SatDreamGr 10 -Python 3

[tendy70a]

Σε ευχαριστω καλη δυναμη και καλη συνεχεια.

[yazoo]

Πέρασα χθες το τελευταίο Xtreamity 4.39 και μετά την ενημέρωση της λίστας με το user & password και πατώντας την αποθήκευση, μου εμφανίζει το μήνυμα ότι τα στοιχεία δεν είναι σωστά.
Υπάρχει η πιθανότητα το plugin να μην λειτουργεί ακόμη 100% με το SDG10 μια και δεν υπάρχει και στην λίστα με τα plugins;

[georgeflu]

προσωπικα δεν εχω χρησιμοποιησει ποτε το plugin (ουτε το εχω εγκαταστησει απο περιεργεια).

το να μην ξεκιναει καθολου, θα μπορουσε να συμβαινει
το να ξεκιναει αλλα να σου πεταει διαφορα σφαλματα, ειναι επισης πιθανο...

το να πανε ολα καλα και να σου βγαζει λαθος στοιχεια..., θα μπορουσε να συμβαινει, αλλα με λιγοτερες πιθανοτητες...
ψαξε να βρεις με ftp που κραταει τα config, και δοκιμασε να τα γραψεις απευθειας απο εκει (και οχι απο τον text editor του image) μηπως και αλλαξει κατι...?

[WS460]

Selecting A/V settings (path Setup - System - Audio / Video) on my Octagon SF4008 results a crash:

OpenPLi Enigma2 crash log

crashdate=Thu Mar 7 23:02:59 2024
compiledate=Feb 25 2024
skin=PLi-FullNightHD/skin.xml
sourcedate=2024-02-25
branch=develop
rev=3d1449b
component=Enigma2

stbmodel=sf4008
stbmodel=ultimo
stbmodel=dm800se
kernelcmdline=root=/dev/mmcblk0p4 rootwait rw vmalloc=692m bmem=700m@324m
nimsockets=NIM Socket 0:
imageissue=satdreamgr 10 %h


REMOVE Peer sf4008
REMOVE Peer sf4008
REMOVE Peer sf4008
[eListboxPythonConfigContent] second value of tuple is not a tuple.
[eListboxPythonConfigContent] second value of tuple is not a tuple.
[eListboxPythonConfigContent] second value of tuple is not a tuple.
[eDVBChannel] getLength failed - can't seek relative to end!
[eDVBChannel] getLength failed - can't seek relative to end!
[eDVBRecordFileThread] wait: aio_return returned failure: Interrupted system call
[eListboxPythonConfigContent] second value of tuple is not a tuple.
[eListboxPythonConfigContent] second value of tuple is not a tuple.
[eListboxPythonConfigContent] second value of tuple is not a tuple.
[eListboxPythonConfigContent] second value of tuple is not a tuple.
[eListboxPythonConfigContent] second value of tuple is not a tuple.
[eListboxPythonConfigContent] second value of tuple is not a tuple.
[eListboxPythonConfigContent] second value of tuple is not a tuple.
[eListboxPythonConfigContent] second value of tuple is not a tuple.
[eDVBChannel] getLength failed - can't seek relative to end!
[eDVBChannel] getLength failed - can't seek relative to end!
[eDVBRecordFileThread] wait: aio_return returned failure: Interrupted system call
Traceback (most recent call last):
File "/usr/lib/enigma2/python/Components/ActionMap.py", line 77, in action
File "/usr/lib/enigma2/python/Components/ActionMap.py", line 57, in action
File "/usr/lib/enigma2/python/Screens/Menu.py", line 56, in okbuttonClick
File "/usr/lib/enigma2/python/Tools/BoundFunction.py", line 10, in __call__
File "/usr/lib/enigma2/python/Plugins/SystemPlugins/Videomode/plugin.py", line 256, in videoSetupMain
File "/usr/lib/enigma2/python/StartEnigma.py", line 305, in open
dlg = self.current_dialog = self.instantiateDialog(screen, *arguments, **kwargs)
File "/usr/lib/enigma2/python/StartEnigma.py", line 248, in instantiateDialog
return self.doInstantiateDialog(screen, arguments, kwargs, self.desktop)
File "/usr/lib/enigma2/python/StartEnigma.py", line 265, in doInstantiateDialog
dlg = screen(self, *arguments, **kwargs)
File "/usr/lib/enigma2/python/Plugins/SystemPlugins/Videomode/plugin.py", line 43, in __init__
File "/usr/lib/enigma2/python/Plugins/SystemPlugins/Videomode/plugin.py", line 162, in createSetup
NameError: name 'getConfigListEntry' is not defined
[ePyObject] (CallObject(<bound method NumberActionMap.action of <Components.ActionMap.NumberActionMap object at 0xa8058100>>,('OkCancelActions', 'ok')) failed)


dmesg

<4>UDF-fs: warning (device mmcblk0p1): udf_fill_super: No partition found (2)
<4>UDF-fs: warning (device mmcblk0p3): udf_fill_super: No partition found (2)
<3>blk_update_request: I/O error, dev mtdblock2, sector 8
<3>blk_update_request: I/O error, dev mtdblock2, sector 8
<3>Buffer I/O error on dev mtdblock2, logical block 1, async page read
<3>blk_update_request: I/O error, dev mtdblock2, sector 2
<3>EXT4-fs (mtdblock2): unable to read superblock
<3>blk_update_request: I/O error, dev mtdblock2, sector 0
<3>FAT-fs (mtdblock2): unable to read boot sector

[WS460]

After installing sdgradio on my SF4008, I didn't get any DAB signal (other parts of the plugin like fm working fine).

The log shows:
...
failed to open librtlsdr.so.0, fatal
allocating device failed (41), fatal

We can solve this problem via telnet:
root@sf4008:~# cd /usr/lib/
root@sf4008:/usr/lib# ln -s librtlsdr.so.2 librtlsdr.so.0

[stel883]

Για σας, εχω τον osmini4k. Θα ηθελα να δοκιμασω το satdreamgr 10, ευχαριστω

[korn]

Για σας, εχω τον osmini4k. Θα ηθελα να δοκιμασω το satdreamgr 10, ευχαριστω

έχεις π.μ.

[Irte180]

Μετά απο φλασάρισμα,κάνω ενημέρωση λογισμικού και κρασάρει ο δέκτης,συνέχεια.Όλα τα έκανα απο την αρχή,δεν πέρασα τίποτα παλιό και κάνει τα ίδια.Το 10 το ειχα πολύ καιρο στή flash χωρίς πρόβλημα.OpenPLi Enigma2 crash log

crashdate=Πεμ Απρ 4 23:30:57 2024
compiledate=Jan 26 2022
skin=ProteusFHD/skin.xml
sourcedate=2022-01-25
branch=python3
rev=1552486
component=Enigma2

stbmodel=sf4008
stbmodel=ultimo
stbmodel=dm800se
kernelcmdline=root=/dev/mmcblk0p4 rootwait rw vmalloc=692m bmem=700m@324m
nimsockets=NIM Socket 0:
imageissue=satdreamgr 10 %h




dmesg

<6>Booting Linux on physical CPU 0x0
<5>Linux version 4.1.37 (oe-user@oe-host) (gcc version 10.2.0 (GCC) ) #1 SMP Wed Jan 26 17:32:29 UTC 2022
<6>CPU: ARMv7 Processor [420f00f3] revision 3 (ARMv7), cr=30c5387d
<6>CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
<6>Machine model: SF4008_EMMC_DDR4
<6>moving dtb from 0x0000000007628000 to 0x00000000009753d4
<6>bmem: Reserved 700 MiB at 0x0000000014400000
<6>cma: Reserved 16 MiB at 0x0000000012c00000
<4>Forcing write-allocate cache policy for SMP
<6>Memory policy: Data cache writealloc
<7>On node 0 totalpages: 262144
<7> DMA zone: 632 pages used for memmap
<7> DMA zone: 0 pages reserved
<7> DMA zone: 80896 pages, LIFO batch:15
<7> HighMem zone: 181248 pages, LIFO batch:31
<6>PERCPU: Embedded 12 pages/cpu @d23ae000 s16396 r8192 d24564 u49152
<7>pcpu-alloc: s16396 r8192 d24564 u49152 alloc=12*4096
<7>pcpu-alloc: [0] 0 [0] 1
<6>Built 1 zonelists in Zone order, mobility grouping on. Total pages: 261512
<5>Kernel command line: root=/dev/mmcblk0p4 rootwait rw vmalloc=692m bmem=700m@324m
<6>PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>Memory: 296756K/1048576K available (6867K kernel code, 213K rwdata, 2072K rodata, 296K init, 188K bss, 735436K reserved, 16384K cma-reserved, 8188K highmem)
<5>Virtual kernel memory layout:
<5> vector : 0xffff0000 - 0xffff1000 ( 4 kB)
<5> fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
<5> vmalloc : 0xd4000000 - 0xff000000 ( 688 MB)
<5> lowmem : 0xc0000000 - 0xd3c00000 ( 316 MB)
<5> pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
<5> modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
<5> .text : 0xc0008000 - 0xc08c32d0 (8941 kB)
<5> .init : 0xc08c4000 - 0xc090e000 ( 296 kB)
<5> .data : 0xc090e000 - 0xc0943610 ( 214 kB)
<5> .bss : 0xc0946000 - 0xc09753d4 ( 189 kB)
<6>Hierarchical RCU implementation.
<6> RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
<6>RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
<6>NR_IRQS:16 nr_irqs:16 16
<6>irq_brcmstb_l2: registered L2 intc (mem: 0xd4002000, parent irq: 93)
<6>irq_brcmstb_l2: registered L2 intc (mem: 0xd4008000, parent irq: 64)
<6>irq_brcmstb_l2: registered L2 intc (mem: 0xd400a640, parent irq: 95)
<6>irq_brcmstb_l2: registered L2 intc (mem: 0xd400c200, parent irq: 58)
<6>irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xfc40a700, parent IRQ(s): 2)
<6>irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xd400e380, parent IRQ(s): 3)
<6>MCP: Enabling write pairing
<6>Architected cp15 timer(s) running at 27.00MHz (virt).
<6>clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x63a1e71a3, max_idle_ns: 440795203123 ns
<6>sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 4398046511093ns
<6>Switching to timer-based delay loop, resolution 37ns
<6>Console: colour dummy device 80x30
<6>Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00 BogoMIPS (lpj=27000)
<6>pid_max: default: 32768 minimum: 301
<6>Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>CPU: Testing write buffer coherency: ok
<6>CPU0: update cpu_capacity 1024
<6>CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
<6>Setting up static identity map for 0x8440 - 0x8498
<6>CPU1: update cpu_capacity 1024
<6>CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
<6>Brought up 2 CPUs
<6>SMP: Total of 2 processors activated (108.00 BogoMIPS).
<6>CPU: All CPU(s) started in SVC mode.
<6>devtmpfs: initialized
<6>VFP support v0.3: implementor 42 architecture 4 part 00 variant 0 rev 0
<6>clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
<6>NET: Registered protocol family 16
