Page 4 of 38 FirstFirst 12345678 ... LastLast
Results 31 to 40 of 373

Thread: DM800SE Clone Images Ο.Ε. 2.0 SIM 2 ssl84d

  1. #31

    Απ: DM800SE Clone Images Ο.Ε. 2.0 SIM 2 ssl84d

    Thanx for the info. Εγκατεστησα το Open pli 4.0 κι εγκαταστάθηκε σωστά. Ο driver της καρτας ομωσ δεν βλεπει το επίγειο tuner η καρτα θυμίζω ειναι το τριπλο tuner sat c και t μηπως γνωρίζει κανεις τι πρεπει να κανω για να ενργοποιήσω τα επίγεια?

  2. #32

    georgeflu's Avatar
    Join Date
    Jan 2011
    Location
    ptolemaida
    Age
    44
    Posts
    12,426
    Rep Power
    4091704

    Απ: DM800SE Clone Images Ο.Ε. 2.0 SIM 2 ssl84d

    μια λυση ειναι,να περασεις το Newmenu και απο εκει μενου ληψεων/dreambox/Tuner_driver κατεβαζεις τον trial tuner driver.
    ολα ειναι FLU

    Member SatDreamGr Projects

  3. #33

    Απ: DM800SE Clone Images Ο.Ε. 2.0 SIM 2 ssl84d

    Ευχαριστω δούλεψε τέλεια. Απλα αν δεν κανεις σάρωσει και δορυφορικών τοτε στα επίγεια βγάζει tune failed και προσοχη στο tuner να διαλέξουμε Europe DVB T και οχι Australia που ειναι by default

  4. #34

    korn's Avatar
    Join Date
    Dec 2010
    Location
    SatDreamGr
    Posts
    51,784
    Rep Power
    2484984

    Απ: DM800SE Clone Images Ο.Ε. 2.0 SIM 2 ssl84d

    Sim2-DM800SE-Newnigma2 LEAN v4.0.6 SIM2 #84d Jasper (2013-11-30)

    Clean, no changes.

    Sim2

    SSL84d

    Enigma2: 2013-11-18-tarball (thx gjstroom)

    #########################################################################################

    Webinterface is working.
    Teletext is working.

    #########################################################################################

    Deactivate Firmware Update (Newnigma2 Services/System Tools/System Settings)

    #########################################################################################

    No WLAN driver included (this is a feature of Newnigma Lean image):

    The following drivers are available on the online feed:

    Open a Telnet session to install or use Newnigma2 Services/Softwaremanager/Online Installation/show all packages to install:

    opkg install kernel-module-carl9170
    opkg install kernel-module-rt2800usb
    opkg install kernel-module-rt73usb
    opkg install kernel-module-r8712u
    opkg install kernel-module-zd1211rw
    opkg install r8192c

    reboot
    ###########################################################################################

    If you like to change the bootlogo:


    create a folder /boot in the root directory

    reboot

    Then you will find the bootlogo-dm800se.jpg in the /boot directory.

    ###########################################################################################
    Download:

    2013-11-30:


    https://mega.co.nz/#!IMpUAIiZ!dR4NGj...m1jgxkqZaX8e9Y



    Jasper


    ###########################################################################################
    Newnigma2 team proudly presents:
    Newnigma2 v4.0.6

    #####################################################################

    Basics:
    • Enigma2 4.0: 18.11.2013
    • Enigma2 Plugins: 29.11.2013
    • Newnigma2 Plugins: 29.11.2013


    DM 800 HD se
    • driver: 01.10.2013
    • secondstage: 84
    • kernel 3.2.51


    DM 800 HD se v2
    • driver: 01.10.2013
    • secondstage: 88
    • kernel 3.2.51


