How to take a Screenshot on Prismcube

1} Press the Menu button on your Remote control, in the Prismcube Menu, select Black Hole.
0.JPG

2} Press " Down" on your remote, and from the submenu select " Bh tools "
1.JPG

3} Now in this menu select " Map screenshot to rc button"
2.JPG

4} In this menu, you will see the option to select which button "XBMC" or " Mute " that you would like to use. After once you have picked one, just press OK
3.JPG

5} Now your setup must be saved, press OK and wait for the Prismcube to reboot.
4.JPG
Now you have the ability to take a screenshot, using your chosen button, but please remember it can only capture OSD, and not the tv picture.