New Bootloader for Xtrend ET10000.

This version increase the limit of the bootloader to 200MB.
So an image for ET10000 not exceeding 200MB can be flashed on the ET10000.


1. Download the zip file from the Download link above.
2. Unzip and copy + paste the et10000 folder on to your USB Stick
3. Insert USB Stick to your ET10000.
4. When you see the message "Flash Image?" on your front display, press the CH 'down' key (instead of the 'up' key which you would normally use to flash an image).

[Only registered and activated users can see links. ]