Results 1 to 3 of 3

Thread: Edision Os Mio 4k usb εξωτερικός σκληρός πρόβλημα

  1. #1
    luis67's Avatar
    Join Date
    Nov 2013
    Posts
    101
    Total Downloaded
    305.9 KB
    Rep Power
    19

    Exclamation Edision Os Mio 4k usb εξωτερικός σκληρός πρόβλημα

    Εχω εγκαταστήσει το satdreamgr v8.Θελω να προσαρτήσω ενα usb σκληρό δίσκο western digital για να βλεπω τις ταινίες που έχω εκεί.Τον έχω κάνει mount οπως φαίνεται στην παρακάτω εικόνα

    [Only registered and activated users can see links. ]

    Στο παλαιότερο image satdreamgr v6 εκτελώντας την εντολή opkg install ntfs-3g από telnet αναγνώριζε τον δίσκο κανονικά,τώρα στο νέο image satdreamgr v8 εκτελώντας την ίδια εντολή δεν τον αναγνωρίζει.

    [Only registered and activated users can see links. ]

    Log διάγνωσης

    Broadcom Brahma-B15 readahead cache at: 0x(ptrval)
    SCSI subsystem initialized
    libata version 3.00 loaded.
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    videodev: Linux video capture interface: v2.00
    Advanced Linux Sound Architecture Driver Initialized.
    Bluetooth: Core ver 2.22
    NET: Registered protocol family 31
    Bluetooth: HCI device and connection manager initialized
    Bluetooth: HCI socket layer initialized
    Bluetooth: L2CAP socket layer initialized
    Bluetooth: SCO socket layer initialized
    clocksource: Switched to clocksource arch_sys_counter
    FS-Cache: Loaded
    NET: Registered protocol family 2
    tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
    TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear)
    TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear)
    TCP: Hash tables configured (established 2048 bind 2048)
    UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
    UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
    NET: Registered protocol family 1
    RPC: Registered named UNIX socket transport module.
    RPC: Registered udp transport module.
    RPC: Registered tcp transport module.
    RPC: Registered tcp NFSv4.1 backchannel transport module.
    PCI: CLS 0 bytes, default 64
    Initialise system trusted keyrings
    workingset: timestamp_bits=30 max_order=19 bucket_order=0
    FS-Cache: Netfs 'nfs' registered for caching
    NFS: Registering the id_resolver key type
    Key type id_resolver registered
    Key type id_legacy registered
    nfs4filelayout_init: NFSv4 File Layout Driver Registering...
    Installing knfsd (copyright (C) 1996 [Only registered and activated users can see links. ]).
    FS-Cache: Netfs 'cifs' registered for caching
    Key type cifs.spnego registered
    Key type cifs.idmap registered
    fuse: init (API version 7.31)
    NET: Registered protocol family 38
    Key type asymmetric registered
    Asymmetric key parser 'x509' registered
    bounce: pool size: 64 pages
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
    io scheduler mq-deadline registered
    io scheduler kyber registered
    io scheduler bfq registered
    brcm-gisb-arb f0400000.gisb-arb: registered irqs: 265, 266
    brcm-sata-phy f0b10100.sata_phy: registered 1 port(s)
    brcm-pcie f0460000.pcie: host bridge /pcie@f0460000 ranges:
    brcm-pcie f0460000.pcie: No bus range found for /pcie@f0460000, using [bus 00- ff]
    brcm-pcie f0460000.pcie: MEM 0x00c0000000..0x00dfffffff -> 0x00c0000000
    brcm-pcie f0460000.pcie: IB MEM 0x0000000000..0x007fffffff -> 0x0000000000
    brcm-pcie f0460000.pcie: link up, 2.5 GT/s x1 (!SSC)
    brcm-pcie f0460000.pcie: PCI host bridge to bus 0000:00
    pci_bus 0000:00: root bus resource [bus 00-ff]
    pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
    pci 0000:00:00.0: [14e4:7260] type 01 class 0x060400
    pci 0000:00:00.0: PME# supported from D0 D3hot
    PCI: bus0: Fast back to back transfers disabled
    pci 0000:01:00.0: [168c:003e] type 00 class 0x028000
    pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
    pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
    PCI: bus1: Fast back to back transfers disabled
    pci 0000:00:00.0: BAR 8: assigned [mem 0xc0000000-0xc01fffff]
    pci 0000:01:00.0: BAR 0: assigned [mem 0xc0000000-0xc01fffff 64bit]
    pci 0000:00:00.0: PCI bridge to [bus 01]
    pci 0000:00:00.0: bridge window [mem 0xc0000000-0xc01fffff]
    pcieport 0000:00:00.0: enabling device (0140 -> 0142)
    pcieport 0000:00:00.0: PME: Signaling with IRQ 76
    pcieport 0000:00:00.0: AER: enabled with IRQ 76