<6>DMA: preallocated 256 KiB pool for atomic coherent allocations
<6>cpuidle: using governor ladder
<6>cpuidle: using governor menu
<6>hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
<6>hw-breakpoint: maximum watchpoint size is 8 bytes.
<6>Broadcom Brahma-B15 readahead cache at: 0xd410e478
<6>vgaarb: loaded
<5>SCSI subsystem initialized
<7>libata version 3.00 loaded.
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<6>media: Linux media interface: v0.10
<6>Linux video capture interface: v2.00
<6>Advanced Linux Sound Architecture Driver Initialized.
<6>Bluetooth: Core ver 2.20
<6>NET: Registered protocol family 31
<6>Bluetooth: HCI device and connection manager initialized
<6>Bluetooth: HCI socket layer initialized
<6>Bluetooth: L2CAP socket layer initialized
<6>Bluetooth: SCO socket layer initialized
<6>Switched to clocksource arch_sys_counter
<5>FS-Cache: Loaded
<4>thermal thermal_zone0: failed to read out thermal zone (-22)
<6>NET: Registered protocol family 2
<6>TCP established hash table entries: 4096 (order: 2, 16384 bytes)
<6>TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
<6>TCP: Hash tables configured (established 4096 bind 4096)
<6>UDP hash table entries: 256 (order: 1, 8192 bytes)
<6>UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
<6>NET: Registered protocol family 1
<6>RPC: Registered named UNIX socket transport module.
<6>RPC: Registered udp transport module.
<6>RPC: Registered tcp transport module.
<6>RPC: Registered tcp NFSv4.1 backchannel transport module.
<7>PCI: CLS 0 bytes, default 64
<4>CPU PMU: Failed to parse /pmu/interrupt-affinity[0]
<6>hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
<6>futex hash table entries: 512 (order: 3, 32768 bytes)
<5>NFS: Registering the id_resolver key type
<5>Key type id_resolver registered
<5>Key type id_legacy registered
<6>nfs4filelayout_init: NFSv4 File Layout Driver Registering...
<6>Installing knfsd (copyright (C) 1996 [email protected]).
<5>FS-Cache: Netfs 'cifs' registered for caching
<5>Key type cifs.spnego registered
<6>fuse init (API version 7.23)
<6>bounce: pool size: 64 pages
<6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
<6>io scheduler noop registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered (default)
<6>brcm-gisb-arb f0400000.gisb-arb: registered mem: d4134000, irqs: 261, 262
<6>brcm-usb-phy f0470200.usb-phy: USB3.0 clock not found in Device Tree
<6>brcmstb-sata-phy f0458100.sata_phy: registered 2 port(s)
<6>brcm-pci f0460000.pcie: adjusting to legacy (broken) pcie DT
<4>brcm-pci f0460000.pcie: cannot get msi intr; MSI disabled
<6>brcm-pci f0460000.pcie: link down
<6>brcm-waketimer f0417580.waketimer: rtc core: registered brcmstb-waketmr as rtc0
<6>brcm-waketimer f0417580.waketimer: registered, with irq 263
<6>Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
<6>console [ttyS0] disabled
<6>f040a900.serial: ttyS0 at MMIO 0xf040a900 (irq = 107, base_baud = 5062500) is a 16550A
<6>console [ttyS0] enabled
<4>of_serial: probe of f040a940.serial failed with error -28
<4>of_serial: probe of f040a980.serial failed with error -28
<6>[drm] Initialized drm 1.1.0 20060810
<6>brd: module loaded
<6>loop: module loaded
<4>brcm-ahci f045a000.sata: masking port_map 0x3 -> 0x3
<6>brcm-ahci f045a000.sata: SSS flag set, parallel bus scan disabled
<6>brcm-ahci f045a000.sata: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
<6>brcm-ahci f045a000.sata: flags: 64bit ncq sntf stag pm clo pmp slum part
<6>scsi host0: brcm-ahci
<6>scsi host1: brcm-ahci
<6>ata1: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x100 irq 91
