What will change, compared to version 6 ?
What will change, compared to version 6 ?
Lower Dishes: 53/52'5/52 - 45 - 42 - 39 - 28'2 - 26/25'5 - 23'5 - 19'2 - 13 - 9 - 7 - 3 - East <------> West - 1 - 27'5 - 30
Upper Dishes: 36 - 30'5 - 21'6 - 16 - 10 - 4'8 - East <------> West - 4/5 - 7/8 - 12'5 - 15
Diseqc switches
Xtrend ET 10000 -- Octagon SF8008 4K TWIN S2X -- DM7020 HD (CardServer)
Newer OE Zeus...
That will make few things easier when you need to support latest stuff.
On the other hand, supporting old stuff is a nightmare (closed cams, closed plugins, old receivers with small flash-128MB).
Member SatDreamGr Projects
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
OK. Thank's.
I see just one folder for Edision. I supose others will follow....
Lower Dishes: 53/52'5/52 - 45 - 42 - 39 - 28'2 - 26/25'5 - 23'5 - 19'2 - 13 - 9 - 7 - 3 - East <------> West - 1 - 27'5 - 30
Upper Dishes: 36 - 30'5 - 21'6 - 16 - 10 - 4'8 - East <------> West - 4/5 - 7/8 - 12'5 - 15
Diseqc switches
Xtrend ET 10000 -- Octagon SF8008 4K TWIN S2X -- DM7020 HD (CardServer)
It was much easier to build Edision first, almost required no kernel patches. Although if you take a closer look no images released on public yet.
All other boxes due to older kernel require few kernel patches.
Octagon patched for build and VU 4K patched as well. So I can add few more empties on the list :)
Not able to build webkit hbbtv (it fails).
Not able to build qt (again it fails).
Not able to build old closed cams (it fails with missing openssl dependencies).
Member SatDreamGr Projects
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
Are Old Cams really needed ?
Oscam does everything.... I think.
When do you think it will appear first images ?
Lower Dishes: 53/52'5/52 - 45 - 42 - 39 - 28'2 - 26/25'5 - 23'5 - 19'2 - 13 - 9 - 7 - 3 - East <------> West - 1 - 27'5 - 30
Upper Dishes: 36 - 30'5 - 21'6 - 16 - 10 - 4'8 - East <------> West - 4/5 - 7/8 - 12'5 - 15
Diseqc switches
Xtrend ET 10000 -- Octagon SF8008 4K TWIN S2X -- DM7020 HD (CardServer)
speaking of old cams, I heard that 3c 2.3.8 supports new arm processors, so it could be kept between softcam plugins
i have the same opinion, but there are a lot of user who asking for them. (in any case, if there will be not a solution, they have to "learn" about oscam)
for the moment, the problem isn't the processor support, most of them are already working. the problem is uncompatibility in newest software.
ολα ειναι FLU
Member SatDreamGr Projects
Hi korn, and you can have the new image v.8 for the
xtrend 10000, waiting for the info, I salute you and a good job
Hi team waiting for new image v.8 for the
vu+uno good job
I can not download New SatDreamGr 8 images here ?
There are currently 1 users browsing this thread. (0 members and 1 guests)