I didn't have tried the RTLSDR enigma plugin since I updated to 8 version, and I see it doesn't work for DAB signals. It works fine for FM.
As I can't make it work from GUI, I've tried command line, but same results.
But surprisingly, playing on computer using RTL TCP works fine.
Any ideas of what's happening ??
pcm and non-pcm version
Code:
root@sf8008:~# dab-rtlsdr-sdgradio-pcm -C 8A -W30 -p -2 -G 7.7 | gst-launch-1.0 fdsrc ! audio/x-raw, format=S16LE, channels=2, layout=interleaved, rate=48000 ! dvbaudiosink
dab-sdgradio by SatDreamGr based on dab-cmdline examples
opt = C 8A
opt = W 30
opt = p -2
opt = G 7.7
going for rtlsdr 195936000 7
OK, functions seem to be loaded
Setting pipeline to PAUSED ...
Pipeline is PREROLLED ...
Setting pipeline to PLAYING ...
New clock: GstSystemClock
Found Rafael Micro R820T tuner
[R82XX] PLL not locked!
samplerate set to 2048000
Supported gain values (29): 0.0 0.9 1.4 2.7 3.7 7.7 8.7 12.5 14.4 15.7 16.6 19.7 20.7 22.9 25.4 28.0 29.7 32.8 33.8 36.4 37.2 38.6 40.2 42.1 43.4 43.9 44.5 48.0 49.6
ofdm word gestart
working on rtl_tcp on 3 frequencies....
Code:
root@sf8008:~# rtl_tcp -a 192.168.0.14 -p 1234 -g 7.7
Found 1 device(s):
0: Realtek, RTL2838UHIDIR, SN: 00000001
Using device 0: Generic RTL2832U OEM
Found Rafael Micro R820T tuner
[R82XX] PLL not locked!
Tuned to 100000000 Hz.
Tuner gain set to 7.700000 dB.
listening...
Use the device argument 'rtl_tcp=192.168.0.14:1234' in OsmoSDR (gr-osmosdr) source
to receive samples in GRC and control rtl_tcp parameters (frequency, gain, ...).
client accepted! 192.168.0.2 58890
set sample rate 2048000
set freq 195936000
set freq 209936000
set freq 218640000
set freq 195936000
comm recv bye
worker socket bye
Signal caught, exiting!