Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 22

Thread: Newnigma2 OE 2.0 DM8000

  1. #11

    korn's Avatar
    Join Date
    Dec 2010
    Location
    SatDreamGr
    Posts
    51,784
    Rep Power
    2484984

    Απ: Newnigma2 OE 2.0 DM8000

    Newnigma2 v4.0.10
    #####################################################################
    Newnigma2 team proudly presents:

    Newnigma2 v4.0.10
    #####################################################################

    Basics:

    • Enigma2 4.0: 14.03.2014
    • Enigma2 Plugins: 01.05.2014
    • Newnigma2 Plugins: 01.05.2014



    DM 8000 HD PVR

    • driver: 14.03.2013
    • secondstage: 84
    • kernel: 3.2.56


    changelog E2 14.03.2014:

    • updated translations
    • added some audio/video type extensions


    changelog E2 19.02.2014:

    • finally fixed baltic teletext subtitles
    • added usage config entry to switch back to old teletext subtitle charset selection
    • some small changes to improve list displaying with hd skins (thanks to zombi)


    changelog E2 14.02.2014:

    • small mediaplayer position query fix
    • fixed memory leak on ts streaming from network sources
    • dont lookup other transponder SDT during service scan by default, add a (expert) config option to reenable it
    • (imho its needed for dish network scan only... but breaks service descriptions on some other satellites)
    • fixed possible crash on enigma2 shutdown/restart
    • teletext subtitles changes by Arvo Järve (thanks for that!)
    • add fallback handling to detect subtitle language for providers which not correctly implement the national option subset in the page header
    • (fixes subtiles on some baltic countries)
    • added cyrillic charsets
    • (e.g. fixes teletext subtitles on russian services)
    • new skin option: progress_pointer



    Notice: Update from v4.0.x to 4.0.10 only possible by updating via console.

    Changes:

    • Added: Skin Evolution-HD by Kerni (thx)
    • Added: newnigma2.Kerni.PanTV-HD by Kerni (thx)
    • Added: Kerni.Gnome-HD by Kerni (thx)
    • Added: VideoDB V2.2 by Dr.Best (click here for more information) (thx)
    • Added: mediaportal
    • Added: swapmanager
    • Added: wget
    • Added: stat
    • Added: weathercomponent (needed for some skins)
    • Added: eventposition (needed for some skins)
    • Added: reftopiconname (needed for some skins)
    • Added: ledmanager (be carefully changed source="ButtonGreentext" to source="key_green") screen for skinner
    • Added: Black-Box.HD.ME (32bit skin)
    • Added: cryptsetup more information
    • Added: newnigma2-servicerestart: restart services via gui, like init.d, if telnet is not reachable screen for skinner
    • Added: free space check's before installing or upgrade packages
    • Added: min free flash space is 3mb for installing/upgrading some packages
    • Added: improve network connectivity check in newnigma2 installer
    • Added: new skin option: progress_pointer (since E2 14.02.2014 possible) screen for skinner
    • Added:readded extendedinfobar
    • Bugfix: Rebuild Picon handling/loading/caching (less memory consumption)
    • Bugfix: Newnigma2 Services fix getPNG cache failure (memoryleak)
    • Bugfix: Improved onlineinstaller cache handling (sometimes strange screen output)
    • Bugfix: neutrino keymap
    • Bugfix: newnigma2.Kerni.PanTV-HD icons
    • Bugfix: Caid Renderer didn't close ecm.info and share.info properly
    • Bugfix: for loading wrong or no newnigma2 service menu png's
    • Bugfix: loosing picon value in servicelist after using configsaver
    • Bugfix: for not shown all skins in nenwigma2 installer skin section, like tikila skins
    • Bugfix: prevent of loading skin_infobar_wetter.xml on other skins then "newnigma2-" skins
    • Bugfix: broken gui installer
    • Update: Some improvements on our onlineinstaller
    • Update: znc to version 1.2
    • Update: openvpn to version 2.3.2
    • Update: german translation
    • Update: mediaportal to version 5.2.1
    • Update: added weatherfunction only for newnigma2-HD inforbar
    • (blue button -> newnigma2 services -> osd function -> weather infobar -> on)
    • Update: picon renderer. create piconSList dir for servicelist picons.
    • Removed: we have removed non working plugins. most of them are integrated in mediaportal.
    • Removed: keymanger plugin from image. It's still available from our feed.





    Info: since release of e2 v. 3.2 there is no dm7025 support yet. that's what dmm said.
    Multiboot: No support for multiboot. Not planned. No need for such a tool.
    GP3wizard: No support for gp3wizard. Probably not running. Not needed in Newnigma2 environment.

    Important changes:

    1. Install picons on USB-Drives:
    press menu button -> setup -> system -> storage devices -> then press red button for initialize (be carefully all your data will be erased). last step is to mount the device.
    next step: press blue button -> newnigma2 services -> sytsem tools -> expert settings -> change opkg ignore USB/HDD from yes to no. Restart enigma2 und install picons on your usb device.

    2. network configuration:
    If the IP address assigned manually, as well as the address of the DNS server must be entered.
    press menu button -> setup -> system -> network -> adapter settings

    3. install or upgrading:
    before installing/upgrading packages, we now check if at least are 3mb free space in flash.
    ipk's/packages from the newnigma2 team has a value which says the installer the minimum needed space for
    the package. if the min required space is not available than the installation aborts.
    !! Attention enigma2 ipk needs at least 9mb !!

    4. issue due upgrade to v4.0.10:
    if you have troubles by upgrading to v4.0.10 even no 9mb free space for the enigma2 package, so
    you can first upgrade the newnigma2 installer package. After reboot try to upgrade again via gui, the installer
    ignore's now the 9mb needed from the package and uses instead the value you set in
    "blue button -> newnigma2 services -> system tools -> expert settings -> min. free space".

    Wichtige Änderungen:

    1. Picons auf USB-Laufwerken/der internen Festplatte installieren:
    USB-Laufwerk über "Menü > Einstellungen > System > Speichergeräte" initialisieren und anschließend mounten"
    "blaue Taste > Newnigma Services > System Werkzeuge > Experten Einstellungen > Opkg ignoriere USB/HDD = nein > E2 Neustart und anschließend auf USB installieren"

    2. Netzwerk Konfiguration:
    "Menü > Einstellungen > System > Netzwerk > LAN oder WLAN > Adapter Einstellungen"
    Wird die IP-Adresse manuell konfiguriert so muss zwingend auch die Adresse des DNS-Servers eingetragen werden.

    3. Installation oder Update des System:
    Es müssen nun mindestens 3 MB freier Flashspeicher zur Verfügung stehen um Installationen/Updates vorzunehmen.
    Vor Installation eines ipk's vom newnigma2 team, wird geprüft, ob für dieses Paket noch genügend freier Speicher vorhanden ist.
    Sollte das nicht der Fall sein, bricht die Installation ab.
    !!Achtung das enigma2 Paket benötigt min 9MB!!

    4. Bei Problemen mit dem Update auf v4.0.10:
    Sollte das Update auf v4.0.10 nicht funktionieren, weil dem enigma2 Paket keine 9MB zur Verfügung stehen, so ist zuerst der newnigma2 installer zu aktualisieren.
    Nach anschließendem reboot kann man den Upgradevorgang via gui fortsetzen. Dabei wird der Check des freien Speichers beim Upgrade auf den Wert gesetzt, der unter
    "blaue Taste -> Newnigma Services -> System Werkzeuge -> Experten Einstellungen -> min. free space" eingestellt ist.

    Your
    Newnigma2 Team


    newnigma2_stable_dm8000_v4.0.10.zip

  2. #12

    korn's Avatar
    Join Date
    Dec 2010
    Location
    SatDreamGr
    Posts
    51,784
    Rep Power
    2484984

    Απ: Newnigma2 OE 2.0 DM8000

    #####################################################################
    Newnigma2 team proudly presents:
    Newnigma2 v4.0.11

    #####################################################################

    Basics:
    • Enigma2 4.0: 24.06.2014
    • Enigma2 Plugins: 11.07.2014
    • Newnigma2 Plugins: 11.07.2014


    DM 8000 HD PVR
    • driver: 04.06.2014
    • secondstage: 84
    • kernel: 3.2.59



    changelog E2 24.06.2014:
    • Use the setting "Automatic wakeup from standby for zap timer" for idle mode, too
    • Hbbtv: fixed playback of zdf video streams
    • Fixed possible crashes on enigma2 start
    • Reworked .cuts file handling to work properly on network storage
      (and fixed possible crashes during recordings)


    changelog E2 16.06.2014:
    • correctly apply AC3/PCM delay on mediafile play (MKV, MP4....)
    • small datetime converter fix
    • HdmiCec:
      - broadcast system standby instead of sending it only to the tv (fixes AVR's not turning off)
      - impelment basic volume punchthrough
      - add hack for not working CEC poweroff on strange TVs not provides a EDID when powered off
      - fixed possible lost cec commands on enigma2 shutdown
    • fixed possible crash on harddisk re-init, allow fsck for ext4 (thx to jophi)
    • re-read .cuts file during playback when needed (e.g. record stopped)
      dont overwrite .cuts file on record stop... just append event markers
      see more information
    • added US_ULTRA and US_JUMBO band to cablescan
    • add needed changes for current DVB-C tuner transponder search tools
    • fixed crash (TYPO) on mute press (delete) on end of textfield


    changelog E2 14.03.2014:
    • updated translations
    • added some audio/video type extensions



    Notice: Update from v4.0.x to 4.0.11 only possible by updating via console.

    Changes:
    • Added: Skin Evolution-HD by Kerni (thx)
    • Added: newnigma2.Kerni.PanTV-HD by Kerni (thx)
    • Added: Kerni.Gnome-HD by Kerni (thx)
    • Added: VideoDB V2.2 by Dr.Best (click here for more information) (thx)
    • Added: mediaportal
    • Added: swapmanager
    • Added: wget
    • Added: stat
    • Added: weathercomponent (needed for some skins)
    • Added: eventposition (needed for some skins)
    • Added: reftopiconname (needed for some skins)
    • Added: ledmanager (be carefully changed source="ButtonGreentext" to source="key_green") screen for skinner
    • Added: Black-Box.HD.ME (32bit skin)
    • Added: cryptsetup more information
    • Added: newnigma2-servicerestart: restart services via gui, like init.d, if telnet is not reachable screen for skinner
    • Added: free space check's before installing or upgrade packages
    • Added: min free flash space is 3mb for installing/upgrading some packages
    • Added: improve network connectivity check in newnigma2 installer
    • Added: new skin option: progress_pointer (since E2 14.02.2014 possible) screen for skinner
    • Added: readded extendedinfobar
    • Bugfix: Rebuild Picon handling/loading/caching (less memory consumption)
    • Bugfix: Newnigma2 Services fix getPNG cache failure (memoryleak)
    • Bugfix: Improved onlineinstaller cache handling (sometimes strange screen output)
    • Bugfix: neutrino keymap
    • Bugfix: newnigma2.Kerni.PanTV-HD icons
    • Bugfix: Caid Renderer didn't close ecm.info and share.info properly
    • Bugfix: for loading wrong or no newnigma2 service menu png's
    • Bugfix: loosing picon value in servicelist after using configsaver
    • Bugfix: for not shown all skins in nenwigma2 installer skin section, like tikila skins
    • Bugfix: prevent of loading skin_infobar_wetter.xml on other skins then "newnigma2-" skins
    • Bugfix: broken gui installer
    • Update: Some improvements on our onlineinstaller
    • Update: znc to version 1.4
    • Update: openvpn to version 2.3.4
    • Update: german translation
    • Update: mediaportal to version 5.3.2
    • Update: added weatherfunction only for newnigma2-HD inforbar
      (blue button -> newnigma2 services -> osd function -> weather infobar -> on)
    • Update: picon renderer. create piconSList dir for servicelist picons.
    • Update: IPTV-List-Updater
    • Removed: we have removed non working plugins. most of them are integrated in mediaportal.
    • Removed: keymanger plugin from image. It's still available from our feed.
    • here u can find USB to UART driver
    • here u can find DreamUP V1.3.3.11



    Info: since release of e2 v. 3.2 there is no dm7025 support yet. that's what dmm said.
    Multiboot: No support for multiboot. Not planned. No need for such a tool.
    GP3wizard: No support for gp3wizard. Probably not running. Not needed in Newnigma2 environment.

    Important changes:

    1. Install picons on USB-Drives:
    press menu button -> setup -> system -> storage devices -> then press red button for initialize (be carefully all your data will be erased). last step is to mount the device.
    next step: press blue button -> newnigma2 services -> sytsem tools -> expert settings -> change opkg ignore USB/HDD from yes to no. Restart enigma2 und install picons on your usb device.

    2. network configuration:
    If the IP address assigned manually, as well as the address of the DNS server must be entered.
    press menu button -> setup -> system -> network -> adapter settings

    3. install or upgrading:
    before installing/upgrading packages, we now check if at least are 3mb free space in flash.
    ipk's/packages from the newnigma2 team has a value which says the installer the minimum needed space for
    the package. if the min required space is not available than the installation aborts.
    !! Attention enigma2 ipk needs at least 9mb !!

    4. issue due upgrade to v4.0.11:
    if you have troubles by upgrading to v4.0.11 even no 9mb free space for the enigma2 package, so
    you can first upgrade the newnigma2 installer package. After reboot try to upgrade again via gui, the installer
    ignore's now the 9mb needed from the package and uses instead the value you set in
    "blue button -> newnigma2 services -> system tools -> expert settings -> min. free space".

    Wichtige Änderungen:

    1. Picons auf USB-Laufwerken/der internen Festplatte installieren:
    USB-Laufwerk über "Menü > Einstellungen > System > Speichergeräte" initialisieren und anschließend mounten"
    "blaue Taste > Newnigma Services > System Werkzeuge > Experten Einstellungen > Opkg ignoriere USB/HDD = nein > E2 Neustart und anschließend auf USB installieren"

    2. Netzwerk Konfiguration:
    "Menü > Einstellungen > System > Netzwerk > LAN oder WLAN > Adapter Einstellungen"
    Wird die IP-Adresse manuell konfiguriert so muss zwingend auch die Adresse des DNS-Servers eingetragen werden.

    3. Installation oder Update des System:
    Es müssen nun mindestens 3 MB freier Flashspeicher zur Verfügung stehen um Installationen/Updates vorzunehmen.
    Vor Installation eines ipk's vom newnigma2 team, wird geprüft, ob für dieses Paket noch genügend freier Speicher vorhanden ist.
    Sollte das nicht der Fall sein, bricht die Installation ab.
    !!Achtung das enigma2 Paket benötigt min 9MB!!

    4. Bei Problemen mit dem Update auf v4.0.11:
    Sollte das Update auf v4.0.11 nicht funktionieren, weil dem enigma2 Paket keine 9MB zur Verfügung stehen, so ist zuerst der newnigma2 installer zu aktualisieren.
    Nach anschließendem reboot kann man den Upgradevorgang via gui fortsetzen. Dabei wird der Check des freien Speichers beim Upgrade auf den Wert gesetzt, der unter
    "blaue Taste -> Newnigma Services -> System Werkzeuge -> Experten Einstellungen -> min. free space" eingestellt ist.

    Your
    Newnigma2 Team


    Download

  3. #13

    korn's Avatar
    Join Date
    Dec 2010
    Location
    SatDreamGr
    Posts
    51,784
    Rep Power
    2484984

    Απ: Newnigma2 OE 2.0 DM8000

    Newnigma2 team proudly presents: v4.0.12

    #####################################################################
    Newnigma2 team proudly presents:
    Newnigma2 v4.0.12

    #####################################################################

    Basics:
    • Enigma2 4.0: 05.01.2015
    • Enigma2 Plugins: 06.01.2015
    • Newnigma2 Plugins: 06.01.2015


    DM 500 HD
    • driver: 16.06.2014
    • secondstage: 84
    • kernel: 3.2.59


    DM 500 HD v2
    • driver: 16.06.2014
    • secondstage: 88
    • kernel: 3.2.59


    DM 800 HD PVR
    • driver: 28.12.2013
    • secondstage: 84
    • kernel: 2.6.18


    DM 800 HD se
    • driver: 16.06.2014
    • secondstage: 84
    • kernel 3.2.59


    DM 800 HD se v2
    • driver: 16.06.2014
    • secondstage: 88
    • kernel 3.2.59


    DM 7020 HD
    • driver: 16.06.2014
    • secondstage: 88
    • kernel 3.2.59


    DM 8000 HD PVR
    • driver: 04.06.2014
    • secondstage: 84
    • kernel: 3.2.59



    changelog E2 05.01.2015:
    • auto-fallback for some shoutcast mp3 webradio servers which are unhappy with HBBTV_USER_AGENT string
      (fixes GStreamer plugin text/html decoder not avaliable!)
    • ignore SDT caids when the service already have caids assigned (fixes a CI support bug)
    • only add 0x0000 caid as "scrambled by sdt indicator" when no other caid exists on this transponder
    • fixed another possible deadlock on skip forward/backward on mediafiles
    • fixed crash on change servicelist style after use another ServiceList instance...
    • fixed blindscan constellation display



    Notice: Update from v4.0.x to 4.0.12 only possible by updating via console.

    Changes:
    • Added: Skin Evolution-HD by Kerni (thx)
    • Added: newnigma2.Kerni.PanTV-HD by Kerni (thx)
    • Added: Kerni.Gnome-HD by Kerni (thx)
    • Added: VideoDB V2.2 by Dr.Best (click here for more information) (thx)
    • Added: mediaportal
    • Added: swapmanager
    • Added: wget
    • Added: stat
    • Added: weathercomponent (needed for some skins)
    • Added: eventposition (needed for some skins)
    • Added: reftopiconname (needed for some skins)
    • Added: ledmanager (be carefully changed source="ButtonGreentext" to source="key_green") screen for skinner
    • Added: Black-Box.HD.ME (32bit skin)
    • Added: cryptsetup more information
    • Added: newnigma2-servicerestart: restart services via gui, like init.d, if telnet is not reachable screen for skinner
    • Added: free space check's before installing or upgrade packages
    • Added: min free flash space is 3mb for installing/upgrading some packages
    • Added: improve network connectivity check in newnigma2 installer
    • Added: new skin option: progress_pointer (since E2 14.02.2014 possible) screen for skinner
    • Added: readded extendedinfobar
    • Bugfix: Rebuild Picon handling/loading/caching (less memory consumption)
    • Bugfix: Newnigma2 Services fix getPNG cache failure (memoryleak)
    • Bugfix: Improved onlineinstaller cache handling (sometimes strange screen output)
    • Bugfix: neutrino keymap
    • Bugfix: newnigma2.Kerni.PanTV-HD icons
    • Bugfix: Caid Renderer didn't close ecm.info and share.info properly
    • Bugfix: for loading wrong or no newnigma2 service menu png's
    • Bugfix: loosing picon value in servicelist after using configsaver
    • Bugfix: for not shown all skins in nenwigma2 installer skin section, like tikila skins
    • Bugfix: prevent of loading skin_infobar_wetter.xml on other skins then "newnigma2-" skins
    • Bugfix: broken gui installer
    • Update: Some improvements on our onlineinstaller
    • Update: znc to version 1.4
    • Update: openvpn to version 2.3.4
    • Update: german translation
    • Update: picon renderer. create piconSList dir for servicelist picons.
    • Update: IPTV-List-Updater
    • Update: cryptsetup
    • Update: openssl
    • Removed: we have removed non working plugins. most of them are integrated in mediaportal.
    • Removed: keymanger plugin from image. It's still available from our feed.
    • here u can find USB to UART driver
    • here u can find DreamUP V1.3.3.11



    Info: since release of e2 v. 3.2 there is no dm7025 support yet. that's what dmm said.
    Multiboot: No support for multiboot. Not planned. No need for such a tool.
    GP3wizard: No support for gp3wizard. Probably not running. Not needed in Newnigma2 environment.

    Important changes:

    1. Install picons on USB-Drives:
    press menu button -> setup -> system -> storage devices -> then press red button for initialize (be carefully all your data will be erased). last step is to mount the device.
    next step: press blue button -> newnigma2 services -> sytsem tools -> expert settings -> change opkg ignore USB/HDD from yes to no. Restart enigma2 und install picons on your usb device.

    2. network configuration:
    If the IP address assigned manually, as well as the address of the DNS server must be entered.
    press menu button -> setup -> system -> network -> adapter settings

    3. install or upgrading:
    before installing/upgrading packages, we now check if at least are 3mb free space in flash.
    ipk's/packages from the newnigma2 team has a value which says the installer the minimum needed space for
    the package. if the min required space is not available than the installation aborts.
    !! Attention enigma2 ipk needs at least 9mb !!

    4. issue due upgrade to v4.0.12:
    if you have troubles by upgrading to v4.0.12 even no 9mb free space for the enigma2 package, so
    you can first upgrade the newnigma2 installer package. After reboot try to upgrade again via gui, the installer
    ignore's now the 9mb needed from the package and uses instead the value you set in
    "blue button -> newnigma2 services -> system tools -> expert settings -> min. free space".

    Wichtige Änderungen:

    1. Picons auf USB-Laufwerken/der internen Festplatte installieren:
    USB-Laufwerk über "Menü > Einstellungen > System > Speichergeräte" initialisieren und anschließend mounten"
    "blaue Taste > Newnigma Services > System Werkzeuge > Experten Einstellungen > Opkg ignoriere USB/HDD = nein > E2 Neustart und anschließend auf USB installieren"

    2. Netzwerk Konfiguration:
    "Menü > Einstellungen > System > Netzwerk > LAN oder WLAN > Adapter Einstellungen"
    Wird die IP-Adresse manuell konfiguriert so muss zwingend auch die Adresse des DNS-Servers eingetragen werden.

    3. Installation oder Update des System:
    Es müssen nun mindestens 3 MB freier Flashspeicher zur Verfügung stehen um Installationen/Updates vorzunehmen.
    Vor Installation eines ipk's vom newnigma2 team, wird geprüft, ob für dieses Paket noch genügend freier Speicher vorhanden ist.
    Sollte das nicht der Fall sein, bricht die Installation ab.
    !!Achtung das enigma2 Paket benötigt min 9MB!!

    4. Bei Problemen mit dem Update auf v4.0.12:
    Sollte das Update auf v4.0.12 nicht funktionieren, weil dem enigma2 Paket keine 9MB zur Verfügung stehen, so ist zuerst der newnigma2 installer zu aktualisieren.
    Nach anschließendem reboot kann man den Upgradevorgang via gui fortsetzen. Dabei wird der Check des freien Speichers beim Upgrade auf den Wert gesetzt, der unter
    "blaue Taste -> Newnigma Services -> System Werkzeuge -> Experten Einstellungen -> min. free space" eingestellt ist.

    Your
    Newnigma2 Team


    Threads:

    Image:


  4. #14

    korn's Avatar
    Join Date
    Dec 2010
    Location
    SatDreamGr
    Posts
    51,784
    Rep Power
    2484984

    Απ: Newnigma2 OE 2.0 DM8000

    Newnigma2 team proudly presents:
    Newnigma2 v4.0.16

    #####################################################################

    Basics:
    • Enigma2 4.0: 30.12.2015
    • Enigma2 Plugins: 02.01.2016
    • Newnigma2 Plugins: 02.01.2016


    DM 8000 HD PVR
    • driver: 04.06.2014
    • secondstage: 84
    • kernel: 3.2.68



    changelog E2 30.12.2015:
    • dvbnamespace is now always 0xFFFF0000 for DVB-C and 0xEEEE0000 for DVB-T (compatible with OE2.2)
    • fixed possible crashes / endless loops on title change in mediaplayer (introduced in 20151202 tarball)
    • fixed possible crashes on try to play unaccessible mediafiles
    • fixed possible deadlock caused by media subtitles
    • fixed audio/subtitle selection on movie playback with players opened via mainmenu
    • better compatibility with external plugins which patches the ChannelSelection
    • fixed crash on non driver based cable transponder search



    changelog E2 02.12.2015:
    • fixed H264 video detection of some TV services (sometimes AC3 descriptors are sent on the videopid?!?.... ignore this for now)
    • CommonInterfaceAssignment: dont crash when no accessible CI is available
    • allow to override broken transponders (same TSID/ONID combinations) via /etc/enigma2/scan_tp_valid_check.py again
    • DVDPlayer
      - reset the in_menu state on service stop (fixes buttons not working on next service start .. probably after choosing another iso file or dvd folder via filebrowser)
      - small fixes (from go4dream)
    • unicable.xml: add Spaun SUS5581/33NF models (thx to Uenz)
    • PicturePlayer: allow to disable the pictureplayer border to allow unscaled pictures up to skin resolution
      useful for displaying test images to optimize sharpness, contrast, brightness settings)
    • set http timeout for servicemp3 streaming to 30 seconds
    • delay playService requests until the ChannelSelection is fully initialized
    • fixed hbbtv video download
    • added si2166b blindscan support
    • added use SCPC search range option for si2166b tuner
    • show correct nim slot descriptions in infobar and serviceinfo dialog (A1/A2/B1/B2) skin must support this!!
    • optimized speed of servicescan without NIT a bit
    • small dvdplayer fixes (from go4dream)




    Notice: Update from v4.0.x to 4.0.16 only possible by updating via console.

    Changes:
    • Added: Newnigma2 FileBrowser
    • Added: Skin Evolution-HD by Kerni (thx)
    • Added: newnigma2.Kerni.PanTV-HD by Kerni (thx)
    • Added: Kerni.Gnome-HD by Kerni (thx)
    • Added: VideoDB V2.2 by Dr.Best (click here for more information) (thx)
    • Added: swapmanager
    • Added: wget
    • Added: stat
    • Added: weathercomponent (needed for some skins)
    • Added: eventposition (needed for some skins)
    • Added: reftopiconname (needed for some skins)
    • Added: ledmanager (be carefully changed source="ButtonGreentext" to source="key_green") screen for skinner
    • Added: Black-Box.HD.ME (32bit skin)
    • Added: cryptsetup more information
    • Added: newnigma2-servicerestart: restart services via gui, like init.d, if telnet is not reachable screen for skinner
    • Added: free space check's before installing or upgrade packages
    • Added: min free flash space is 3mb for installing/upgrading some packages
    • Added: improve network connectivity check in newnigma2 installer
    • Added: new skin option: progress_pointer (since E2 14.02.2014 possible) screen for skinner
    • Added: readded extendedinfobar
    • Bugfix: Rebuild Picon handling/loading/caching (less memory consumption)
    • Bugfix: Newnigma2 Services fix getPNG cache failure (memoryleak)
    • Bugfix: Improved onlineinstaller cache handling (sometimes strange screen output)
    • Bugfix: neutrino keymap
    • Bugfix: newnigma2.Kerni.PanTV-HD icons
    • Bugfix: Caid Renderer didn't close ecm.info and share.info properly
    • Bugfix: for loading wrong or no newnigma2 service menu png's
    • Bugfix: loosing picon value in servicelist after using configsaver
    • Bugfix: for not shown all skins in nenwigma2 installer skin section, like tikila skins
    • Bugfix: prevent of loading skin_infobar_wetter.xml on other skins then "newnigma2-" skins
    • Bugfix: broken gui installer
    • Update: Some improvements on our onlineinstaller
    • Update: znc to version 1.4
    • Update: openvpn to version 2.3.4
    • Update: german translation
    • Update: picon renderer. create piconSList dir for servicelist picons.
    • Update: IPTV-List-Updater
    • Update: cryptsetup
    • Update: openssl
    • Removed: we have removed non working plugins. most of them are integrated in mediaportal.
    • Removed: keymanger plugin from image. It's still available from our feed.
    • here u can find USB to UART driver
    • here u can find DreamUP V1.3.3.11



    Info: since release of e2 v. 3.2 there is no dm7025 support yet. that's what dmm said.
    Multiboot: No support for multiboot. Not planned. No need for such a tool.
    GP3wizard: No support for gp3wizard. Probably not running. Not needed in Newnigma2 environment.

    Important changes:

    1. Install picons on USB-Drives:
    press menu button -> setup -> system -> storage devices -> then press red button for initialize (be carefully all your data will be erased). last step is to mount the device.
    next step: press blue button -> newnigma2 services -> sytsem tools -> expert settings -> change opkg ignore USB/HDD from yes to no. Restart enigma2 und install picons on your usb device.

    2. network configuration:
    If the IP address assigned manually, as well as the address of the DNS server must be entered.
    press menu button -> setup -> system -> network -> adapter settings

    3. install or upgrading:
    before installing/upgrading packages, we now check if at least are 3mb free space in flash.
    ipk's/packages from the newnigma2 team has a value which says the installer the minimum needed space for
    the package. if the min required space is not available than the installation aborts.
    !! Attention enigma2 ipk needs at least 9mb !!

    4. issue due upgrade to v4.0.16:
    if you have troubles by upgrading to v4.0.16 even no 9mb free space for the enigma2 package, so
    you can first upgrade the newnigma2 installer package. After reboot try to upgrade again via gui, the installer
    ignore's now the 9mb needed from the package and uses instead the value you set in
    "blue button -> newnigma2 services -> system tools -> expert settings -> min. free space".

    Wichtige Änderungen:

    1. Picons auf USB-Laufwerken/der internen Festplatte installieren:
    USB-Laufwerk über "Menü > Einstellungen > System > Speichergeräte" initialisieren und anschließend mounten"
    "blaue Taste > Newnigma Services > System Werkzeuge > Experten Einstellungen > Opkg ignoriere USB/HDD = nein > E2 Neustart und anschließend auf USB installieren"

    2. Netzwerk Konfiguration:
    "Menü > Einstellungen > System > Netzwerk > LAN oder WLAN > Adapter Einstellungen"
    Wird die IP-Adresse manuell konfiguriert so muss zwingend auch die Adresse des DNS-Servers eingetragen werden.

    3. Installation oder Update des System:
    Es müssen nun mindestens 3 MB freier Flashspeicher zur Verfügung stehen um Installationen/Updates vorzunehmen.
    Vor Installation eines ipk's vom newnigma2 team, wird geprüft, ob für dieses Paket noch genügend freier Speicher vorhanden ist.
    Sollte das nicht der Fall sein, bricht die Installation ab.
    !!Achtung das enigma2 Paket benötigt min 9MB!!

    4. Bei Problemen mit dem Update auf v4.0.16:
    Sollte das Update auf v4.0.16 nicht funktionieren, weil dem enigma2 Paket keine 9MB zur Verfügung stehen, so ist zuerst der newnigma2 installer zu aktualisieren.
    Nach anschließendem reboot kann man den Upgradevorgang via gui fortsetzen. Dabei wird der Check des freien Speichers beim Upgrade auf den Wert gesetzt, der unter
    "blaue Taste -> Newnigma Services -> System Werkzeuge -> Experten Einstellungen -> min. free space" eingestellt ist.

    Your
    Newnigma2 Team



    Image:


  5. #15

    korn's Avatar
    Join Date
    Dec 2010
    Location
    SatDreamGr
    Posts
    51,784
    Rep Power
    2484984

    Απ: Newnigma2 OE 2.0 DM8000

    DM 8000 HD PVR: Newnigma2 v4.0.18

    #####################################################################
    Newnigma2 team proudly presents:
    Newnigma2 v4.0.18

    #####################################################################


    Basics:

    • Enigma2 4.0: 16.06.2016
    • Enigma2 Plugins: 18.06.2016
    • Newnigma2 Plugins: 18.06.2016




    DM 8000 HD PVR

    • driver: 04.06.2014
    • secondstage: 84
    • kernel: 3.2.68




    changelog E2 16.06.2016:

    • fixed possible crash when seeking forward/backward in media files without subtitles (or internet streams)
    • changed size of config entry progressbars
    • fixed internal log support




    changelog E2 12.06.2016:

    • allow to change text subtitle blackbox transparency for teletext subtitles
    • fixed possible timer sanity check false positives
    • fixed possible crash in CommonInterfaceAssignment plugin
    • manual service scan:
    • always use QPSK Modulation when DVB-S is selection in manual scan
    • moved satellites selection to first position
    • extend blindscan search ranges by +/- 50Mhz for silabs tuner.. its needed because of the internal algo..
    • added workaround for a driver bug in silabs driver blindscan
    • moved modulation before fec
    • fixed blindscan for C-Band
    • faster service scan (shorter SDT timeout)
    • misc/dev stuff
    • enable twisted threads support
    • backported Tools/Log functions from DreamOS
    • allow arbitrary user-agent for HTTPProgressDownloader
    • fixed return value of getInfoObject function for non ts media files










    Multiboot: No support for multiboot. Not planned. No need for such a tool.
    GP3wizard: No support for gp3wizard. Probably not running. Not needed in Newnigma2 environment.

    Important changes:

    1. Install picons on USB-Drives:
    press menu button -> setup -> system -> storage devices -> then press red button for initialize (be carefully all your data will be erased). last step is to mount the device.
    next step: press blue button -> newnigma2 services -> sytsem tools -> expert settings -> change opkg ignore USB/HDD from yes to no. Restart enigma2 und install picons on your usb device.

    2. network configuration:
    If the IP address assigned manually, as well as the address of the DNS server must be entered.
    press menu button -> setup -> system -> network -> adapter settings

    3. install or upgrading:
    before installing/upgrading packages, we now check if at least are 3mb free space in flash.
    ipk's/packages from the newnigma2 team has a value which says the installer the minimum needed space for
    the package. if the min required space is not available than the installation aborts.
    !! Attention enigma2 ipk needs at least 9mb !!

    4. issue due upgrade to v4.0.18:
    if you have troubles by upgrading to v4.0.18 even no 9mb free space for the enigma2 package, so
    you can first upgrade the newnigma2 installer package. After reboot try to upgrade again via gui, the installer
    ignore's now the 9mb needed from the package and uses instead the value you set in
    "blue button -> newnigma2 services -> system tools -> expert settings -> min. free space".

    Wichtige Änderungen:

    1. Picons auf USB-Laufwerken/der internen Festplatte installieren:
    USB-Laufwerk über "Menü > Einstellungen > System > Speichergeräte" initialisieren und anschließend mounten"
    "blaue Taste > Newnigma Services > System Werkzeuge > Experten Einstellungen > Opkg ignoriere USB/HDD = nein > E2 Neustart und anschließend auf USB installieren"

    2. Netzwerk Konfiguration:
    "Menü > Einstellungen > System > Netzwerk > LAN oder WLAN > Adapter Einstellungen"
    Wird die IP-Adresse manuell konfiguriert so muss zwingend auch die Adresse des DNS-Servers eingetragen werden.

    3. Installation oder Update des System:
    Es müssen nun mindestens 3 MB freier Flashspeicher zur Verfügung stehen um Installationen/Updates vorzunehmen.
    Vor Installation eines ipk's vom newnigma2 team, wird geprüft, ob für dieses Paket noch genügend freier Speicher vorhanden ist.
    Sollte das nicht der Fall sein, bricht die Installation ab.
    !!Achtung das enigma2 Paket benötigt min 9MB!!

    4. Bei Problemen mit dem Update auf v4.0.18:
    Sollte das Update auf v4.0.18 nicht funktionieren, weil dem enigma2 Paket keine 9MB zur Verfügung stehen, so ist zuerst der newnigma2 installer zu aktualisieren.
    Nach anschließendem reboot kann man den Upgradevorgang via gui fortsetzen. Dabei wird der Check des freien Speichers beim Upgrade auf den Wert gesetzt, der unter
    "blaue Taste -> Newnigma Services -> System Werkzeuge -> Experten Einstellungen -> min. free space" eingestellt ist.


    Your
    Newnigma2 Team



    Image:


  6. #16

  7. #17

    Re: Απ: Newnigma2 OE 2.0 DM8000

    Καλημέρα σε όλους με Υγεία και Χρόνια καλά !!

    Διάφορες αναποδιές στη ζωή , με είχαν αναγκάσει να μην ασχοληθώ για πολλά χρόνια με τον αγαπημένο Dreambox μου 8000HD και γενικά την ενασχόληση μου με τα δορυφορικά πεπραγμένα...Πλέον όμως , επανεγκατέστησα το πιάτο και το σύστημα μου και ω του θαύματος , το σκυλί δουλευει ακόμα με το τελευταίο image που ειχα, OpenPli 4.0.
    Θα ήθελα να ρωτήσω και να ζητήσω βοήθεια στο εξής : χρησιμοποιώ το DM8000 και ως DVB-T δέκτη για Digea , σε παλιά TV και θέλω παρα πολύ να μπορώ να παρακολουθώ HbbTV όλων των καναλιών.
    Το ανωτέρω Newnigma2 θα μου προσφέρει αυτή τη δυνατότητα ,χωρίς προβλήματα; Εχει ενσωματωμένο HbbTV plug in ? ή μπορώ να φορτώσω κάποιο?
    Αν όχι, μπορείτε να μου προτείνετε/καθοδηγήσετε σε κάποιο άλλο image ?
    Χρειάζομαι γενικά ξεσκούριασμα μετά από τόσα χρόνια, αλλά πιστεύω οτι μιας και το "μικρόβιο" ακόμα με γαργαλάει, με τη βοήθεια σας θα μπορέσω να το ξυπνήσω !!

    Ευχαριστώ εκ των προτέρων!!

  8. #18

    Re: Απ: Newnigma2 OE 2.0 DM8000

    Καλή Χρονιά !!! Υγεια Πάντα!!
    Μάλλον δεν πολυασχολείται πλέον ο κόσμος με τον DM8000...Οποιαδήποτε απάντηση , καλοδεχούμενη!! Ευχαριστω και πάλι!!

  9. #19

    georgeflu's Avatar
    Join Date
    Jan 2011
    Location
    ptolemaida
    Age
    44
    Posts
    12,426
    Rep Power
    4091704

    Re: Απ: Newnigma2 OE 2.0 DM8000

    o dm8000 ειναι ενας δεκτης πιο παλιας σειρας, και οχι τοσο κοινος, λογω της τιμης που ειχε...

    παρ ολα αυτα, ειναι και σημερα αξιολογος.
    το θεμα ειναι οτι γενικα οι dreambox δεν ειναι τοσο δημοφιλεις οσο ηταν, λογω της αποφασης της dreambox για closed source code. (και ομαδες οπως η δικη μας και η openpli επαψαν να τους υποστηριζουν).

    απο εκει και περα, δεν ξερω (πανε πολλα χρονια απο τον τελευταιο μου dreambox) , αλλα, στο openpli δε δουλευει το hbbtv? αν οχι, δοκιμασε να κατεβασεις το openopera απο τα προσθετα (αν δουλευουν ακομα).
    αν δεν... τοτε η μια επιλογη που εχεις (να ψαξεις) ειναι το newnigma, και η αλλη το openatv...(ψαχνοντας και στα 2 το openopera).

    επισης...hbbtv στα ελληνικα καναλια, εχουν μονο τα ερτ, open, skai...και λογω της εκδοσης που χρησιμοποιουν, ισως να μη λειτουργουν σωστα σε καποια προσθετα για hbbtv,ακομα και σε καποιες tv...
    ολα ειναι FLU

    Member SatDreamGr Projects

  10. #20

    Re: Απ: Newnigma2 OE 2.0 DM8000

    Quote Originally Posted by georgeflu View Post
    o dm8000 ειναι ενας δεκτης πιο παλιας σειρας, και οχι τοσο κοινος, λογω της τιμης που ειχε...

    παρ ολα αυτα, ειναι και σημερα αξιολογος.
    το θεμα ειναι οτι γενικα οι dreambox δεν ειναι τοσο δημοφιλεις οσο ηταν, λογω της αποφασης της dreambox για closed source code. (και ομαδες οπως η δικη μας και η openpli επαψαν να τους υποστηριζουν).

    απο εκει και περα, δεν ξερω (πανε πολλα χρονια απο τον τελευταιο μου dreambox) , αλλα, στο openpli δε δουλευει το hbbtv? αν οχι, δοκιμασε να κατεβασεις το openopera απο τα προσθετα (αν δουλευουν ακομα).
    αν δεν... τοτε η μια επιλογη που εχεις (να ψαξεις) ειναι το newnigma, και η αλλη το openatv...(ψαχνοντας και στα 2 το openopera).

    επισης...hbbtv στα ελληνικα καναλια, εχουν μονο τα ερτ, open, skai...και λογω της εκδοσης που χρησιμοποιουν, ισως να μη λειτουργουν σωστα σε καποια προσθετα για hbbtv,ακομα και σε καποιες tv...
    Κατ'αρχάς, χιλια ευχαριστω για την απάντηση και τον χρόνο σου!!
    Όντως πρόκειται για τρομερής ποιότητας hardware ,γι'αυτο και ειχα χωσει το χέρι βαθιά...Δυστύχώς δεν περίμενα και γω αυτη την απόφαση της DMM για κλειστό λογισμικό...

    Πρόσθετο openopera δεν βρισκω στο openpli 4.0 το οποιο τρέχω αυτη τη στιγμή, ουτε οσα hbbtv plugins κατεβάζω λειτουργούν..

    Πιστευεις οτι το newnigma απ' αυτό το νήμα θα με βοήθήσει;; Είδα στηνπεριγραφή οτι υποστηρίζει hbbtv,σωστά;

    Γνωρίζω οτι ελληνικα hbbtv ειναι προβλήματικά άλλα θα ήθελα να δοκιμάσω, απλά δεν γνωρίζω ποιό image με embedded hbbtv να ψάξω.
    Θα κοιτάξω και το openatv ελπιζοντας να βρω το σωστό.

    Οποιαδήποτε περαιτέρω συμβουλή σου , εννοείται ειναι ανεκτίμητη!!

    Ευχαριστώ φίλε Μπάμπη...ουπς..Γιώργο Φλου !!

Page 2 of 3 FirstFirst 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Newnigma2 DM 500 HD
    By korn in forum Images Dm500 HD
    Replies: 20
    Last Post: 07-10-13, 21:27
  2. OE2 newnigma2-Unstable 4.0 Image-dm8000
    By underconstruction in forum Images Dm8000
    Replies: 4
    Last Post: 26-07-12, 11:46
  3. Newnigma2 DM 800 SE
    By korn in forum Images DM800SE
    Replies: 13
    Last Post: 28-03-12, 16:44
  4. Newnigma2 DM 800 HD
    By korn in forum Images Dm800
    Replies: 16
    Last Post: 28-03-12, 16:42
  5. NEWNIGMA2
    By adams in forum ..Περί Dreambox Enigma2
    Replies: 1
    Last Post: 22-02-12, 08:53

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •