Page 1 of 8 12345 ... LastLast
Results 1 to 10 of 78

Thread: VIX Image ET6000

  1. #1

    korn's Avatar
    Join Date
    Dec 2010
    Location
    SatDreamGr
    Posts
    51,784
    Rep Power
    2484984

    VIX Image ET6000

    New VIX Image ET6x00 - v2.3 15/12/2011 - Open ViX 2.3







    From VIX Team
    Enigma: 13-12-2011. Enigma Plugins: 13-12-2011. GCC Version: 4.4.4. Kernel Version: 3.1.0. Drivers: 2011-12-12.

    This image requires the latest bootloader (attached to this post) to be flashed. This is because Xtrend have changed the way the drivers work. So, before updating your image, you will need to first flash the bootloader, then flash the new image. Flashing of new bootloader only takes a few seconds, so once flashing's completed, then just turn off the box, transfer the new image to the usb stick, and flash with that. Also, it is recommended to NOT use older images with this new boot loader, as this may result in a bricked box.

    DO NOT UNPLUG POWER SUPPLY DURING BOOTLOADER OR IMAGE FLASHING! DOING SO COULD RENDER YOUR RECEIVER USELESS!

    READ CAREFULLY HOW TO FLASH BOOTLOADER

    Because of a lot of changes behind the scenes of the image and building, you will not be able to perform an online update. A full flash is required for this version of ViX image. However, don't forget that you can use the Backup Manager to create backups of your current settings, and then upon flashing (as long as the location you stored you backup is attached), all your settings and plugins (from feeds) will be reloaded! This revision of the image has undergone many different builds, hours and hours of coding/fixing, and we hope that you are now happy to reflash with the latest ViX image!

    Team ViX Enchancements
    New Features Updated to kernel 3.1.0 - This new kernel is much faster and better than the previous kernel, and finally you all get to test it if you held off updating to other images. If you did update, you can finally come back to the ViX image
    Added items to the Information Screen - Added Devices and System Information to Menu -> Information. In Devices, you get all the information about connected devices on your box (HDD, USB and Network Shares), and System Information will show you your memory on your box (Swap, Free memory etc). See screenshots below for more information.
    Added OSD Settings - This replaces the overscan option within the ViX image. Go to Menu -> Setup -> System -> OSD -> OSD Setup, and ensure the screen fills your TV set exactly to ensure that all menu options are shown correctly for your TV.
    Added support for HDMI-CEC - This image now allows you to control your box using your tv remote. Remember, this is still experimental at the moment, and can work differently between different brands of TV makes/models.
    Added uShare - Allow the box to be detected by your DLNA devices that support this protocol. This can be configured under Menu -> Setup -> System -> Network -> uShare Setup.
    Added MiniDLNA - Same as uShare, but some people were having problems with uShare, so we have added a different version for people to use.
    Added AFP - The Apple Fileshare Protocol makes it easy for your OSX devices to find your box and use the box natively within the OS. This can be configured from Menu -> Setup -> System -> Network -> AFP Setup.
    Added EPG Automatic Refresh - This is useful for members who keep a single EPG datasource on a network share with multiple boxes. In Menu -> Setup -> System -> EPG -> Settings, you have the option to choose a network location (as long as configured within the Mount Manager). If you use this, you might want to update the EPG data from this location automatically. So now you can using the Automatic Refresh option.
    Added Automounts option - This allows the box to automatically recreate network mounts. If you've had times where the NFS of CIFS server has been restarted, or lost power etc, then you'll know that your box cannot access this network share. Well, as long as you have configured the share through the Mount Manager, then you can configure the Automount to automatically remount the share as often as you like by going to Menu -> Setup -> System -> Network -> Devices -> MountManager.
    Default Skin Change - The Default skin has been changed from ViX HD to ViX Day HD. Another ViX skin has been developed for download from the plugin server under the ViX section, called ViX Night HD. This is for those who want a darker skin for their image. See the screenshots below for comparisons between the two. Please report any skin issues you may find with the ViX Night HD skin. We think we have them all covered, but can't be too sure...
    Many plugins translated/made translatable - Allows the plugins to display correctly the information in your own language (as defined on original setup). Deleted a number of plugins - Due to the "war on licences", a number of plugins whose license has changed, has been reverted to the non-licensed version of the plugin, or had to be removed from the image indefinitely.
    Added seekbar functionality to the image - Allow you to seek within a recording playback to where you would like to be within the playback. To utilise this, please hold down the > buttons on your remote, and the seekbar will appear at the top. Use the arrow keys on the remote to choose where you would like to seek to in the playback, and press OK to start playback from this point.
    Added Image Download to Image Manager - This allows you to download the latest full image from the server, and flash it to your box (Vu Only). To access this, go to the Image Manager from with ViX menu, and press the help button. This will list all available images to download.
    Added playback support for FLV files - Now you can add FLV files to your recordings drive and play them natively within the system.
    Lots more under the hood updates/enhancements - A few menu options and screens have become more integrated to their respective menus. For example, the Recording Paths menu is no longer required, as Timeshift Path is defined in Timeshift Setup, and Recording Path in Recording Setup.

    Fixes Tweaked SoftCam manager.
    Corrected a number of plugins.
    Updated network components, including better support for WiFi.
    Updated translatability; updated German & Dutch translations.
    Hidden several ViX-core functions from the plugin-browser.
    Better handling of SWAP partitions by the Mount Manager.
    Tweaked TimeShift Code.
    Remove SD/HD split from ChannelSelection as it was buggy.
    Magic skin updates MenuSort fix.

    New Features:

    Channel Selection - Added NEXT event name and description (see screenshot).
    Updated drivers to 20111212


    Fixes:

    ImageManager - fix image downloads.
    Reverted inadyn to Ver:1.96
    Fix wizard remote in ViX Skins.
    MovieSelection - stop END showing when starting a new movie, when the previoius movie ended whilst movielist was showing.
    Tweaked the way movie description is gathered.



    Button Mappings Short Red** & *** - Show current channel EPG info (ViX Single EPG).
    Long Red*** - Show current event.
    Short Green** & *** - Timers.
    Long Green*** - AutoTimer Timers.
    Short Yellow*** - EPG Search.
    Long Yellow*** - IMDB Database.
    Short Blue - Extensions.
    Long Blue*** - Plugins Menu.
    EPG - Opens ViX EPG. Left/Right** - Opens ViX QuickEPG.
    Left/Right** - Opens ViX QuickEPG.
    Up/Down** - Open Full Screen Channel List.
    Long Up/Down** - Open Simple TV List.
    TV Button** - Open Full Screen Channel List.
    Long TV Button - Open Bouquets List.

    ** Can be changed in ViX Menu
    *** Can be turned off in ViX Menu

    Known Bugs

    Nope

    Special Thanks

    World-of-Satellite.co.uk for providing hardware for testing release image.
    rytec - for his continued support.
    zoka.cc for his Picon sets
    Coolman and all other developers for their plugins used in the feeds of this image.
    All of the ViX Beta team for their hours of testing and dedication on getting this image and DTT working

    Requests If anyone is interested in doing any translation work for the plugins and the image itself, please contact either Andy of Sicilian...



    DO NOT UNPLUG POWER SUPPLY DURING BOOTLOADER OR IMAGE FLASHING! DOING SO COULD RENDER YOUR RECEIVER USELESS!

    READ CAREFULLY HOW TO FLASH BOOTLOADER BELOW














    ViX-2.3.133-et6x00_usb.zip (50.64 MB)





    data_et6000-bootloader-20111020.zip (250.19 KB)






    ET6000 bootloader and how to upgrade

    Before starting the procedure below, ensure that the USB stick is formated FAT32 and has no other files on the stick!







    Preparation
    1) Download the 'et6000-bootloader-20111020' file in the ET6000 menu on this website.
    2) Unzip the downloaded file then 'et5000' and 'et6000' folders will be appeared.
    3) Copy those two folders into the USB Medium

    Insert the USB medium into either USB sockets on the front or rear panel.
    Power Off and Power On the box through the powerswitch at the rear panel of the box.

    After Power On, ET6000 is detecting if there is ET6000 bootloader available on the USB medium.
    When the yellow/orange led shines then there is ET6000 bootloader detected.
    To load the ET6000 bootloader you'll need to press the up button on the frontpanel.
    When the green led will shine together with he yellow/orange led then the box is loading the bootloader.
    Please be patient because it will take couple of minutes to finish upgrading.
    When the yellow/orange led will disappear then the box is finished upgrading the firmware.
    The box will startup automatically after the upgrade is finished.

    -Warning-
    During upgrading, please don't unplug power or shut down STB.
    Don’t power off within 5 seconds after upgrade is completed.
    The frontpanel has 3 leds: RED, GREEN, YELLOW/ORANGE

    -Important Note-
    Don’t upgrade the Bootloader and Firmware at the same time.
    Make sure that in the USB stick only needed files for either Bootloader or Image should be contained while processing for either Bootloader upgrade or Image upgrade.

  2. #2

    korn's Avatar
    Join Date
    Dec 2010
    Location
    SatDreamGr
    Posts
    51,784
    Rep Power
    2484984

    Απ: latest VIX Image ET6000

    Online Update for ET6x00






    [IMG]http://desmond.**************/Himg843/scaled.php?server=843&filename=infosk.jpg&res=medium[/IMG]

    Online Update for ET6x00 now active to bring to Build 204.
    Also available below is the USB File for flashing a clean build of 204.
    Enjoy it guys.

    2.3 Build 204:
    enigma2: LogManager update for log locations.
    enigma2: CrashLogs, both types (normal crashlog and Debuglog) now share the same location (user definable) the new default is '/home/root/logs'
    enigma2: EpgSelection, fix multiepg channel preview and clean up all epg code.
    enigma2: fix issue with timers and standby and new trashcan.
    enigma2: EPGSelection: graphical epg update.
    enigma2: TrashCan: fix possible error screen, Deepstandby issues.
    enigma2: InfobarGenerics: fix 2nd info bar timeout.
    feeds: add 'dvb-usb-af9035'
    linux: add dvb-usb patches by Gennar1 (etx000 and vuplus)
    xmltv-importer: add auto creation of swap in needed.
    ViX-core: BackupManager: now allows more than one backup per day.
    ViX-core: RestoreWizard: now does not show if no backup are found, also backups are now listed last backup at top of list, also fixed a bug where if a device did not have any backups on but another did both devices listed same backups.
    ViX-Night/Day skins: updated QucikEPG to include description.

  3. #3

    Απ: latest VIX Image ET6000

    2.4 Build 112:

    ViX 2.4-112 NOW ONLINE

    This update is largely un-tested therefore would all users please backup their images prior to updating. To update to 111 you will need to enable unstable updates. Menu > Setup > System > Online update > Set allow unstable updates to YES.

    enigma2: HelpMenu: fix posible BSOD.
    enigma2: fix 3D setting on Vu's.
    openwebif: add new ViX setting menu to Menu Panel (still needs work).
    picons: update zonka.cc to 2012-05-17
    system: merge from PLi 18-05-2012 - this includes Linux 3.3 for ET's.
    vix-skins: update transponder info for new PliExtraInfo, fix simple channelselection screen title.

    DOWNLOAD

  4. #4

    Απ: latest VIX Image ET6000

    OpenViX 2.4-119 ONLINE NOW

    Code:
    2.4 Build 119:
    enigma2: PliExtraInfo, fix for terestrial tuners.
    enigma2: more detailed MemoryInfo screen thanks to Ralf.
    translations: updates, thanks 'jerry00', 'Ralf', 'Rob'
    vix-skins: fix IMDB stars (thanks regarto)

  5. #5

    Απ: latest VIX Image ET6000

    OpenViX 2.4-124 NOW ONLINE


    2.4 Build 124:
    feeds: remove channelsettings, bootlogos & picons by silverfox0786 at his request.
    Translations: CS update thanks 'jerry00', 'Rob'

    http://www.sendspace.com/file/ns34j3

  6. #6

    Απ: latest VIX Image ET6000

    OpenViX 2.4-128 NOW ONLINE
    Code:
        2.4 Build 128 changelog:
    
        enigma2: made DolbyDigital audio tracks default, as most channels use NAR on pcm tracks.
    http://www.sendspace.com/file/0y6ixb

  7. #7

    Απ: latest VIX Image ET6000

    OpenViX 2.4-130 NOW ONLINE


    ViX-2.4.130-et6x00_usb.zip

  8. #8

    Απ: latest VIX Image ET6000

    OpenViX 2.4-134 NOW ONLINE.

    2.4 Build 134:
    enigma2: fix possible none starting box.


    OpenViX 2.4-134 NOW ONLINE.

  9. #9
    underconstruction's Avatar
    Join Date
    Jun 2011
    Location
    Germany *** Bavaria***
    Posts
    577
    Rep Power
    144

    Re: latest VIX Image ET6000

    ViX-2.4.151-et6x00




    2.4 Build 151:
    enigma2: fix BSOD with help/wizard screens.
    Also fixed IMDB failure to download error thanks to regarto
    ***Download***
    Bavaria the real Germany
    I Love my Dreambox DM7020HD

  10. #10
    underconstruction's Avatar
    Join Date
    Jun 2011
    Location
    Germany *** Bavaria***
    Posts
    577
    Rep Power
    144

    Re: VIX Image ET6000

    Bavaria the real Germany
    I Love my Dreambox DM7020HD

Page 1 of 8 12345 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

Similar Threads

  1. Power of Dream HD+ Image for ET6000
    By ilias in forum Images Clarke-Tech & Xtrend
    Replies: 14
    Last Post: 08-04-14, 11:52

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •