Xtrend ET-6000 HD Linux Full HD HDTV USB PVR ready Sat Receiver






Xtrend ET-6000 HD Linux Full HD HDTV USB PVR ready Sat Receiver


A new generation of HD Linux E2 single-tuner receiver from Xtrend with crystal clear HD picture, two card readers. External hard disk is possible via USB port. A USB front and two behind. In addition, the receiver has an Ethernet 10/100 connection. Linux operating system with E2 HD Open Source. Standby consumption is only 1 watt. Extended EPG (electronic program guide).

Features:
- 400 MHz MIPS Processor
- MPEG-2 / H.264 Hardware Decoding
- 1x DVB-S2 Tuner
- Webbrowsing and HbbTV on TV
- Supports Downloadable Plug-ins
- STB Board for a special anti-copy technology
- Auto Scalable Screen for TV and Skin
- 1080P@30 full HD


Mit Open source Software bleiben bei diesem Receiver keine Wünsche offen.
Mit 3 USB Schächten haben Sie die Wahl auf PVR, MP3, JPEG, Software Updates und vieles mehr.

Multimedia Player
Supports Skin Change
Supports Samba
Supports PIP
Supports 3D OSD
Supports EPG
Supports Automatic and Manual Service Scan
Supports Multiple LNB control (DiSEqC)
Scalable frame buffer

Technische Daten:
Main System
CPU: BCM7405
Flash Memory: 128 MB
DDR: 512 MB

Front Panel
Display: 3 LED
Smart Card Slot: 2
USB 2.0: 1
Key: 5 Keys

Rear Panel
Power Switch: 1
Sat-IF input/output: 1xF-type socket / 1xF-type socket
Video output (analogue): 3 x RCA socket (YPbPr) / 1 x RCA(CVBS)
Audio output (analogue): 2 x RCA
Audio output (digital): S/PDIF
USB: 2 x USB 2.0
Ethernet: 10/100BaseT
RS 232: 1

Power
Mains voltage: 950 - 250 /50 - 60 V / Hz
Power consumption (Max./typ. operation/stand-by): 35/20/1 W

RF
RF range: 950-2, 150 MHz
Modulation, FEC, de-multiplexer: DVB-S/S2 standard

Video
Video resolution: CCIR 601 (720*576 lines), 576p, 1080i, 1080p @ 30
Video decodung: WMV9, MPEG-2, MPEG-4 compatible
Aspect ratio: 4:3, 16:9, Letter
Input data rate: 2-45 MSymb/s
S/N: > 53 dB

Audio
Audio decoding: WMA9, AC3, MPEG-4 (AAC-HE), MPEG-1, Layer 1, 2 and 3
Sampling rate: 32/4.1 / 48 kHz
S/N: > 65 dB

LNB
LNB supply (horiz./vert.): 14/18: Max. 400mA
Control signal: 22 kHz ToneBurst DiSEqCTM 1.0/1.1/1.2

General
Maße (WxHxD): 260x45x220cm
Gewicht: 2kg