EgamiBoot 1.0 - MultiBoot Plugin


[IMG]http://img62.**************/img62/5762/1942004e25c65eb8a54.jpg[/IMG]

EgamiBoot BETA 1.0 - ONLY FOR PEOPLE WHO HAS GOT HARD-RIVE INSTALLED - IT WON'T WORK ON USB STICKS !!!

- Very light and simple MultiBoot Plugin by EGAMI TEAM for ET-Series recivers.

To use EgamiBoot, you need to install a Hard Drive - HDD device, and format it in EXT3 file format and mount it.

You can format and mount the device by Egami Devices Panel.

After installing your device, you have to enable EgamiBoot by opening it by MENU->EgamiBoot->Install

Now, via an FTP software, you have to upload one or more nfi or *bin ( rootfs.bin )image into /media/egamiboot/EgamiBootUpload and then into EgamiBoot panel you have to select Install Image (green button).


Therefore, a new panel will be open and you will be able to select which image you want to install by moving left and right arrows on your remote control into Source Image file option.


Once you select an image to install, by moving the remote control arrow down, you will select the Image Name option and you will be able to write the name of the image you are installing (it will be the same you will see in EgamiBoot menu panel after installing).

Finally, by moving remote control down arrow again, you will find the option to choice if to Copy setting to new Image or not to do it.

EgamiBoot support installing *NFI images from VU+ / DM recivers and rootfs.bin files from ET9000

Tested images:

VU+:

- BlackHole 1.6.3
- VTi 2.2

DMM:

- EDG-Nemesis 2.1
- Newnigma 3.2.2
- Peter Pan Never Land 2.2

ET:

- support for all images !!

To use it EGAMI must be in FLASH!

Stay Tuned... it will arrive SOON