How to install image BlackHole Prism

1.Please download the latest version of Prism BlackHole image on this page and bring it to a zip file .
You'll find a directory update_ruby
0.jpg
2 . Now you need to format the USB flash drive as FAT32 and copy the folder " update_ruby " to the root of the USB storage
1.JPG

3 . Now connect the USB memory to the USB jack (found on the back of the box ) .

4 . Turn Prismcube - after some time , it will automatically begin to install the software , ADisplay will show UPDATE
3.JPG
The display will show the numbers and letters , as updated block by block flash on the field
4.JPG
4 When finished , you will be prompted to remove the USB memory - USB REMOVE
5.JPG
5 . After removing the USB memory stick in the back , the receiver will start running
6.jpg
It will take a few minutes to completely refresh , then you will have full access to the menu system .

Now you need to set up a new receiver , or przywrócićwcześniej saved.