<6>ata2: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x180 irq 91
<6>brcm-ahci f045a000.sata: Broadcom AHCI SATA3 registered
<6>brcmstb_qspi f03e3400.spi: using bspi-mspi mode
<4>m25p80 spi32766.0: found mx25l6405d, expected m25p80
<6>m25p80 spi32766.0: mx25l6405d (8192 Kbytes)
<5>6 ofpart partitions found on MTD device spi32766.0
<5>Creating 6 MTD partitions on "spi32766.0":
<5>0x000000000000-0x000000200000 : "flash0.bolt"
<5>0x000000200000-0x000000240000 : "flash0.macadr"
<5>0x000000240000-0x000000280000 : "flash0.nvram"
<5>0x000000280000-0x000000300000 : "flash0.devtree"
<5>0x000000300000-0x000000800000 : "flash0.avail0"
<5>0x000000000000-0x000000800000 : "flash0"
<6>libphy: Fixed MDIO Bus: probed
<6>bcmgenet f0b00000.ethernet: GENET 4.5 EPHY: 0x1001
<4>bcmgenet f0b00000.ethernet: failed to get enet-mux clock
<6>libphy: bcmgenet MII bus: probed
<6>usbcore: registered new interface driver r8152
<6>hso: /opt/openpli/sdg10/build/tmp/work-shared/sf4008/kernel-source/drivers/net/usb/hso.c: Option Wireless
<6>usbcore: registered new interface driver hso
<6>usbcore: registered new interface driver cdc_ether
<6>usbcore: registered new interface driver ipheth
<6>xhci-brcm: xHCI BRCM driver
<6>xhci-brcm f0471000.xhci_v2: xHCI Host Controller
<6>xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 1
<6>xhci-brcm f0471000.xhci_v2: hcc params 0x0250f17d hci version 0x100 quirks 0x00010090
<6>xhci-brcm f0471000.xhci_v2: irq 149, io mem 0xf0471000
<6>hub 1-0:1.0: USB hub found
<3>hub 1-0:1.0: config failed, hub doesn't have any ports! (err -19)
<6>xhci-brcm f0471000.xhci_v2: xHCI Host Controller
<6>xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 2
<6>usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 2 ports detected
<6>ehci-brcm: EHCI BRCM driver
<6>ehci-brcm f0470300.ehci_v2: EHCI Host Controller
<6>ehci-brcm f0470300.ehci_v2: new USB bus registered, assigned bus number 3
<6>ehci-brcm f0470300.ehci_v2: irq 145, io mem 0xf0470300
<6>ehci-brcm f0470300.ehci_v2: USB 2.0 started, EHCI 1.00
<6>hub 3-0:1.0: USB hub found
<6>hub 3-0:1.0: 1 port detected
<6>ehci-brcm f0470500.ehci_v2: EHCI Host Controller
<6>ehci-brcm f0470500.ehci_v2: new USB bus registered, assigned bus number 4
<6>ehci-brcm f0470500.ehci_v2: irq 146, io mem 0xf0470500
<6>ehci-brcm f0470500.ehci_v2: USB 2.0 started, EHCI 1.00
<6>hub 4-0:1.0: USB hub found
<6>hub 4-0:1.0: 1 port detected
<6>ohci-brcm: OHCI BRCM driver
<6>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
<6>ohci-brcm f0470400.ohci_v2: BRCM OHCI controller
<6>ohci-brcm f0470400.ohci_v2: new USB bus registered, assigned bus number 5
<6>ohci-brcm f0470400.ohci_v2: irq 147, io mem 0xf0470400
<6>ata1.00: ATA-8: ST9500325AS, 0001SDM1, max UDMA/133
<6>ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
<6>ata1.00: configured for UDMA/133
<5>scsi 0:0:0:0: Direct-Access ATA ST9500325AS SDM1 PQ: 0 ANSI: 5
<6>hub 5-0:1.0: USB hub found
<6>hub 5-0:1.0: 1 port detected
<6>ohci-brcm f0470600.ohci_v2: BRCM OHCI controller
<6>ohci-brcm f0470600.ohci_v2: new USB bus registered, assigned bus number 6
<6>ohci-brcm f0470600.ohci_v2: irq 148, io mem 0xf0470600
<5>sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
<5>sd 0:0:0:0: Attached scsi generic sg0 type 0
<5>sd 0:0:0:0: [sda] Write Protect is off
<7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6> sda: sda1
<5>sd 0:0:0:0: [sda] Attached SCSI disk
<6>hub 6-0:1.0: USB hub found
<6>hub 6-0:1.0: 1 port detected
<6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>ehci-pci: EHCI PCI platform driver
<6>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>ohci-pci: OHCI PCI platform driver
<6>usbcore: registered new interface driver cdc_acm
<6>cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
<6>usbcore: registered new interface driver cdc_wdm
<6>usbcore: registered new interface driver usb-storage
<6>mousedev: PS/2 mouse device common for all mice
<6>usbcore: registered new interface driver appletouch
<6>usbcore: registered new interface driver bcm5974
<6>usbcore: registered new interface driver synaptics_usb
<6>i2c /dev entries driver
<6>brcmstb_thermal f04d1500.thermal: registered AVS TMON of-sensor driver
<6>usbcore: registered new interface driver btusb
<6>sdhci: Secure Digital Host Controller Interface driver
<6>sdhci: Copyright(c) Pierre Ossman
<6>sdhci-pltfm: SDHCI platform and OF driver helper
<6>sdhci-brcmstb f03e0000.sdhci: No vmmc regulator found
<6>sdhci-brcmstb f03e0000.sdhci: No vqmmc regulator found
<6>ata2: SATA link down (SStatus 0 SControl 300)
<6>mmc0: SDHCI controller on f03e0000.sdhci [f03e0000.sdhci] using ADMA
<6>sdhci-brcmstb f03e0200.sdhci: No vmmc regulator found
<6>sdhci-brcmstb f03e0200.sdhci: No vqmmc regulator found
<6>mmc1: SDHCI controller on f03e0200.sdhci [f03e0200.sdhci] using ADMA
<6>hidraw: raw HID events driver (C) Jiri Kosina
<6>usbcore: registered new interface driver usbhid
<6>usb 4-1: new high-speed USB device number 2 using ehci-brcm
<6>usbhid: USB HID core driver
<6>Initializing XFRM netlink socket
<6>NET: Registered protocol family 17
<6>NET: Registered protocol family 15
<5>Key type dns_resolver registered
<5>Registering SWP/SWPB emulation handler
<6>brcm-waketimer f0417580.waketimer: setting system clock to 1970-01-01 00:00:08 UTC (8)
<6>ALSA device list:
<6> No soundcards found.
<6>Waiting for root device /dev/mmcblk0p4...
<6>mmc1: MAN_BKOPS_EN bit is not set
<6>mmc1: new high speed MMC card at address 0001
<6>mmcblk0: mmc1:0001 4FPD3R 3.64 GiB
<6>mmcblk0boot0: mmc1:0001 4FPD3R partition 1 4.00 MiB
<6>mmcblk0boot1: mmc1:0001 4FPD3R partition 2 4.00 MiB
<6>hub 4-1:1.0: USB hub found
<6>hub 4-1:1.0: 4 ports detected
<6>mmcblk0rpmb: mmc1:0001 4FPD3R partition 3 512 KiB
<6> mmcblk0: p1 p2 p3 p4
<6>EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: (null)
<6>VFS: Mounted root (ext4 filesystem) on device 179:4.
<6>devtmpfs: mounted
<6>Freeing unused kernel memory: 296K (c08c4000 - c090e000)
<6>DVB: registering new adapter (sf4008)
<6>platform sf4008.0: DVB: registering adapter 0 frontend 0 (Si21662)...
<6>platform sf4008.0: DVB: registering adapter 0 frontend 1 (Si21662)...
<6>input: dreambox remote control (native) as /devices/virtual/input/input0
<30>udevd[895]: starting version 3.2.10
<5>random: udevd urandom read with 119 bits of entropy available
<30>udevd[896]: starting eudev-3.2.10
<5>random: nonblocking pool is initialized
<6>EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
<6>EXT4-fs (mmcblk0p4): re-mounted. Opts: (null)
<6>f0b00000.etherne:01: Broadcom BCM7439 (2) PHY revision: 0x10, patch: 1
<6>bcmgenet f0b00000.ethernet: configuring instance for internal PHY
<6>bcmgenet f0b00000.ethernet eth0: Link is Down
<6>bcmgenet f0b00000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
<6>NET: Registered protocol family 10
<4>UDF-fs: warning (device mmcblk0p1): udf_fill_super: No partition found (2)
<4>UDF-fs: warning (device mmcblk0p3): udf_fill_super: No partition found (2)

αν γίνεται στείλτε μου το 10 με τις τελευταιες ενημερωσεις μήπως ετσι δουλέψει.OCTAGON SF 4008

[Irte180]

Ολα ΟΚ.ευχαριστώ για τη γρήγορη ανταπόκριση.