    brcmstb-bmem bmem@0: assigned reserved memory node bmem@4c000000
    brcmstb_memc f1102000.memc-ddr: registered
    Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    bcm7271-uart f040d000.serial: BAUD MUX clock found
    f040d000.serial: ttyS1 at MMIO 0xf040d000 (irq = 101, base_baud = 5062500) is a 16550A
    serial serial0: tty port ttyS1 registered
    bcm7271-uart f040c000.serial: BAUD MUX clock found
    f040c000.serial: ttyS0 at MMIO 0xf040c000 (irq = 100, base_baud = 5062500) is a 16550A
    printk: console [ttyS0] enabled
    bcm7271-uart f040e000.serial: BAUD MUX clock found
    f040e000.serial: ttyS2 at MMIO 0xf040e000 (irq = 102, base_baud = 5062500) is a 16550A
    loop: module loaded
    brcm-ahci f0b12000.sata: f0b12000.sata supply ahci not found, using dummy regula tor
    brcm-ahci f0b12000.sata: f0b12000.sata supply phy not found, using dummy regulat or
    platform f0b12000.sata:sata-port@0: f0b12000.sata:sata-port@0 supply target not found, using dummy regulator
    brcm-ahci f0b12000.sata: controller can do ALPM, turning on CAP_ALPM
    brcm-ahci f0b12000.sata: masking port_map 0x1 -> 0x1
    brcm-ahci f0b12000.sata: SSS flag set, parallel bus scan disabled
    brcm-ahci f0b12000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platfor m mode
    brcm-ahci f0b12000.sata: flags: 64bit ncq sntf stag pm clo pmp slum part
    scsi host0: brcm-ahci
    ata1: SATA max UDMA/133 mmio [mem 0xf0b12000-0xf0b1299b] port 0x100 irq 87
    brcm-ahci f0b12000.sata: Broadcom AHCI SATA3 registered
    brcmstb_qspi f0200920.qspi: using bspi-mspi mode
    spi-nor spi0.0: found w25q32, expected m25p80
    spi-nor spi0.0: w25q32 (4096 Kbytes)
    5 fixed-partitions partitions found on MTD device spi0.0
    Creating 5 MTD partitions on "spi0.0":
    0x000000000000-0x000000200000 : "flash0.bolt"
    0x000000200000-0x000000210000 : "flash0.macadr"
    0x000000210000-0x000000220000 : "flash0.nvram"
    0x000000220000-0x000000230000 : "flash0.devtree"
    0x000000000000-0x000000400000 : "flash0"
    brcmstb_qspi f0416000.spi: using mspi mode
    brcmstb_qspi f0416000.spi: IRQ spi_lr_fullness_reached not found
    brcmstb_qspi f0416000.spi: IRQ spi_lr_session_aborted not found
    brcmstb_qspi f0416000.spi: IRQ spi_lr_impatient not found
    brcmstb_qspi f0416000.spi: IRQ spi_lr_session_done not found
    brcmstb_qspi f0416000.spi: IRQ mspi_halted not found
    libphy: Fixed MDIO Bus: probed
    bcmgenet f0480000.ethernet: failed to get enet clock
    bcmgenet f0480000.ethernet: GENET 5.0 EPHY: 0x0000
    bcmgenet f0480000.ethernet: failed to get enet-wol clock
    bcmgenet f0480000.ethernet: failed to get enet-eee clock
    ata1: SATA link down (SStatus 0 SControl 300)
    libphy: bcmgenet MII bus: probed
    unimac-mdio unimac-mdio.0: Broadcom UniMAC MDIO bus
    xhci-brcm: xHCI Broadcom STB driver
    ehci-brcm: EHCI Broadcom STB driver
    ehci-brcm f0b00300.ehci_v2: EHCI Host Controller
    ehci-brcm f0b00300.ehci_v2: new USB bus registered, assigned bus number 1
    ehci-brcm f0b00300.ehci_v2: irq 120, io mem 0xf0b00300
    ehci-brcm f0b00300.ehci_v2: USB 2.0 started, EHCI 1.00
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 1 port detected
    ehci-brcm f0b00500.ehci_v2: EHCI Host Controller
    ehci-brcm f0b00500.ehci_v2: new USB bus registered, assigned bus number 2
    ehci-brcm f0b00500.ehci_v2: irq 123, io mem 0xf0b00500
    ehci-brcm f0b00500.ehci_v2: USB 2.0 started, EHCI 1.00
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 1 port detected
    ohci-brcm: OHCI Broadcom STB driver
    ohci-brcm f0b00400.ohci_v2: Broadcom STB OHCI controller
    ohci-brcm f0b00400.ohci_v2: new USB bus registered, assigned bus number 3
    ohci-brcm f0b00400.ohci_v2: irq 121, io mem 0xf0b00400
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 1 port detected
    ohci-brcm f0b00600.ohci_v2: Broadcom STB OHCI controller
    ohci-brcm f0b00600.ohci_v2: new USB bus registered, assigned bus number 4
    ohci-brcm f0b00600.ohci_v2: irq 124, io mem 0xf0b00600
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 1 port detected
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    usbcore: registered new interface driver uas
    usbcore: registered new interface driver usb-storage
    mousedev: PS/2 mouse device common for all mice
    brcmstb-waketimer f0417680.waketimer: registered as rtc0
    brcmstb-waketimer f0417680.waketimer: registered, with irq 268
    brcmstb-i2c f040a300.i2c: upg_bsca@97500hz registered in interrupt mode
    brcmstb-i2c f0417280.i2c: upg_bscb_aon@390000hz registered in interrupt mode
    brcmstb-i2c f0417300.i2c: upg_bscc_aon@390000hz registered in interrupt mode
    brcmstb-i2c f0417380.i2c: upg_bscd_aon@390000hz registered in interrupt mode
    bcm7038-wdt f040a5a8.watchdog: Registered BCM7038 Watchdog
    usbcore: registered new interface driver btusb
    brcmstb-avs-cpufreq f04c4000.avs-cpu-data-mem: registered
    sdhci: Secure Digital Host Controller Interface driver
    sdhci: Copyright(c) Pierre Ossman
    sdhci-pltfm: SDHCI platform and OF driver helper
    mmc0: SDHCI controller on f0200000.sdhci [f0200000.sdhci] using ADMA
    mmc1: SDHCI controller on f0200200.sdhci [f0200200.sdhci] using ADMA
    hid: raw HID events driver (C) Jiri Kosina
    usbcore: registered new interface driver usbhid
    usbhid: USB HID core driver
    NET: Registered protocol family 10
    Segment Routing with IPv6
    NET: Registered protocol family 17
    Bluetooth: HIDP (Human Interface Emulation) ver 1.2
    Bluetooth: HIDP socket layer initialized
    Key type dns_resolver registered
    Registering SWP/SWPB emulation handler
    Loading compiled-in X.509 certificates
    brcmstb-waketimer f0417680.waketimer: setting system clock to 1970-01-01T00:00:1 2 UTC (12)
    ALSA device list:
    No soundcards found.
    Waiting for root device /dev/mmcblk1p3...
    mmc1: new high speed MMC card at address 0001
    mmcblk1: mmc1:0001 8GTF4R 7.28 GiB
    mmcblk1boot0: mmc1:0001 8GTF4R partition 1 4.00 MiB
    mmcblk1boot1: mmc1:0001 8GTF4R partition 2 4.00 MiB
    mmcblk1rpmb: mmc1:0001 8GTF4R partition 3 512 KiB, chardev (249:0)
    Alternate GPT is invalid, using primary GPT.
    mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8 p9
    EXT4-fs (mmcblk1p3): mounted filesystem with ordered data mode. Opts: (null)
    VFS: Mounted root (ext4 filesystem) readonly on device 179:3.
    devtmpfs: mounted
    Freeing unused kernel memory: 2048K
    Run /sbin/init as init process
    random: fast init done
    usb 1-1: new high-speed USB device number 2 using ehci-brcm
    usb-storage 1-1:1.0: USB Mass Storage device detected
    scsi host1: usb-storage 1-1:1.0
    avl6261: loading out-of-tree module taints kernel.
    avl6261: module license 'Proprietary' taints kernel.
    Disabling lock debugging due to kernel taint
    scsi 1:0:0:0: Direct-Access WD Elements 1042 1025 PQ: 0 ANSI: 6
    sd 1:0:0:0: Attached scsi generic sg0 type 0
    sd 1:0:0:0: [sda] Spinning up disk...
    dvbdev: DVB: registering new adapter (Broadcom BCM7xxx)
    input: dreambox advanced remote control (native) as /devices/virtual/misc/brcmst b/input0
    input: dreambox ir mouse as /devices/virtual/misc/brcmstb/input1
    input: dreambox front panel as /devices/virtual/misc/brcmstb/input2
    ..
    avl6261: Firmware Version 1.2.27131 (1.8.18)
    misc brcmstb: DVB: registering adapter 0 frontend 0 (Availink AVL6261)...
    avl6862: Firmware Version 2.0.26674 (2.19.23)
    misc brcmstb: DVB: registering adapter 0 frontend 1 (Availink AVL6762)...
    .
    Bluetooth: HCI UART driver ver 2.3
    Bluetooth: HCI UART protocol H4 registered
    Bluetooth: HCI UART protocol BCSP registered
    Bluetooth: HCI UART protocol Three-wire (H5) registered
    Bluetooth: HCI UART protocol QCA registered
    Bluetooth: hci0: ROME setup
    Bluetooth: hci0: Frame reassembly failed (-84)
    .
    Bluetooth: hci0: QCA controller version 0x00440302
    Bluetooth: hci0: QCA Downloading qca/rampatch_00440302.bin
    bluetooth hci0: Direct firmware load for qca/rampatch_00440302.bin failed with e rror -2
    Bluetooth: hci0: QCA Failed to request file: qca/rampatch_00440302.bin (-2)
    Bluetooth: hci0: QCA Failed to download patch (-2)
    ...ready
    sd 1:0:0:0: [sda] 1953519616 512-byte logical blocks: (1.00 TB/932 GiB)
    sd 1:0:0:0: [sda] Write Protect is off
    sd 1:0:0:0: [sda] Mode Sense: 47 00 10 08
    sd 1:0:0:0: [sda] No Caching mode page found
    sd 1:0:0:0: [sda] Assuming drive cache: write through
    sda: sda1
    sd 1:0:0:0: [sda] Attached SCSI disk
    cfg80211: Loading compiled-in X.509 certificates for regulatory database
    cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
    wlan: loading driver v4.5.25.38
    hif_pci_probe:, con_mode= 0x0
    PCI device id is 003e :003e
    hif_pci 0000:01:00.0: enabling device (0140 -> 0142)

    hif_pci_configure : num_desired MSI set to 0

    Using PCI Legacy Interrupt
    hif_pci_probe: ramdump base 0x(ptrval) size 2095136
    ol_download_firmware: chip_id:0x5030000 board_id:0x0
    Board extended Data download address: 0x0
    __ol_transfer_bin_file: Loading setup file athsetup.bin
    hif_pci 0000:01:00.0: Direct firmware load for athsetup.bin failed with error -2
    __ol_transfer_bin_file: Failed to get athsetup.bin:-2
    HTT: full reorder offload enabled
    hif_pci 0000:01:00.0: Direct firmware load for wlan/wlan_mac.bin failed with err or -2
    Pkt log is disabled
    target uses HTT version 3.27; host uses 3.28
    *** Warning: host/target HTT versions are different, though compatible!
    Host SW:4.5.25.38, FW:2.0.0.187, HW:QCA6174_REV3_2
    ENTER sme_set_btc_coex_dutycycle = 30
    ENTER sme_set_btc_coex_dutycycle =30
    wlan: driver loaded in 1361000
    EXT4-fs (mmcblk1p3): re-mounted. Opts: (null)
    random: dd: uninitialized urandom read (512 bytes read)
    random: crng init done
    IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    dvb_demux: dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
    Last edited by luis67; 30-03-20 at 23:50.

  2. #2

    georgeflu's Avatar
    Join Date
    Jan 2011
    Location
    ptolemaida
    Age
    40
    Posts
    11,593
    Total Downloaded
    23.77 MB
    Rep Power
    1280029

    Re: Edision Os Mio 4k usb εξωτερικός σκληρός πρόβλημα

    δοκιμασε μια την πιο κατω εντολη, για να σου ερθουν καποιες αλλαγες που εχουν γινει, και μετα ξανδοκιμασε...

    Code:
    opkg update
    opkg install --force-reinstall base-files
    ολα ειναι FLU

    Member SatDreamGr Projects

  3. #3
    luis67's Avatar
    Join Date
    Nov 2013
    Posts
    101
    Total Downloaded
    305.9 KB
    Rep Power
    19

    Thumbs up Απ: Re: Edision Os Mio 4k usb εξωτερικός σκληρός πρόβλημα

    SDG
    Quote Originally Posted by georgeflu View Post
    δοκιμασε μια την πιο κατω εντολη, για να σου ερθουν καποιες αλλαγες που εχουν γινει, και μετα ξανδοκιμασε...

    Code:
    opkg update
    opkg install --force-reinstall base-files
    Σας ευχαριστώ για την άμεση απάντηση.Λειτουργεί άψογα.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Edision os mio 4k προσαρτηση nas
    By th3m1s in forum Περί Edision Enigma 2
    Replies: 2
    Last Post: 05-06-19, 21:04
  2. Edision OS MIO 4K
    By johnw in forum General Forum Edision Receivers
    Replies: 0
    Last Post: 13-12-18, 13:30

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •