I want that tool on the et9000 is it posible ? i cant find the plugin under extensions ?
I want that tool on the et9000 is it posible ? i cant find the plugin under extensions ?
Member SatDreamGr Projects
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
Ok thanks for the great answer
ps you are a Openpli member to ? i look many times to the topic of the Gstreamer 1.xxx
Last edited by cobus; 04-12-14 at 22:43.
Yes, SatDreamGr is based on OpenPLi and we are contribute back to base...
Member SatDreamGr Projects
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
Thanks for the Open Multiboot
Groetjes Cobus R
VU+UNO 4K DVB-C FBC SatdreamGR / Openpli
Xtrend ET10000 OpenPli /SatdreamGR DVB C & 1x DVB T(2)
FTA Ziggo
Can i put the multiboot on internal hdd instead of usb stick ?
Groetjes Cobus R
VU+UNO 4K DVB-C FBC SatdreamGR / Openpli
Xtrend ET10000 OpenPli /SatdreamGR DVB C & 1x DVB T(2)
FTA Ziggo
If you have SSD no probem, if you have normal HDD don't do that...
Code:https://github.com/oe-alliance/openmultiboot < device > has to be formated in ext4 < device > should be a fast usb-stick or ssd - not recommended to use a normal hdd as hdd would almost never stop spinning
Member SatDreamGr Projects
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
If i put multiboot on usb i dont see the internal hdd no more ?
Groetjes Cobus R
VU+UNO 4K DVB-C FBC SatdreamGR / Openpli
Xtrend ET10000 OpenPli /SatdreamGR DVB C & 1x DVB T(2)
FTA Ziggo
Member SatDreamGr Projects
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
in a few days,i will get back,my et9000 so we can do more tests and fixes.
but about the
did you tried it and happened? or just asking? normally there should be a /hdd mountpoint (to your harddisk) and a /usb mountpoint (with openmultiboot inside and...any other) and everything should be there...If i put multiboot on usb i dont see the internal hdd no more ?
ολα ειναι FLU
Member SatDreamGr Projects
There are currently 1 users browsing this thread. (0 members and 1 guests)