    Changes by DMM:

    changelog E2 15.08.2013:
    • fixed CEC poweroff message on enigma2 shutdown (deep standby)
      - dont send CEC poweron message on automatic timer wakeup
      - enigma2 will now boot into idle mode on automatic recordtimer wakeups
    • added virtual subservices for some HD services
    • fixed background and selection pixmap rendering in config lists
    • fixed possible crash on subtitle delivery when 3rd party skins don't define some mandatory values
    • added "HasSubtitles" converter option to ServiceInfo skin converter


    changelog E2 31.08.2013:
    • added "HasSubtitles" converter option to ServiceInfo skin converter
    • don't zap to last service after booting into idle mode (automatich timer wakeup)
    • DVDBurn: fixed Bludisc and DVD audio track language selection
    • changes for easier timer wakeup detection in plugins
    • HdmiCec: dont send poweron command when a idle mode request is pending or idle mode is active
    • added missing check to detect if the last automatic wakeup was a record timer wakeup
    • let subservice numbers start from 1 .. because 0 is used to zap between previous two services
    • fixed abortion/ending of service scan
    • fixed zap to last subservice in list via button
    • UPnPMediaRenderer: fixed log spam
    • UPnPMediaRenderer: some picture display improvements (fixed TV-Picture showing between two pictures)
    • fixed possible crash when skipping forwards/backwards with DVB subtitles enabled
    • changes for cleaner shutdown
    • fixed deadlock on jump forward/backward in MKV files
    • added a ServiceInfo converter workaround for types based on evVideoSizeChanged


    changelog E2 02.09.2013:
    • virtual subservices bugfix for cable
    • added legacy virtual subservices mode which can be enabled in usage config in normal case not needed (just for some broken cable providers.. but try first the normal mode)
    • added possibility to receive epg data via ts streaming (not used by our soft yet)


    changelog E2 07.09.2013:
    • fixed crashes on e2 shutdown
    • fixed crash on end of servicescan
    • added a more easy way to detect recording timer wakeups
    • speedup devicemanager
    • fixed incorrectly set harddisc idle time on hdds detected by hotplug
    • some stability improvements


    changelog E2 27.09.2013:
    • added ac3+ support (requires hw drivers with ac3+ support not DM8000/DM800HD)
    • improved storing config files on write-back enabled filesystems (ubifs, ext2, ext3 ....)
    • fixed some upnp issues (special char/umlaut issues, servers not showing up, minor fixes)
    • fixed subtitle synchronization (was broken on skip fwd/bwd since mkv deadlock fix)
    • fixed BlinkingLabel (thanks to Kashmir)
    • fixed crash on timer-based deepstandby wakeup
    • fixed shutdown on radio services with RASS
    • fixed software update on dm500hd / dm800se with external update tool
      (to get automatic updates again, an update via telnet/ssh shell is required once)


    changelog E2 01.10.2013:
    • extend pid cache for audio types other than AC3 and MPEG
      (required to store last selected ac3+ or aac audio tracks)
    • dont send CEC poweroff on idle to standby transition again
    • dont send CEC poweron on idle to standby transition
    • dont restart previous service on idle to standby transition
    • fixed rare crashes on e2 shutdown
    • call flush and fsync when storing parental control white/blacklist


    changelog E2 12.11.2013:
    • added unicable support for jultec JPS0501-8
    • added possibility to rename services/markers and bouquets via channelselection context menu
    • small storage manager fixes
    • changes to support picons for remote services (partnerbox)
    • fixed possible epgcache crash
    • fixed now event epg query when no next event is available
    • fixed endless loop caused by wrongly encoded service names on 10E 11221V 27500


    changelog E2 18.11.2013:
    • fixed greenscreen on cancel press during service/marker/bouquet rename
    • fixed a possible crash caused by plugins which doesn't check the return code of startTimeQuery..
    • fixed possible crash on screen close
    • fixed broken "ImageDefaultInstaller" (broken since 20131112 update)
    • fixed possible ConfigLocations crash (typo)



    Notice: Update from v4.0.x to 4.0.6 possible.

    Changes:
    • Added: Skin Evolution-HD by Kerni (thx)
    • Added: newnigma2.Kerni.PanTV-HD by Kerni (thx)
    • Added: Kerni.Gnome-HD by Kerni (thx)
    • Added: VideoDB V2.2 by Dr.Best (click here for more information) (thx)
      IMPORTANT: read here for your collections
    • Added: mediaportal
    • Added: swapmanager
    • Added: wget
    • Added: weathercomponent (needed for some skins)
    • Bugfix: Rebuild Picon handling/loading/caching (less memory consumption)
    • Bugfix: Newnigma2 Services fix getPNG cache failure (memoryleak)
    • Bugfix: Improved onlineinstaller cache handling (sometimes strange screen output)
    • Bugfix: neutrino keymap
    • Update: Some improvements on our onlineinstaller
    • Update: znc to version 1.2
    • Update: openvpn to version 2.3.2
    • Update: german translation
    • Update: mediaportal to version 4.9.2
    • Removed: we have removed non working plugins. most of them are integrated in mediaportal.
    • Removed: keymanger plugin from image. It's still available from our feed.
    • here u can find USB to UART driver
    • here u can find DreamUP V1.3.3.11



    Info: since release of e2 v. 3.2 there is no dm7025 support yet. that's what dmm said.
    Multiboot: No support for multiboot. Not planned. No need for such a tool.
    GP3wizard: No support for gp3wizard. Probably not running. Not needed in Newnigma2 environment.

    Important changes:

    1. Install picons on USB-Drives:
    press menu button -> setup -> system -> storage devices -> then press red button for initialize (be carefully all your data will be erased). last step is to mount the device.
    next step: press blue button -> newnigma2 services -> sytsem tools -> expert settings -> change opkg ignore USB/HDD from yes to no. Restart enigma2 und install picons on your usb device.

    2. network configuration:
    If the IP address assigned manually, as well as the address of the DNS server must be entered.
    press menu button -> setup -> system -> network -> adapter settings

    Wichtige Änderungen:

    1. Picons auf USB-Laufwerken/der internen Festplatte installieren:
    USB-Laufwerk über "Menü > Einstellungen > System > Speichergeräte" initialisieren und anschließend mounten"
    "blaue Taste > Newnigma Services > System Werkzeuge > Experten Einstellungen > Opkg ignoriere USB/HDD = nein > E2 Neustart und anschließend auf USB installieren"

    2. Netzwerk Konfiguration:
    "Menü > Einstellungen > System > Netzwerk > LAN oder WLAN > Adapter Einstellungen"
    Wird die IP-Adresse manuell konfiguriert so muss zwingend auch die Adresse des DNS-Servers eingetragen werden.

  5. #35

    korn's Avatar
    Join Date
    Dec 2010
    Location
    SatDreamGr
    Posts
    51,784
    Rep Power
    2484984

    Απ: DM800SE Clone Images Ο.Ε. 2.0 SIM 2 ssl84d


    newnigma2-stable-lean-dm800se-v4.0.6 -ramiMAHER#ssl84D

    new Secondstage 84D


    sim2


    enigma2 patched :2013/11/18: by ramiMAHER







    DM 800 HD se: Newnigma2 v4.0.6

    ################################################## ###################
    Newnigma2 team proudly presents:
    Newnigma2 v4.0.6
    ################################################## ###################

    Basics:

    Enigma2 4.0: 18.11.2013
    Enigma2 Plugins: 29.11.2013
    Newnigma2 Plugins: 29.11.2013


    DM 800 HD se

    driver: 01.10.2013
    secondstage: 84
    kernel 3.2.51


    DM 800 HD se v2

    driver: 01.10.2013
    secondstage: 88
    kernel 3.2.51


    Changes by DMM:

    migrated to Linux Kernel 3.2.49
    - better support for USB devices
    - support for more filesystems
    - support for HDDs bigger than 2TB
    added fully integrated Web browser and HBBTV support
    added support to burn and play "blu discs"
    added fully integrated teletext with background caching
    improved iptv streaming support (e.g. added support for streaming services in bouquets)
    added basic HDMI CEC support
    some EPG improvements
    - added new option to keep and collect outdated events (disabled by default) to show outdated events of a service you can press "long" info or press menu in single epg-list of a service
    - added new option to set the epgcache timespan
    - re-added support for external epg data sources
    improved DVB/Teletext subtitle support
    several improvements for prettier user interfaces (e.g. Channel list with more adjustment options)
    don't jump past end of file when doing relative jumps in recordings
    serious improvement in picture player speed
    improved overall stability / speed
    improved media playback support (e.g. added WMA/WMV support)
    improved storage/device manager
    added Brazilian Portuguese and Hebrew translations
    added UPNP Media Renderer demo plugin
    added DLNA Media Server
    added automatic power saving sleep timer (EU regulation)
    added some new community plugins
    update default services for 19.2E, 13.0E, 28.2E


    changelog E2 15.08.2013:

    fixed CEC poweroff message on enigma2 shutdown (deep standby)
    - dont send CEC poweron message on automatic timer wakeup
    - enigma2 will now boot into idle mode on automatic recordtimer wakeups
    added virtual subservices for some HD services
    fixed background and selection pixmap rendering in config lists
    fixed possible crash on subtitle delivery when 3rd party skins don't define some mandatory values
    added "HasSubtitles" converter option to ServiceInfo skin converter


    changelog E2 31.08.2013:

    added "HasSubtitles" converter option to ServiceInfo skin converter
    don't zap to last service after booting into idle mode (automatich timer wakeup)
    DVDBurn: fixed Bludisc and DVD audio track language selection
    changes for easier timer wakeup detection in plugins
    HdmiCec: dont send poweron command when a idle mode request is pending or idle mode is active
    added missing check to detect if the last automatic wakeup was a record timer wakeup
    let subservice numbers start from 1 .. because 0 is used to zap between previous two services
    fixed abortion/ending of service scan
    fixed zap to last subservice in list via button
    UPnPMediaRenderer: fixed log spam
    UPnPMediaRenderer: some picture display improvements (fixed TV-Picture showing between two pictures)
    fixed possible crash when skipping forwards/backwards with DVB subtitles enabled
    changes for cleaner shutdown
    fixed deadlock on jump forward/backward in MKV files
    added a ServiceInfo converter workaround for types based on evVideoSizeChanged


    changelog E2 02.09.2013:

    virtual subservices bugfix for cable
    added legacy virtual subservices mode which can be enabled in usage config in normal case not needed (just for some broken cable providers.. but try first the normal mode)
    added possibility to receive epg data via ts streaming (not used by our soft yet)


    changelog E2 07.09.2013:

    fixed crashes on e2 shutdown
    fixed crash on end of servicescan
    added a more easy way to detect recording timer wakeups
    speedup devicemanager
    fixed incorrectly set harddisc idle time on hdds detected by hotplug
    some stability improvements


    changelog E2 27.09.2013:

    added ac3+ support (requires hw drivers with ac3+ support not DM8000/DM800HD)
    improved storing config files on write-back enabled filesystems (ubifs, ext2, ext3 ....)
    fixed some upnp issues (special char/umlaut issues, servers not showing up, minor fixes)
    fixed subtitle synchronization (was broken on skip fwd/bwd since mkv deadlock fix)
    fixed BlinkingLabel (thanks to Kashmir)
    fixed crash on timer-based deepstandby wakeup
    fixed shutdown on radio services with RASS
    fixed software update on dm500hd / dm800se with external update tool
    (to get automatic updates again, an update via telnet/ssh shell is required once)


    changelog E2 01.10.2013:

    extend pid cache for audio types other than AC3 and MPEG
    (required to store last selected ac3+ or aac audio tracks)
    dont send CEC poweroff on idle to standby transition again
    dont send CEC poweron on idle to standby transition
    dont restart previous service on idle to standby transition
    fixed rare crashes on e2 shutdown
    call flush and fsync when storing parental control white/blacklist


    changelog E2 12.11.2013:

    added unicable support for jultec JPS0501-8
    added possibility to rename services/markers and bouquets via channelselection context menu
    small storage manager fixes
    changes to support picons for remote services (partnerbox)
    fixed possible epgcache crash
    fixed now event epg query when no next event is available
    fixed endless loop caused by wrongly encoded service names on 10E 11221V 27500


    changelog E2 18.11.2013:

    fixed greenscreen on cancel press during service/marker/bouquet rename
    fixed a possible crash caused by plugins which doesn't check the return code of startTimeQuery..
    fixed possible crash on screen close
    fixed broken "ImageDefaultInstaller" (broken since 20131112 update)
    fixed possible ConfigLocations crash (typo)



    Notice: Update from v4.0.x to 4.0.6 possible.

    Changes:

    Added: Skin Evolution-HD by Kerni (thx)
    Added: newnigma2.Kerni.PanTV-HD by Kerni (thx)
    Added: Kerni.Gnome-HD by Kerni (thx)
    Added: VideoDB V2.2 by Dr.Best (click here for more information) (thx)
    IMPORTANT: read here for your collections
    Added: mediaportal
    Added: swapmanager
    Added: wget
    Added: weathercomponent (needed for some skins)
    Bugfix: Rebuild Picon handling/loading/caching (less memory consumption)
    Bugfix: Newnigma2 Services fix getPNG cache failure (memoryleak)
    Bugfix: Improved onlineinstaller cache handling (sometimes strange screen output)
    Bugfix: neutrino keymap
    Update: Some improvements on our onlineinstaller
    Update: znc to version 1.2
    Update: openvpn to version 2.3.2
    Update: german translation
    Update: mediaportal to version 4.9.2
    Removed: we have removed non working plugins. most of them are integrated in mediaportal.
    Removed: keymanger plugin from image. It's still available from our feed.
    here u can find USB to UART driver
    here u can find DreamUP V1.3.3.11



    Info: since release of e2 v. 3.2 there is no dm7025 support yet. that's what dmm said.
    Multiboot: No support for multiboot. Not planned. No need for such a tool.
    GP3wizard: No support for gp3wizard. Probably not running. Not needed in Newnigma2 environment.

    Important changes:

    1. Install picons on USB-Drives:
    press menu button -> setup -> system -> storage devices -> then press red button for initialize (be carefully all your data will be erased). last step is to mount the device.
    next step: press blue button -> newnigma2 services -> sytsem tools -> expert settings -> change opkg ignore USB/HDD from yes to no. Restart enigma2 und install picons on your usb device.

    2. network configuration:
    If the IP address assigned manually, as well as the address of the DNS server must be entered.
    press menu button -> setup -> system -> network -> adapter settings



    Download

    newnigma2-stable-lean-dm800se-v4.0.6 -ramiMAHER#ssl84D




  6. #36

    korn's Avatar
    Join Date
    Dec 2010
    Location
    SatDreamGr
    Posts
    51,784
    Rep Power
    2484984

    Απ: DM800SE Clone Images Ο.Ε. 2.0 SIM 2 ssl84d

    Sim2-dreamelite-dm800se-20131128-riyad66-84D


    Enigma2 Version:-tarball- ramiMAHER ..thx
    RAED& MF yassinov
    Experimental Sim2 riyad66 20131128

    driver 2013-10-01






    https://www.mediafire.com/?cvrcawfp19bxlh6

  7. #37

    korn's Avatar
    Join Date
    Dec 2010
    Location
    SatDreamGr
    Posts
    51,784
    Rep Power
    2484984

    Απ: DM800SE Clone Images Ο.Ε. 2.0 SIM 2 ssl84d



    TSimage
    -dm800se-3.0-OE2.0-2013-12-02-ramiMAHER#ssl84D




    new Secondstage 84D


    sim2


    enigma2 patched :2013/11/18: by ramiMAHER


    PHP Code:
    enigma2-tspanel_2.3-r21 --> enigma2-tspanel_2.4-r1:
    add TSyWeatherPlugin
    Fix AddonsManager
    enigma2
    -skin-ts-metrixhd_1.0-r25 --> enigma2-skin-ts-metrixhd_1.0-r27:
    Fix crash on DVDBurn
    enigma2_3.999
    +20131112 --> enigma2_3.999+20131118
    enigma2
    -plugin_3.999+git4740 --> enigma2-plugin_3.999+git4748
    enigma2
    -plugin-extensions-openwebif_git534 --> enigma2-plugin-extensions-openwebif_git537
    enigma2
    -plugin-extensions-tsonlinetvmod_1.4 --> enigma2-plugin-extensions-tsonlinetvmod_1.5
    enigma2
    -plugin-extensions-teledunetupdater_1.0-r3 --> enigma2-plugin-extensions-teledunetupdater_1.0-r5 
    New TSyWeatherPlugin















    DOWNLOAD

    TSimage-dm800se-3.0-OE2.0-2013-12-02-ramiMAHER#ssl84D


  8. #38

    Re: DM800SE Clone Images Ο.Ε. 2.0 SIM 2 ssl84d

    Sim2-Merlin-3-OE-2-0-dm800se-20131201-riyad66-84D

    [CENTER]Sim2-Merlin-3-OE-2-0-dm800se-20131201-riyad66-84D

    new Secondstage 84D


    sim2


    Enigma2 Version:-tarball- ramiMAHER ..thx

    Experimental Sim2 riyad6620131201


    Auf dem Feed liegen Updates bereit.

    Merlin3:
    - simplified PiconLoader: removed virtual PiconSet for PiconMapper (using regular DVB-S PiconSets now). Please delete existing PiconMapperSet!
    - reduced offered directories to those matching the size of the Picon when installing a new PiconSet
    - simplified PiconMapper config: it's only required to activate the PiconMapper. Sets and directory no longer need to be selected

    Siehe auch: -> OE, Enigma2 und Enigma2-Plugins auf Schwerkraft








  9. #39

    Re: DM800SE Clone Images Ο.Ε. 2.0 SIM 2 ssl84d

    Sim2-TSimage-3-0-OE-2-0-dm800se-20131202-riyad66-84D

    new Secondstage 84D
    sim2
    Enigma2 Version:-tarball- ramiMAHER ..thx
    Experimental Sim2 riyad66-(20131202)


    This image has been resized. Click this bar to view the full image. The original image is sized 720x405.


    This image has been resized. Click this bar to view the full image. The original image is sized 720x405.


    This image has been resized. Click this bar to view the full image. The original image is sized 720x405.




    https://www.mediafire.com/?ewkb9es31y48uz4




    Thanks to riyad66

  10. #40

    korn's Avatar
    Join Date
    Dec 2010
    Location
    SatDreamGr
    Posts
    51,784
    Rep Power
    2484984

    Απ: DM800SE Clone Images Ο.Ε. 2.0 SIM 2 ssl84d

    TSimage3-OE2-dm800se-sim2 backup by s@m

    TSimage3-OE2-dm800se-sim2-2013-s@m
    backup of
    TSimage-dm800se-3.0-OE2.0-2013-12-02-ramiMAHER#ssl84D
    enigma2 patched :2013/11/18: by ramiMAHER


    INFO



    SAME BOOTLOGO but NEW SPINNER




    SOFTCAM INSTALLED
    CCCAM230 & MGCAMD1.38c

    (usr var/keys dir created , mgcamd config downloaded & set to work ok)
    mgclient set to G: { 33 } in case u will use newcamd client with mgcamd please change to G: { 01 }









    PLUGINS INSTALLED
    NO TSPANEL (no need in TSimage )TSimage has it own blue panel addons downloads & select any action u need from icon panel
    TSMEDIA 4.7 beta3
    MYTUBE PLAYER OE2.0
    CCCam info v1.3c
    CrossEPG Downloader already installed v296
    FLASH EXPANDER











    2 SKIN installed

    1st{ SKIN ts vinity }







    2nd( SKIN ts mega2 )













    notice: tested & working 100% on internal flash , FREE space is almost 2.5 MB , use flash expander to extend ur storage memorey with installing a usb (media/usb) format (initialize) & mount it
    then u can enjoy a huge free internal flash memorey space



    DOWNLOAD LINK

    Code:
    http://www.mediafire.com/download/b9pnk5m2b1941q7

Page 4 of 38 FirstFirst 12345678 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

Similar Threads

  1. DM800SE Clone Images Ο.Ε. 2.0 Sunray SR4 ssl84d
    By korn in forum Images DM800SE
    Replies: 24
    Last Post: 05-05-21, 07:52
  2. DM800 Clone Images Ο.Ε. 2.0 SIM 2 ssl84d
    By korn in forum Images Dm800
    Replies: 484
    Last Post: 09-10-19, 17:54
  3. DM500HD Clone Images Ο.Ε. 2.0 SIM 2 ssl84d
    By korn in forum Images Dm500 HD
    Replies: 119
    Last Post: 07-06-18, 02:09
  4. DM800se clone images sim 2.10 ssl84d
    By kobos in forum Images DM800SE
    Replies: 6
    Last Post: 25-03-14, 18:27

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •