1. Create a folder in the root of your USB stick called vuplus

2. Inside the vuplus folder, make another folder called solo

3. Copy the following USB Image files from your PC to the vuplus/solo folder on your USB stick
boot_cfe_auto.jffs2
kernel_cfe_auto.bin
root_cfe_auto.jffs2
4. Power-off the Solo

5. Insert the USB stick in the front USB port of the Solo

6. Power on the Solo

The display window will show an orange/red LED constantly lit.
This means it's reading the data from the USB Pen into the buffer.

Then...

The display window will show the orange/red LED flashing.
This means it's now flashing the data to the receiver.

Wait until the LED changes to a Green Flashing LED.

When Green LED is flashing you can now safely power off the receiver and remove the USB Pen Drive.

Now Power on and wait for the receiver to boot.