Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: VTi "Vu+ Team Image Solo se"

  1. #1

    korn's Avatar
    Join Date
    Dec 2010
    Location
    SatDreamGr
    Posts
    51,779
    Rep Power
    2484980

    VTi "Vu+ Team Image Solo se"

    VU+ > VTi "Vu+ Team Image Solo SE" - V 7.0.0 - 17.07.2014

    Vom VTi Team
    VTi Panel (Blaue Taste)

    Mehrsprachig:
    Englisch, Deutsch, Niederländisch, Italienisch, Türkisch, Dänisch,
    Polnisch, Russisch, Ukrainisch, Tschechisch, Arabisch, Französisch,
    Schwedisch, Portugiesisch (Portugal), Griechisch, Bulgarisch, Ungarisch

    Mit modularem, flexiblem VTi Skin: Atile HD
    Eigene Bootlogo's und Radiomode Logo.
    Kurzer Druck auf die Blaue Taste öffnet direkt das VTi Panel, ein langer Druck hingegen das Pluginmenü
    Unterstützung von USB-Kartenlesern mit FTDI Chipsatz (Smargos,Easymouse2 etc.)
    Gestartetes Softcam wird in der Infobar angezeigt
    Filmauswahl (MovieList) mit erweiterter Funktionalität
    Unterstützung für Image Sicherung und Wiederherstellung
    Unterstützung für Online VTi Image Flash
    Wiederherstellung von Plugins, Bouquets, Einstellungen, etc. schon während der Installation möglich
    Deinstallation nicht gewünschter Pakete schon während der Installation möglich (VTi Zero)



    New VTi "Vu+ Team Image" - v. 7.0.x - 2014.07.17

    From VTi Team
    VTi Panel (Blue Button)

    Supported languages:
    English, German, Dutch, Italian, Turkish, Danish, Polish,
    Russian, Ukrainian, Czech, Arabic, French, Swedish,
    Portuguese (Portugal), Greek, Bulgarian, Hungarian

    With modular, flexible VTi Skin: Atile HD
    VTi Bootlogos and Radiomode Logo.
    Short press on blue button opens VTi Panel, long press opens Pluginmenu
    Support for FTDI chipset cardreader like smargo and easymouse2
    Running Softcam shown in the Infobar
    MovieList with extended functions
    Support for full image backup and restore
    Supports VTi image flash online
    Restore Plugins, Bouquets, Settings, etc. during installation
    Remove preinstalled packages during installation (VTi Zero)

    !!! WICHTIG !!!


    Vu+ Duo² : Die Funktion WOL (Wake on Lan) benötigt einen aktuellen Bootloader
    Vu+ Duo : Images ab VTi 3.2 bzw. Original Image 6.0 benötigen einen aktuellen Bootloader
    Vu+ Solo : Images ab VTi 4.0 bzw. Original Image 7.0 benötigen einen aktuellen Bootloader
    Vu+ Uno : ab Treiber 2012-08-20 wird die FPGA Firmware >= 4.5 benötigt
    Vu+ Ultimo : ab Treiber 2012-08-20 wird die FPGA Firmware >= 4.5 benötigt

    HowTo FPGA Upgrade: click
    HowTo Bootloader Update: click

    Bitte KEINE Plugins oder Skins (Renderer, Converter) verwenden die nicht für Python 2.7 kompiliert (Pakete ohne Sourcecode)


    !!! IMPORTANT !!!


    Vu+ Duo² : Function WOL (Wake on Lan) needs current Bootloader
    Vu+ Duo : Images since VTi 3.2 or genuine image 6.0 needs current bootloader
    Vu+ Solo : Images since VTi 4.0 or genuine image 7.0 needs current bootloader
    Vu+ Uno : for drivers >= 2012-08-20, FPGA firmware version >= 4.5 is needed
    Vu+ Ultimo : for drivers >= 2012-08-20, FPGA firmware version >= 4.5 is needed

    HowTo FPGA Upgrade: click
    HowTo Bootloader Update: click

    Please, do NOT use plugins or skins (converter, renderer) which are not compiled (packages without source code) for python 2.7



    !!! BELANGRIJK!!!


    VU+ DUO : Image vanaf VTI 3.2 of het origineel Image 6.0 moet de actuele Bootloader eerst laden
    VU+ SOLO : Image vanaf VTI 4.0 of het origineel Image 7.0 moet de actuele Bootloader eerst laden
    VU+ UNO : voor de drivers van >=2012-08-20, dienen het nieuwe FPGA firmware te updaten >= versie 4.5 is noodzakelijk
    VU+ Ultimo : voor de drivers van >=2012-08-20, dienen het nieuwe FPGA firmware te updaten >= versie 4.5 is noodzakelijk

    Hoe FPGA Upgrade: click
    Hoe Bootloader Update: click

    A.U.B,
    gebruik GEEN plugins of skins (converter, renderer) welke niet zijn
    samengesteld (packages without source code) met python 2.7




    CHANGELOG

    - Treiber: 15.07.2014 (Solo, Duo, Solo², Duo², Solo SE)
    - Treiber: 16.07.2014 (Uno, Ultimo)
    - Kernel 3.13.5 (Solo², Duo², Solo SE)
    - Kernel 3.9.6 (Duo, Solo, Uno, Ultimo)
    - Standardkanalisten und Bouquets aktualisiert
    - Opera HbbTV (2014-07-17)
    - IPtables Unterstützung entfernt
    - Enigma2 (2014-07-17)

    • PiP / SplitScreen : fix Kanalauswahl nach Sendertausch
    • PiP / SplitScreen / AudioZap: Fenster für Wechsel des Sender auswählbar/umschaltbar
    • neue Funktion für erweitertes PictureInGraphic
    • Funktion für Taste lange "EXIT" einstellbar
    • Funktionsaufruf für Doppelklick auf Taste "0" einstellbar
    • Optimierte Texteingabe bei der virtuellen Tastatur (SMS - Style)
    • Unterstützung für Mehrfachauswahl in der Filmliste
    • Papierkorbfunktion in der Filmliste



    Basiert auf Vu+ OpenEmbedded Repository 2.1
    --> Änderungen von Vu+ : http://code.vuplus.com


    ------------------

    CHANGELOG
    - driver: 15.07.2014 (Solo, Duo, Solo², Duo², Solo SE)
    - driver: 16.07.2014 (Uno, Ultimo)
    - kernel 3.13.5 (Solo², Duo², Solo SE)
    - kernel 3.9.6 (Duo, Solo, Uno, Ultimo)
    - update default service list and favourite bouquets
    - Opera HbbTV (2014-07-17)
    - support for IPtables removed
    - Enigma2 (2014-07-17)

    • PiP / SplitScreen : fix service selection after PiP swap
    • PiP / SplitScreen / AudioZap: add function to toggle zap focus
    • new extended PictureInGraphic (PiG) function
    • default function for button long "EXIT" is configurable
    • double click function for button "0"
    • optimized virtual keyboard (SMS style input)
    • support multiple selection in movie list
    • add trash function to movie list


    Based on Vu+ OpenEmbedded Repository 2.1
    --> changes from Vu+ : http://code.vuplus.com


    DOWNLOAD

  2. #2

    korn's Avatar
    Join Date
    Dec 2010
    Location
    SatDreamGr
    Posts
    51,779
    Rep Power
    2484980

    Απ: VTi "Vu+ Team Image Solo se"

    VTi "Vu+ Team Image Solo SE" - V 7.0.1 - 04.11.2014

    Update 04.11.2014

    - increase image version --> VTi 7.0.1
    - update drivers (2014-10-29)(duo2)

    [*]fix dual DVB-T2/C tuner in changing mode


    - update dvbapp2 (2014-11-03)

    [*]fix number zap in MoviePlayer[*]support skinable scrollbars at ScrollLabels[*]fix PiG bug at service scan[*]fix moving movies to trash at movie end menu[*]remove duplicate entry in VTi setup[*]tiny cosmetics in timer list[*]update de translation by @JAKuhr --> THX[*]update cs translation by @Roxy --> THX[*]update pl translation by @kapciu75 --> THX


    - update dvbapp2 plugins for translation
    - update picons transparent by stefanbenno6 (2014-10-25)
    - update plugin filebrowservti (ver. 1.3-20140927-r0)
    - update plugin OpenWebIF (ver. 0.4.3 2014-11-03)
    - update plugin webradiofs (ver. 12.52)
    - update skin alien-hd (ver. 1.2)
    - update skin AtileHD (ver. 2.2-r1)
    - update skin balance-hd (ver. 2.1)
    - update skin black-shadow-hd (ver. 1.4)
    - update skin black-white1-hd (ver. 1.3)
    - update skin black-white2-hd (ver. 1.6)
    - update skin black-white-hd (ver. 1.8)
    - update skin blue-ocean-hd (ver. 0.6)
    - update skin blue-shadow2-hd (ver. 1.2)
    - update skin blue-shadow-hd (ver. 2.0)
    - update skin captain-amerika-hd (ver. 1.1)
    - update skin high-tech-hd (ver. 1.9)
    - update skin MuteSpectator (ver. 1.0-r2)
    - update skin oval-hd (ver. 1.4)
    - update skin scifi-hd (ver. 1.2)
    - update skin surface-hd (ver. 1.4)

    DOWNLOAD

  3. #3

    korn's Avatar
    Join Date
    Dec 2010
    Location
    SatDreamGr
    Posts
    51,779
    Rep Power
    2484980

    Απ: VTi "Vu+ Team Image Solo se"

    VTi "Vu+ Team Image" - v. 8.1.x -Vu+ SoloSe 29.12.2014 BETA



    !!! WICHTIG !!!


    Die Software ist als "Beta" deklariert und kann kritische Fehler enthalten.
    Die entsprechenden Fehlermeldungen werden gerne im Supportthread aufgenommen.


    !!! IMPORTANT !!!


    This software is a beta release, so it is possible that critical errors occurs.
    Please report errors in the support thread

    CHANGELOG
    - XBMC available
    - OpenGL-Support for dvbapp2 (animations)
    - Kernel 3.13.5
    - enigma2 (2014-12-29)
    - setup for animation speed
    - additional skin attributes for animations (NoAnimationAfter="on" / Animation="disable" or "disbale_onhide" or "disable_onshow")
    - Skins which are using new skin attributes: AtileHd and MuteSpectator

    Thanks goes to Vu+ for supporting OpenGL and XBMC





  4. #4

    korn's Avatar
    Join Date
    Dec 2010
    Location
    SatDreamGr
    Posts
    51,779
    Rep Power
    2484980

    Απ: VTi "Vu+ Team Image Solo se"

    VTi "Vu+ Team Image" - v. 8.2.x - 03.04.2015

    CHANGELOG
    - driver: 03.04.2015
    - kernel 3.13.5 (Solo², Duo², Solo SE, Zero)
    - kernel 3.9.6 (Duo, Solo, Uno, Ultimo)
    - xbmc pre-installed (Solo², Duo², Solo SE)
    - support for GUI animations (Solo², Duo², Solo SE)
    - build python with IPv6 support
    - update AtileHD skin
    - update and enhance functionality of GraphMultiEPG plugin
    - update default services
    - update OpenWebIF
    - use lsusb with all functions (no busybox lsusb)
    - Enigma2 (2014-04-02)

    add option to deactivate timer(button STOP or GREEN LONG), THX @busch
    add many skin parameters (improved FullHD skin support) THX @hmmmdada
    extend dvbapp2 core for additional skin parameters for config lists textOffset, secondfont)
    add option to save parental control pin when CI modules are in use
    show zap history (button EXIT in TV mode)
    save list style type and sort order folder based (MovieList)
    support parental control for movie folders
    support parental control for deleting movies
    add option to hide service name in service list
    add option for double-spaced service list
    support for any picon size in service list
    SkinPro is available for every skin not only AtileHD
    miscellaneous bug fixes



    Based on Vu+ OpenEmbedded Repository 2.1
    --> changes from Vu+ : http://code.vuplus.com

    Download

  5. #5

    korn's Avatar
    Join Date
    Dec 2010
    Location
    SatDreamGr
    Posts
    51,779
    Rep Power
    2484980

    Απ: VTi "Vu+ Team Image Solo se"

    VTi "Vu+ Team Image" - v. 8.2.x - 03.04.2015 (Vu+ Solo SE)



    Important Information 14.05.2015

    After updating from software dated before 2015/05/14 the tuner setup have to be repeated when unciable is in use.


    Update: 14.05.2015

    - update drivers (2015-05-11)

    fix tuner status information
    fix loop through(solose v2)
    fix Scart (duo2)


    - update dvbapp2 (2015-05-12)

    fix line break at TTX subtitles
    fix possible crash in networkwizard
    do not allow duplicate entries in zaphistory screen
    add JESS support by adenin (2015-04-21-adenin) -> THX @adenin
    add animation setup to start wizard (solose,duo2,solo2)
    change default animation to "simple fade" (solose,duo2,solo2)


    - update VTIPanel (ver. 3.01)

    VTi ZerO: add option to remove xbmc (solose,duo2,solo2)
    VTi ZerO: speed up removing of packages
    SoftwareManager: ask for skin selector after installin a skin
    SoftwareManager: ask for reboot only when needed


    - update AtileHD (ver. 3.0)

    add function to search for weather location
    split Atile HD in skin and plugin package


    - update ****-package nfs-server (ver. 2.2)

    fix broken install routine
    switch to rpcbind


    - update plugin coverfind (ver. 0.9)
    - update plugin filebrowservti (ver. 1.3)
    - update plugin PictureCenterFS (ver. 6.10)
    - update plugin PlanerFS (ver. 6.54)
    - update plugin tmdb (ver. 0.5)
    - update plugin WebradioFS (ver. 13.14)
    - update skin BlackWhite FHD (ver. 1.9)
    - update skin BlueWhite FHD (ver. 1.4)
    - update skin Full HD (ver. 2.9)
    - update skin Revolution FHD (ver. 1.8)
    - update skin White FHD (ver. 1.7)


    DOWNLOAD

  6. #6

    korn's Avatar
    Join Date
    Dec 2010
    Location
    SatDreamGr
    Posts
    51,779
    Rep Power
    2484980

    Απ: VTi "Vu+ Team Image Solo se"

    VTi "Vu+ Team Image" - v. 8.2.2

    Update 03.06.2015

    - increase image version - VTi 8.2.2
    - update dvbapp2 (2015-06-02)
    •MovieList add option to context menu for instant copy (hotplug devices)

    •use custom sort order for menu as default

    •custom sort order in menu and plugin browser can be reset with key 0

    •streamline sort order behaviour in menu and plugin browser


    - update drivers hmp-usb-dvb-t2-c
    •allow use in parallel mode with other devices (e.g. Vu+ turbo tuner)


    - update plugin autotimer (2015-06-01)
    •fix dvbapp2 shutdown bug


    - update plugin remotetimer (2015-06-01)
    •enable streaming services for remote timer


    - update xbmc (2015-06-01)
    •support 576/720/1080 skin resolution

  7. #7

    korn's Avatar
    Join Date
    Dec 2010
    Location
    SatDreamGr
    Posts
    51,779
    Rep Power
    2484980

    Απ: VTi "Vu+ Team Image Solo se"

    New VTi "Vu+ Team Image" - v. 9.0.x - 2015.10.24


    From VTi Team
    VTi Panel (Blue Button)

    Supported languages:
    English, German, Dutch, Italian, Turkish, Danish, Polish,
    Russian, Ukrainian, Czech, Arabic, French, Swedish,
    Portuguese (Portugal), Greek, Bulgarian, Hungarian

    With modular, flexible VTi Skin: Atile HD
    VTi Bootlogos and Radiomode Logo.
    Short press on blue button opens VTi Panel, long press opens Pluginmenu
    Support for FTDI chipset cardreader like smargo and easymouse2
    Running Softcam shown in the Infobar
    MovieList with extended functions
    Support for full image backup and restore (not Vu+ Solo 4K)
    Supports VTi image flash online (not Vu+ Solo 4K)
    Restore Plugins, Bouquets, Settings, etc. during installation
    Remove preinstalled packages during installation (VTi Zero)















    Basic image information
    Build tree: openvuplus-3.0 (more)
    Kernel: 3.14.28 (Solo 4K)
    Kernel: 3.13.5 (Solo², Duo², Solo SE, Zero)
    Kernel: 3.9.6 (Duo, Solo, Uno, Ultimo)
    Gstreamer: 1.4.5
    HbbTV-Browser: Opera (Solo², Duo², Solo SE, Zero)
    HbbTV-Browser: WebKit (Solo 4K)
    XBMC: 13.2 (Solo², Duo², Solo SE, Solo 4K)

    Known issues
    - Dual Tuner loopthrough not working - software update (coming soon) needed (Solo 4K)
    - Picture in Picture (PiP) not working - software update (coming soon) needed (Solo 4K)

    CHANGELOG
    - Standardpicons im Image vorinstalliert THX @stefanbenno6 (Duo², Solo 4K)
    - StyleFHD und MuteSpectator Skin vorinstalliert (Duo², Solo 4K)
    - Update "importiere externe Bouquets"
    automatische Suche für Server-STB's

    - Update OpenWebinterface (2015-10-19)
    - Update LCD4Linux (4.6-r0)
    - Update EyeSight HD Skin
    - Update VTiPanel
    Unterstützung für Solo 4K

    - Update Opera HbbTV (2015-10-01) (Solo², Duo², Solo SE, Zero)
    - Update Foreca plugin (2015-10-15)
    - Update SeriesPlugin (3.0.0)
    - Update EPGRefresh-Plugin
    Option zum Speichern der EPG Datei nach der Aktualisierung

    - Update dvbapp2 (2015-10-23)
    Skinauswahl während des Installationsassistenten
    erweiterter "About" - Screen (vgl. AtileHD)
    Untersützung von Sendernamen als Picon-Dateinamen
    Neue Sprungfunktion "SmartSeek" während der Wiedergabe von Aufnahmen (Einstellungen unter Menü>VTi>Einstellungen-Aufnahmen, Standardtasten: Steuerkreuz AUF/AB oder Taste 7 (zurück) 8 (aktivieren) 9 (vor)
    Neue Funktion: EPG Client/Server-Modus (Einstellungen unter Menü>VTi>Einstellungen-EPG) - im Client-Modus wird die EPG-Datei nicht geändert, EPG Daten können automatisch alle X Minuten in/aus EPG Datei gespeichert/geladen werden (Server/Client)
    Fehler in der Zuweisung von Sendern zu CI-Modulen behoben
    Neue Funktion "Letzte Aufnahmen" in der Filmliste (Einstellungen unter Menü>VTi>Einstellungen>Aufnhamen und Menü>Einstellungen>System>Aufnahmepfade: Ort der Informationsdatei) - Tipp: durch Verlagerung der informationsdatei auf einen Netzwerkspeicher kann diese Funktion boxübergreifend verwendet werden
    Unicable: Beginn der Indexierung der SCR's bei 0



    ------------------

    CHANGELOG
    - include default picons THX @stefanbenno6 (Duo², Solo 4K)
    - include StyleFHD and MuteSpectator skin (Duo², Solo 4K)
    - update RemoteChannelStreamConverter
    add auto scan for server STB's

    - update OpenWebinterface (2015-10-19)
    - update LCD4Linux (4.6-r0)
    - update EyeSight HD skin
    - update VTiPanel
    support Solo 4K

    - update Opera HbbTV (2015-10-01) (Solo², Duo², Solo SE, Zero)
    - update Foreca plugin (2015-10-15)
    - update SeriesPlugin (3.0.0)
    - Update EPGRefresh plugin
    add option to save EPG file after refresh

    - update dvbapp2 (2015-10-23)
    skin selction during start wizard
    advanced "About" - screen (see:. AtileHD)
    support service names as picon filenames
    new skip function "Smartseek" during movie playback (config: Menu>VTi>Setup-Movies, default buttons cursor UP/DOWN or button 7 (backward) 8 (activate) 9 (forward))
    new function EPG client/server mode (config: Menu>VTi>Setup-EPG) - in EPG client mode the EPG file won't be changed, EPG data can be saved/loaded from EPG file automatically every X minutes (server/client)
    fix bug in CI assignment
    new function "latest recordings" in movie list (config: Menu>VTi>Setup-Movies and Menu>Setup>System>Recording paths: location for info file) - Hint: use a location which can be reached from more STB's to use the feature at more STB's at the same time
    Unicable: start indexing of SCR's at 0
    DOWNLOAD image

  8. #8

    nikolis123's Avatar
    Join Date
    Aug 2011
    Location
    καταγωγη καρδιτσα
    Age
    63
    Posts
    1,485
    Rep Power
    1578

    Απ: VTi "Vu+ Team Image Solo se"

    μπραβο φιλε χριστο αλου εκανα τιν εροτισι gia Vu+ Solo se και εσι εβαλες το καταλιλο image
    Με αρέσει ότι απαγορεύεται με αρέσει ότι δεν επιτρέπετε

  9. #9

    korn's Avatar
    Join Date
    Dec 2010
    Location
    SatDreamGr
    Posts
    51,779
    Rep Power
    2484980

    Απ: VTi "Vu+ Team Image Solo se"

    VTi 9.0.3



    Neues VTi "Vu+ Team Image" - v. 9.0.x - 16.05.2016

    16.05.2016 - Software Update

    - increase image version: VTi 9.0.3
    - update drivers (2016-05-16) (solo4k)

    • support FCC (Fast Channel Change)
    • support SD/HD transcoding in live TV mode ** Restriction : No Pip/MiniTV, Slow LCD Drawing
    • fix pluggable dual DVB-S2 problem when both A/B tuners are in use
    • Improve HDR
    • add proc entry to support some unicable equipments (needs a Solo4k Misc. plugin)
    • add proc encry for DVB-CI timing control (needs a Solo4k Misc. plugin)
    • fix misc. bugs


    - update dvbapp2 (2016-05-16)

    • [Common] support FastChannelChange - THX @vu+ Please disable dvbapp2 console logging when FCC is in use(solo4k)
    • [Common] fix 0 byte recording issue in linked tuner - THX @vu+
    • [Common] save cached configuration before dvbapp2 crash based GUI restart
    • [Common] gracefull shutdown of dvbapp2 at changing run levels
    • [Common] simplify unicable configuration with suggestions
    • [Common] improve media scanner behaviour recognize also IPK files
    • [Common] rework Audio/Subtitles screen
    • [Common] add option to change services with CHANNEL +/- buttons
    • [Common] rework startwizard
    • [Common] add option to enable/disable crash screen - disabled by default
    • [MovieList] change modification time of files when removing to trash
    • [Timeshift] fix black screen bug for service change at same transponder
    • [Timeshift] change some default configuration values
    • [Timeshift] allow deleting files older than 6 hours
    • [IPKG] use software manager for installing packages
    • [IPKG] log errors and use EPG button to show collected errors after software installation
    • [Subtitles] use Vu+ changes for setup subtitles style




    - update busybox</itemtext>

    • fix udhcp for some vlans




    - update youtubetv/chromium (ver. 2016-05-16) (solo4k)
    - update vtipanel (ver. 3.41)

    • [Common] change reboot behaviour after upgrade
    • [VTiZerO] fix removal of xbmc




    - add kodi to download feed (ver. 16.1) (solo2, duo2, solose, solo4k)
    - update plugin camofs (ver. 11.64)
    - update plugin enhancedmoviecenter (git 20160510)
    - update plugin fritzcall (rev. 1299)
    - update plugin multiquickbutton (ver. 2.7.15)

    • add function to enable/disable every button
    • PLEASE check your configuration after update




    - update plugin openwebif (ver. 0.4.7 20160509)
    fix rare crashes with mediaportal plugin


    - update plugin seriesplugin (git 20160409)
    - update plugin tectimetv (ver. 3.0)
    - update plugin webradiofs (ver. 14.45)
    - update plugin yamp (ver. 3.1.1 2016-05-09)
    - update skin atile (ver. 4.4-r0)
    - update skin cerxfhd (ver. 20160403)
    - update skin kerni-hd1r3 (ver. 20160221)
    - update skin mutespectator (ver. 3.1)
    - update skin stylefhd (ver. 2016-03-24)[/quote]

    Download


    vti-image-vusolose-20160516235358_vti_9-0-3_usb.zip 91.6 MB


  10. #10

    korn's Avatar
    Join Date
    Dec 2010
    Location
    SatDreamGr
    Posts
    51,779
    Rep Power
    2484980

    Απ: VTi "Vu+ Team Image Solo se"

