you prefer the old ViX skin, it can still be downloaded from the download server, and is now called ViX Day HD. Please report any skin issues you may find with the ViX Night HD skin. We think we have them all covered, but can't be too sure...
    Many plugins translated/made translatable - Allows the plugins to display correctly the information in your own language (as defined on original setup).
    Deleted a number of plugins - Due to the "war on licences", a number of plugins whose license has changed, has been reverted to the non-licensed version of the plugin, or had to be removed from the image indefinitely.
    Added seekbar functionality to the image - Allow you to seek within a recording playback to where you would like to be within the playback. To utilise this, please hold down the << or **** buttons on your remote, and the seekbar will appear at the top. Use the arrow keys on the remote to choose where you would like to seek to in the playback, and press OK to start playback from this point.
    Added Image Download to Image Manager - This allows you to download the latest full image from the server, and flash it to your box (Vu Only). To access this, go to the Image Manager from with ViX menu, and press the help button. This will list all available images to download.
    Added playback support for FLV files - Now you can add FLV files to your recordings drive and play them natively within the system.
    Lots more under the hood updates/enhancements - A few menu options and screens have become more integrated to their respective menus. For example, the Recording Paths menu is no longer required, as Timeshift Path is defined in Timeshift Setup, and Recording Path in Recording Setup.

    Fixes

    Tweaked SoftCam manager.
    Corrected a number of plugins.
    Updated network components, including better support for WiFi.
    Updated translatability; updated German & Dutch translations.
    Hidden several ViX-core functions from the plugin-browser.
    Better handling of SWAP partitions by the Mount Manager.
    Tweaked TimeShift Code.
    Remove SD/HD split from ChannelSelection as it was buggy.
    Magic skin updates
    MenuSort fix.

    Button Mappings

    Short Red** & *** - Show current channel EPG info (ViX Single EPG).
    Long Red*** - Show current event.
    Short Green** & *** - Timers.
    Long Green*** - AutoTimer Timers.
    Short Yellow*** - EPG Search.
    Long Yellow*** - IMDB Database.
    Short Blue - Extensions.
    Long Blue*** - Plugins Menu.
    EPG - Opens ViX EPG.
    Left/Right** - Opens ViX QuickEPG.
    Left/Right** - Opens ViX QuickEPG.
    Up/Down** - Open Full Screen Channel List.
    Long Up/Down** - Open Simple TV List.
    TV Button** - Open Full Screen Channel List.
    Long TV Button - Open Bouquets List.

    ** Can be changed in ViX Menu
    *** Can be turned off in ViX Menu

    Known Bugs

    Nope

    Special Thanks

    rytec - for his continued support.
    zoka.cc for his Picon sets
    Coolman and all other developers for their plugins used in the feeds of this image.
    All of the ViX Beta team for their hours of testing and dedication on getting this image and DTT working



    Requests

    If anyone is interested in doing any translation work for the plugins and the image itself, please contact either Andy of Sicilian...

    Screenshots

    Information Menu:


    About:


    Device Information:


    System Information:



  6. #6

    korn's Avatar
    Join Date
    Dec 2010
    Location
    SatDreamGr
    Posts
    51,779
    Rep Power
    2484980

    Απ: latest VIX Image ET9000

    Online Update for ET9x00






    [IMG]http://desmond.**************/Himg843/scaled.php?server=843&filename=infosk.jpg&res=medium[/IMG]

    Online Update for ET6x00 now active to bring to Build 204.
    Also available below is the USB File for flashing a clean build of 204.
    Enjoy it guys.

    2.3 Build 204:
    enigma2: LogManager update for log locations.
    enigma2: CrashLogs, both types (normal crashlog and Debuglog) now share the same location (user definable) the new default is '/home/root/logs'
    enigma2: EpgSelection, fix multiepg channel preview and clean up all epg code.
    enigma2: fix issue with timers and standby and new trashcan.
    enigma2: EPGSelection: graphical epg update.
    enigma2: TrashCan: fix possible error screen, Deepstandby issues.
    enigma2: InfobarGenerics: fix 2nd info bar timeout.
    feeds: add 'dvb-usb-af9035'
    linux: add dvb-usb patches by Gennar1 (etx000 and vuplus)
    xmltv-importer: add auto creation of swap in needed.
    ViX-core: BackupManager: now allows more than one backup per day.
    ViX-core: RestoreWizard: now does not show if no backup are found, also backups are now listed last backup at top of list, also fixed a bug where if a device did not have any backups on but another did both devices listed same backups.
    ViX-Night/Day skins: updated QucikEPG to include description.

  7. #7

    Απ: latest VIX Image ET9000

    2.4 Build 112:

    ViX 2.4-112 NOW ONLINE

    This update is largely un-tested therefore would all users please backup their images prior to updating. To update to 111 you will need to enable unstable updates. Menu > Setup > System > Online update > Set allow unstable updates to YES.

    enigma2: HelpMenu: fix posible BSOD.
    enigma2: fix 3D setting on Vu's.
    openwebif: add new ViX setting menu to Menu Panel (still needs work).
    picons: update zonka.cc to 2012-05-17
    system: merge from PLi 18-05-2012 - this includes Linux 3.3 for ET's.
    vix-skins: update transponder info for new PliExtraInfo, fix simple channelselection screen title.

    DOWNLOAD

  8. #8

    Απ: latest VIX Image ET9000

    OpenViX 2.4-119 ONLINE NOW

    Code:
    2.4 Build 119:
    enigma2: PliExtraInfo, fix for terestrial tuners.
    enigma2: more detailed MemoryInfo screen thanks to Ralf.
    translations: updates, thanks 'jerry00', 'Ralf', 'Rob'
    vix-skins: fix IMDB stars (thanks regarto)

  9. #9

    Απ: latest VIX Image ET9000

    OpenViX 2.4-124 NOW ONLINE


    2.4 Build 124:
    feeds: remove channelsettings, bootlogos & picons by silverfox0786 at his request.
    Translations: CS update thanks 'jerry00', 'Rob'

    http://www.sendspace.com/file/zl6ewk

  10. #10

    Απ: latest VIX Image ET9000

    OpenViX 2.4-128 NOW ONLINE
    Code:
        2.4 Build 128 changelog:
    
        enigma2: made DolbyDigital audio tracks default, as most channels use NAR on pcm tracks.
    http://www.sendspace.com/file/z0e07q

Page 1 of 9 12345 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. ET9000 - what image?
    By Robinson in forum SatDreamGr Images Chat
    Replies: 8
    Last Post: 02-11-17, 23:42
  2. Power of Dream HD+ Image for ET9000
    By korn in forum Images Clarke-Tech & Xtrend
    Replies: 31
    Last Post: 08-04-14, 11:52
  3. xtrend et9000
    By verfot in forum Μικρές αγγελίες
    Replies: 4
    Last Post: 03-07-13, 21:34
  4. X TREND ET9000
    By verfot in forum Μικρές αγγελίες
    Replies: 1
    Last Post: 09-01-13, 19:19
  5. Meoboot for Et9000
    By Dr.Dream in forum Multiboot Clarke-Tech & Xtrend
    Replies: 0
    Last Post: 26-01-11, 09:10

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •