New Experimental SatDreamGr 8 Images
Page 3 of 4 FirstFirst 1234 LastLast
Results 21 to 30 of 35
  1. #21

    ilias's Avatar
    Join Date
    Jan 2011
    Posts
    5,091
    Total Downloaded
    0
    Rep Power
    3464

    Απ: BackupSuite plugin

    Backupsuite 15.2

    Changed in version 15.2
    - Reworked some code to automatic detect on which mtd the kernel is. This makes it a bit easier to add more models in the future.
    - Moved some code to another place to make it more readable

    Changed in version 15.1
    - Minor code change in representation used time


    [Only registered and activated users can see links. ]

  2. #22

    ilias's Avatar
    Join Date
    Jan 2011
    Posts
    5,091
    Total Downloaded
    0
    Rep Power
    3464

    Απ: BackupSuite plugin

    Backupsuite 16.0

    Changed in version 16.0
    Made the application more universal and easier to maintain for future models.
    Now all supported brands/models are placed in a matrix (lookuptable.txt) with their parameters needed to make a back-up
    Now all what has to be done to support a new brand/model is enter the specifics into the lookuptable.txt, an example is show hereunder.
    I moved the version (after some internal betaversions) to 16.0 because of the big changes in the code.
    All is tested and should work fine

    Thx Pedro_Newbie

    [Only registered and activated users can see links. ]

  3. #23

    ilias's Avatar
    Join Date
    Jan 2011
    Posts
    5,091
    Total Downloaded
    0
    Rep Power
    3464

    Απ: BackupSuite plugin

    Backupsuite 16.1

    Changed in version 16.1
    2 little bugfixes

    Thx Pedro_Newbie

    [Only registered and activated users can see links. ]

  4. #24

    ilias's Avatar
    Join Date
    Jan 2011
    Posts
    5,091
    Total Downloaded
    0
    Rep Power
    3464

    Απ: BackupSuite plugin

    Backupsuite 16.2

    Thx Pedro_Newbie



    [Only registered and activated users can see links. ]

  5. #25

    ilias's Avatar
    Join Date
    Jan 2011
    Posts
    5,091
    Total Downloaded
    0
    Rep Power
    3464

    Απ: BackupSuite plugin

    Backupsuite 16.3

    Changed in version 16.3
    Fixed some little bugs for the Vu+'s
    Adjusted description imageversion
    Corrected lookuptable


    Thx Pedro_Newbie

    [Only registered and activated users can see links. ]

  6. #26

    ilias's Avatar
    Join Date
    Jan 2011
    Posts
    5,091
    Total Downloaded
    0
    Rep Power
    3464

    Απ: BackupSuite plugin

    BackupSuite plugin 16.4




    Full Backup Suite 16.4


    [Only registered and activated users can see links. ]

  7. #27

    ilias's Avatar
    Join Date
    Jan 2011
    Posts
    5,091
    Total Downloaded
    0
    Rep Power
    3464

    Απ: BackupSuite plugin

    Backupsuite 16.6

    corrected bug


    Thx Pedro_Newbie


    [Only registered and activated users can see links. ]

  8. #28

    kalkan99's Avatar
    Join Date
    Jul 2012
    Location
    Adana/Turkey
    Posts
    489
    Total Downloaded
    0
    Rep Power
    1554

    Cool Full Backup Suite 16.8 versiyon

    Changelog

    Changed in version
    16.8

    Added support for Atemio 5200 and Atemio Nemesis (untested)
    Added
    configurable UBINIZE_ARGS in lookuptable
    Added testing of the dumped kernel
    on size, if not as expected then the part of the flash where the kernel resides
    is tested for bad blocks, this is only reported in the
    backupsuite.log

    Current
    lookuptable.txt








    Version
    16.7 only used for some testing




    [Only registered and activated users can see links. ]

  9. #29

    ilias's Avatar
    Join Date
    Jan 2011
    Posts
    5,091
    Total Downloaded
    0
    Rep Power
    3464

    Απ: BackupSuite plugin

    Backupsuite 17.0


    Code:
    Changed in version 17.0
    - Now the total program is in one folder: BackupSuite, the "old" folders BackupSuite-HDD and BackupSuite-USB are discarded
    - After starting the plugin you can choose to make a backup on HDD(and on USB) or USB only, so there are no 2 separate plugins anymore, just 1 plugin
    - The name of the plugin is BackupSuite and is as such in the plugin list, so don't look for Voll-backup or similar
    - The plugin is also placed under the blue button for fast access, press the Blue button and it should be there somewhere on top of the list
    
    Also changed:
    Added the file noforce.update (only for certain VU+ models)
    The file noforce.update works simular as the file noforce on the other brands.
    
    If you want to flash, with use of an USB-stick, your VU+ (all models except Duo & Solo) without the need to push a button to confirm the flashing you can rename the file noforce.update into force.update
    If you use this option it may be wise to delete the file reboot.update which causes the receiver to reboot automatic after flash, if you forget to remove the USB-stick the box will be flashed again after reboot.
    If you delete the file reboot.update the system waits until it is rebooted by hand.
    
    Lowered the value at which a fatal warning is given when trying to back-up an image greater than 120 MB on Xtrend machines.
    The former warning was set at 128 MB but this value has been proven too high. I couldn't restore an image at around 125 MB with the use of an USB-stick
    
    
    BUT THE BIGGEST CHANGE!
    In the program you can now also restore backups online without the use of an USB-stick using Betacentauri's excellent tool ofgwrite
    This has several advantages:
    - much faster flashing
    - restoring backups greater than 120MB is now no problem anymore on the Xtrends
    
    The plugin is not completely translated at the moment so there will be a mix of English and German messages.
    
    The backup process itself isn't changed, it is the familiar screen as in the first posting.
    When you start the plugin you have the following choices:
    RED BUTTON Cancel/Exit
    GREEN BUTTON
    Backup to HDD (and USB if a valid USB-stick is inserted)
    YELLOW BUTTON
    Backup to USB
    BLUE BUTTON
    Restore/Flash a back-up or fresh image from harddisk or any mounted device.
    INFO BUTTON Some information about the update, in future releases you can read the changes of that version
    
    The plugin is a very early version so it could be that there are some errors (not in the backup process itself because that isn't changed)
    
    Also my Python programming skills are next to nothing so if an python specialist is in for a good laugh please look at the code (and give some tips )
    
    The startscreen look likes the first screenshot (don't worry the dog won't bite, I just parked it there for the moment, in the near future I will find good use for the space)
    The restore screen could look like the second screenshot.
    
    
    
    
    
    I'm searching for translators who can complete the language files, so for all languages (except Dutch) please feel free to contribute
    
    And finaly a BIG THANK YOU to Betacentauri for his excellent binary which enables the online flashing and
    DIMA73 for his plugin from which I cannibalized the python restore part!
    Thx Pedro_Newbie


    [Only registered and activated users can see links. ]

  10. #30

    kalkan99's Avatar
    Join Date
    Jul 2012
    Location
    Adana/Turkey
    Posts
    489
    Total Downloaded
    0
    Rep Power
    1554

    Cool Full Backup Suite 17.1 versiyon

    Changed in version 17.1
    First of all as you will see the skinning is completely changed.

    A full changelog is visible under the info button

    Completed the following languages, many thanks to the contributors: French -Talbs, German - Biki3, Greek - Glamourservices (new translation), Polish - Blzr, Slovak - Dym1, Spanish - Agmuser, Turkish - RogerSSD.
    I'm still looking for translators who can translate into: Italian and Russian

    I added a line after all the translation work, the English text is: "What is new since the last release?". I translated it with googletranslate and added it. If it is not properly translated please let me know what the proper sentence is for your language.

    After installation there will be checked if there are still remains of the old plugin, if the old folder BackupSuite-HDD is present it will be deleted. (There could be left an old speed.txt.opkg or speed.txt.opkg.backup file)
    Replaced the picture of the plugin.
    Played/tested somewhat with the Python code (still heavy learning)

    Added support for the STB Ixuss Zero (thanks Athoik for supplying the data for this receiver)





    [Only registered and activated users can see links. ]

Page 3 of 4 FirstFirst 1234 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. BackupSuite and Octagonsf8008
    By lex7791 in forum SF8008
    Replies: 14
    Last Post: 15-01-19, 23:18
  2. ΠΡΟΒΛΗΜΑ BACKUPSUITE
    By tasosh4 in forum Enigma2 Plugins ΟΕ 2.0
    Replies: 3
    Last Post: 29-12-17, 13:30
  3. current problem with the Backupsuite, before it worked
    By stephan94 in forum English Section General
    Replies: 1
    Last Post: 21-12-17, 17:05
  4. Backupsuite
    By ricki in forum English Section General
    Replies: 3
    Last Post: 06-09-16, 07:41
  5. BackupSuite
    By sat gr in forum Enigma2 Plugins ΟΕ 2.0
    Replies: 26
    Last Post: 03-10-15, 15:47

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •