TM-800 HD-08-01-2010
Below list fixed
1-G wifi router
2-PVR
3-Cam d 3
4-Static ip display
5- Lip sync
6-Enhanced performance of channel change and inside menus.
Code:http://download.for-better.biz/bbs/upload/tm800hd/10_TM800_update.bin
TM-800 HD-08-01-2010
Below list fixed
1-G wifi router
2-PVR
3-Cam d 3
4-Static ip display
5- Lip sync
6-Enhanced performance of channel change and inside menus.
Code:http://download.for-better.biz/bbs/upload/tm800hd/10_TM800_update.bin
0100010001110010001011100100010001110010011001010110000101101101
Member SatDreamGr Projects
DW modifications
Rytek Auto EPG updater installed
Rat's boquets installed (Sky UK 28.2E 1/1/11)
Cool TV EPG installed New version, SkyHD layout (ish)
EPG search facility installed
EPG to timer facility installed
Spinning cogs replaced with scanner
Jimux Ppanel toolkit installed
Rats channel list updater
CCcam switch installed
Improved CCcam Ppanel
CCcam.cfg reduced to only needed lines
CCcam info installed
Jimux audio player (wav files only)*
Numerous other DW customisations
*make a directory on your hard disk to store '.wav' files.
Any directory name will do as it searches /media/ for '.wav's.
Then just load a few 'wav's, run the option to 'Find Audio Files'
(yellow button, 'ppanels', 'Music Jukebox' and you are ready to go.
Thanks to everyone involved in making these modifications possible.
Fixed green screen issue when pressing yellow button after changing skin
NEW!! quick button shortcuts
red button download softcam keys
red long press launch CCcam switch
green button open Cool EPG
green long press search EPG
yellow button Ppanels
yellow long press import EPG
blue button EMU / DL panel
blue long press launch CCcam info
Image resolution set to 1080i @ 50Hz
Tuner set to fixed single feed @ 28.2E
I have tested, numerous times, switching back and fore between WiFi and ethernet, with no problems. When activating WiFi, allow the confirmation message to count down from 10 to 0 on its own. I also have a small 256Mb USB stick permanently connected to the rear socket, and my HDD has been available during every boot
DO NOT FLASH THIS IMAGE TO A RECEIVER THAT HAS NOT BEEN JTAGGED BY TECHNOMATE. YOU RISK DAMAGING YOUR RECEIVER BEYOND REPAIR, AND MAY VOID THE WARRANTY!!
UR
This image is based on the UR image of 08/01/2011, so also contains the same fixes and / or bugs. Built from SVN Rev 309. Customised by digidude, partially @ source.
Theres a possibility that trying to factory reset after messing with other things may cause a green screen, but you can reflash via MINIROOT to get back to all the defaults of this backup image
CoolTV EPG useage
The layout and some buttons of CoolTV EPG have been changed from default, and listed to enhance use of it within this image. Once your EPG data is populated (either auto or manual via long press of yellow button) you will have a guide layout similar to a sky+HD receiver
a mini screen showing part of the picture, a list of 9 channels at the bottom, and the synopsis of the highlighted programme at the top
Press green button to view the EPG, (or press and hold EPG button and choose coolTV guide), and to browse the EPG you can use the following buttons
2 Page up
8 Page down
4 - 2 hours
6 + 2 hours
< - 24 hours
> + 24 hours
9 View primetime TV (20:00 - 22:00)
0 Return to present time
You can also use the arrows on the remote to step un, down, left and right
Press OK to Zap to the highlighted channel, and exit the EPG
Thanks Digidude
Download
Code:http://technomatesoftware.co.uk/Linux based receivers/Digitalworldz images/UR modified/TM800_update jtag DW 010911.rar
0100010001110010001011100100010001110010011001010110000101101101
Member SatDreamGr Projects
TM800_update-UR-2011-02-02
URSR+UR
1-Fixed ftp uploading bug ( problem : when uploading by ftp, files was broken)
2-connax card with cccam in local card reader.
3-when high bitrate scrambled channel recording
4- Improve VMS timer
5-Improve factory-reset ( clear ip information and local cs account information
Download
Code:http://download.for-better.biz/bbs/upload/tm800hd/11_TM800_update.bin
0100010001110010001011100100010001110010011001010110000101101101
Member SatDreamGr Projects
Tm800-23-04-11-dwur
Some recommendations for flashing and using this image
Prior to flashing, do a full factory reset on your existing image, and turn the power off for 30 seconds.
It is recommended (but not essential) to have some form of USB storage in the REAR USB socket if you have an internal HDD fitted.
OK, now down to the image
Flash as normal, all the usual DW graphics are present, one or 2 little tweaks to the wizard, green screen (which you hopefully wont get to see) and some of the DW customisations of the skin have been carried out. The default skin font has been changed, which should hopefully sort out the issue with some special carachters.
The usual EPG importer has had its files and working messed about with to work with the new python scripts. Same with EPG search, autotimer and a few other little bits.
a new and improved webinterface has been installed, but, live streaming is still an issue
One of the biggest changes in this image is the Cool TV Guide, or should i point out, the lack of it.
Cool TV Guides source files are completley closed, and as it was compiled withan older version of python, its not compatible with the new python, ive tried everything for 2 days.
You can still import the EPG and use the Graphical multi EPG though
A word of warning. Due to the new python, installing untested plugins can put your receiver into a crash loop, and only a reflash will recover it. All of the pre installed plugins within this image have been tested to death, and in some cases (EPG import being one) had their file structure changed to ensure compatibility
thx digidude
TM800-DWiQ-03-07-11
Based on the iQ release dated 24-06-11
Contains:
1-Cool EPG
2-Auto EPG importer
3-Latest rytec EPC sources
4-EPG search
5-Zap history browser
6-Updated Web Interface
7-digidudes customiser
8-digidudes advanced plugin
9-***Network mounts fixed***
10-***Rear USB mapping fixed***
11-***Picon paths to USB fixed***
12-Zap times hugely improved*
13-MD5: 2997e3cda1fac80324944ebe9b142a67
14- With all of the above installed, still start with over 5Mb free memory
*Zap times can be delayed greatly if picons are stored on HDD instead of USB flash memory as the HDD has to spun upto read the channels picon prior to zapping channel, this adds around 3 seconds to some zap times
TM800-DWiQ-03-07-11 v2
Since the last release (yesterday) a few requests / suggestions etc have been made, and while they may not be huge fixes, ive implemented them and recompiled from the same files yesterdays image was built from.
Info for tonights release are:
1. Fastzap now defaulted to NO, this fixes the 'flash' of the last viewed channel when turning over.
2. Quick boquets now defaulted to YES, when using chan +/- itll jump to the next boquet channels instead of looping in the one boquet.
3. 'Ugly' dish moving icon replaced
4. Default HDD spindown changed from 5 mins to 30 secs
5. New MD5 Sum 75e96d634cbdd4530b89761309f4d112 TM800-DWiQ-03-07-11.zip
Compiled from source, based on the iQ release dated 24/06/11, SVN Revision # 20
As this is only a minor update, its still downloadable from the same link as yesterdays release, as below.
Contains:
1-Cool EPG
2-Auto EPG importer
3-Latest rytec EPC sources
4-EPG search
5-Zap history browser
6-Updated Web Interface
7-digidudes customiser
8-digidudes advanced plugin
9-***Network mounts fixed***
10-***Rear USB mapping fixed***
11-***Picon paths to USB fixed***
12-Zap times hugely improved*
13- With all of the above installed, still start with over 5Mb free memory
*Zap times can be delayed greatly if picons are stored on HDD instead of USB flash memory as the HDD has to spun upto read the channels picon prior to zapping channel, this adds around 3 seconds to some zap times
There are currently 1 users browsing this thread. (0 members and 1 guests)