I have problems with new rtl_tcp-pcm executable.
It handles properly the -H and -I parameters, that's correct.
But I have corrupted sound, like the noise when you tune to an empty FM frequency.
The data on log is correct, the only problem is noise instead of audio.
Code:
dab-sdgradio by SatDreamGr based on dab-cmdline examples
opt = C 8A
opt = W 30
opt = p -2
opt = G 3
opt = H 192.168.0.16
opt = I 1234
setting the rate to 2048000
setting the frequency to 195936000
setting the gain to 3
ensemble MF2 is (EFFD) recognized
MELODIA FM (EFF9) is part of the ensemble
{"ps":"MELODIA FM "}
MELODIA FM (EFF9) selected as default program
{"programName":"MELODIA FM ","programId":"EFF9"}
KISS FM DIGITAL (EFF6) is part of the ensemble
{"programName":"KISS FM DIGITAL ","programId":"EFF6"}
Cadena100 (EFF8) is part of the ensemble
{"programName":"Cadena100 ","programId":"EFF8"}
SER Digital (EFF4) is part of the ensemble
{"programName":"SER Digital ","programId":"EFF4"}
Onda Cero Radio (EFF5) is part of the ensemble
{"programName":"Onda Cero Radio ","programId":"EFF5"}
RADIO MARIA (EFF7) is part of the ensemble
{"programName":"RADIO MARIA ","programId":"EFF7"}
{"snr":"2","synced":"on","offset":"0"}
DAB+ R MARIA (EFED) is part of the ensemble
{"programName":"DAB+ R MARIA ","programId":"EFED"}
{"snr":"5","synced":"on","offset":"1"}
{"snr":"8","synced":"on","offset":"2"}
{"fic_quality":"100"}
{"snr":"10","synced":"on","offset":"3"}
There might be a DAB signal here
going to start program MELODIA FM
listener is running
{"snr":"12","synced":"on","offset":"3"}
protection handler is uep_protection
we have now DAB
startaddress = 0
length = 116
subChId = 1
protection = 3
bitrate = 160
{"length":"116","bitrate":"160","protectionLevel":"UEP 3","dabType":"DAB","language":" ","programType":"None"}
{"snr":"15","synced":"on","offset":"4"}
{"snr":"17","synced":"on","offset":"4"}
{"msc_quality":"100 0 0"}
If I try server and client on the same box (SF8008) sometimes it's OK and sometimes is wrong, but if I try it using 2 boxes, ET10000 (rtl_tcp server) and SF8008 (Client), I just get noise all times.
I have thought that maybe the ET10000 wasn't a proper TCP server (it should be strange, it needs less than 1% of CPU) , but then I open DAB Player or Welle.io on windows in TCP mode, and I get data (& sound) perfectly.
Has it changed anything, apart from the -H and -I parameter detection ??