    New VTi - Vu+ Team Image - VTi 11.0.x


    From VTi Team
    VTi Panel (Blue Button)

    Supported languages:
    English, German, Dutch, Italian, Turkish, Danish, Polish,
    Russian, Ukrainian, Czech, Arabic, French, Swedish,
    Portuguese (Portugal), Greek, Bulgarian, Hungarian

    With modular, flexible VTi skins
    VTi Bootlogos and Radiomode Logo.
    Short press on blue button opens VTi Panel, long press opens Pluginmenu
    Support for FTDI chipset cardreader like smargo and easymouse2
    Running Softcam shown in the Infobar
    MovieList with extended functions
    Support for full image backup and restore (not Vu+ Solo 4K / Uno 4K)
    Supports VTi image flash online (not Vu+ Solo 4K / Uno 4K)
    Restore Plugins, Bouquets, Settings, etc. during installation
    Remove preinstalled packages during installation (VTi Zero)



















    Basic image information
    Build tree: openvuplus-3.0 (more)
    Kernel: 3.14.28 (Solo 4K, Uno 4K, Ultimo 4K)
    Kernel: 3.13.5 (Solo², Duo², Solo SE, Zero)
    Kernel: 3.9.6 (Duo, Solo, Uno, Ultimo)
    Gstreamer: 1.6.4
    HbbTV-Browser: Opera (Solo², Duo², Solo SE, Zero)
    HbbTV-Browser: WebKit (Solo 4K, Uno 4K, Ultimo 4K)

    ------------------

    CHANGELOG

    - default skin: VuHD1080p (Solo 4K, Uno 4K, Ultimo 4K, Duo2, Solo2, Solo SE, Zero, Ultimo)
    - default skin: MuteSpectator (Duo, Solo, Uno)
    - Update OpenWebinterface -> ver. 1.x
    - Switch from libav to ffmpeg


    - Update dvbapp2


    • optimize showing available tuners (see: VuHD1080p skin)
    • CI improvements (e.g. scrambled DVB-S2 / DVB-T2 with H.265 codec)
    • display tuner name during tuner setup
    • show correct color button function in InfoBar (see: VuHD1080p skin)
    • display skin errors
    • support horizontal listboxes (THX @hmmmdada)
    • support eWall (THX @hmmmdada)
    • alternative service list (horizontal)
    • MediaPlayer: Skip to files with SMS-type input
    • SleepTimer: allow standby also when screens are opened
    • support power schedules
    • new EPG matrix mode (press help to see functions)
    • support automatic audio-/subtitle-track selection
    • support Autotimer in all preinstalled EPG views
    • show Choicelist with button "OK" for setup selections in setup screens
    • support HbbTV fpr remote channels
    • show search key at SMS-type input in service list (see: VuHD1080p skin)
    • map CH+/CH- button for page up / page down in setup screens
    • map button cross down to list old timeshift files
    • support autofs for network shares
    • support extplayer (serviceapp plugin by mx3l)


    Upgrade 9.0.X

    See below, which Vu+ Set-Top-Boxes can be upgraded online from version 9.0.X to 11.0.X:

    • Vu+ Ultimo
    • Vu+ Solo2
    • Vu+ Duo2
    • Vu+ Solo SE
    • Vu+ Zero
    • Vu+ Solo 4K


Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. VTi "Vu+ Team Image Solo 4K"
    By korn in forum Images VU+ Solo 4K
    Replies: 4
    Last Post: 27-04-19, 13:15
  2. VTi "Vu+ Team Image Solo"
    By korn in forum Images Vu Solo
    Replies: 19
    Last Post: 07-07-17, 20:38
  3. VTi "Vu+ Team Ultimo Image" OE 1.6
    By underconstruction in forum Images Vu+ Ultimo
    Replies: 11
    Last Post: 01-11-12, 20:07
  4. VTi "Vu+ Team Image Ultimo" - V 4.1 Greek mod by LSK
    By sat gr in forum Images Vu+ Ultimo
    Replies: 0
    Last Post: 03-03-12, 22:40
  5. Nemesis.Glassline for VTi "Vu+Duo Team Image" - V 2.7
    By korn in forum Enigma2 Skins ΟΕ 2.0
    Replies: 0
    Last Post: 03-06-11, 20:29

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •