It is a known fact that Availink despite its exceptional multistream capabilities it is unable to cope with extremely low SR. Is is a driver issue? Is it a hardware issue? This question remains unanswered. What is certain is that this depends only on the manufacturer.
So nothing I can do...
GlamourAuraFHD skin - The vengeance of color
For OpenPLI/SDG images: https://github.com/MCelliotG/GlamourAuraFHD-skin
For OpenATV/OE-A images: https://github.com/MCelliotG/GlamourAuraFHD-ATV-skin
You can always check official documentation (and not so hard to find)
It mentions 1 to ~60, so everything below 1 would be a miracle to work.
https://github.com/availink/document...duct_brief.pdf
What's interesting (not in above document, is: GSE-High efficiency mode (GSE-HEM),GSE to TS conversion, I wonder if anyone ever played with those).
Member SatDreamGr Projects
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
Officially, yes, many demodulators state a lowest SR of 1000, even Silabs, but we know in reality it's not always the case...
https://www.silabs.com/tv-and-video/...ulators/si2166
[COLOR=inherit !important]
[/COLOR]
GlamourAuraFHD skin - The vengeance of color
For OpenPLI/SDG images: https://github.com/MCelliotG/GlamourAuraFHD-skin
For OpenATV/OE-A images: https://github.com/MCelliotG/GlamourAuraFHD-ATV-skin
thank you so much...for your helpOriginally Posted by mcelliot_g
mcelliot_g - one last wish....can you compile fedi2eti for OpenATV ? edi2eti is there...
I didn't compile anything (neither I have the knowledge), all files are precompiled and taken from SDG for testing.
Here's a new zip containing fedi2eti too.
GlamourAuraFHD skin - The vengeance of color
For OpenPLI/SDG images: https://github.com/MCelliotG/GlamourAuraFHD-skin
For OpenATV/OE-A images: https://github.com/MCelliotG/GlamourAuraFHD-ATV-skin
@mcelliot_g:
Hello.
So far I have NOT been able to decode the FAN3 channel.
I have Vu + Uno4K SE with OpenATV 6.4 image - that is the ARM platform.
I made a project according to posts # 34 and # 20.
As a result of the 30W, 10.810H scan, I get the result under DreamBoxEdit as below. Channel Type = DATA. SNR signal = 15.1 dB (91%)
https://naforum.zapodaj.net/747e433ea3f8.jpg.html
In post # 20, wrong channel parameters are given, eg FEC = 5/6, as below
https://naforum.zapodaj.net/bfc28e2fd49e.jpg.html
Is this a deliberate effect or do I need to correct it?
Do I need to operate:
- astra.conf entries
- supplementing satellites.xml with the definition of a 10.810H transponder?
Best regards.
But 2 (out of 4) Hispasat radio signals that lordgothic refers to, have SR 1041 and 1125, so there are within the suposed working range..... and they don't work !You can always check official documentation (and not so hard to find)
It mentions 1 to ~60, so everything below 1 would be a miracle to work.
Lower Dishes: 53/52'5/52 - 45 - 42 - 39 - 28'2 - 26/25'5 - 23'5 - 19'2 - 13 - 9 - 7 - 3 - East <------> West - 1 - 27'5 - 30
Upper Dishes: 36 - 30'5 - 21'6 - 16 - 10 - 4'8 - East <------> West - 4/5 - 7/8 - 12'5 - 15
Diseqc switches
Xtrend ET 10000 -- Octagon SF8008 4K TWIN S2X -- DM7020 HD (CardServer)
This is my exact configuration, hope it helps. Be sure to change the service reference in the favourites entry.
10810H.jpg
GlamourAuraFHD skin - The vengeance of color
For OpenPLI/SDG images: https://github.com/MCelliotG/GlamourAuraFHD-skin
For OpenATV/OE-A images: https://github.com/MCelliotG/GlamourAuraFHD-ATV-skin
As a result of using DreamBoxEdit and editing the lamedb file (as below), I got the same screen as your.
Post #20 point 7 has a error for IPTV service (named FAN3).0ce42a3a:0044:0000
s 10810000:30000000:0:6:-300:2:0:1:1:0:2:21:0:1
/
and
02a9:0ce42a3a:0044:0000:1:0
10810H SID 0x2a9
p:FAN3,c:030203,f:055
I have tried but am NOT able to improve it.
Can you provide your FAN3 service record?
Posting Permissions
Reply With Quote
