octagon sf8008 4k plugins.RemoteStreamConverter

[satmario1]

Please help
Install your image satdreamgr 6 for my octagon sf8008 4k.
Everything works without problems.
I cannot install the plugins.RemoteStreamConverter.
Try a lot of image
Image VTI plugins RemoteStreamConverter not problems
Image openatv plugins RemoteStreamConverter not problems
Image openeight plugins RemoteStreamConverter not problems
Image satdreamgr plugins remote problems instal.
offer plugins to install do not include a plugin RemoteStreamConverter .
Attempt to install the ipk package errors.
######################
root@sf8008:~# opkg install /media/usb/enigma2-plugin-extensions-remotestreamco
vert_2.0+git3+4656143-r0_mipsel.ipk
Not selecting enigma2-plugin-extensions-remotestreamconvert 2.0+git3+4656143 du
to incompatible architecture.
Unknown package 'enigma2-plugin-extensions-remotestreamconvert'.
Collected errors:
* opkg_solver_install: Cannot install package enigma2-plugin-extensions-remote
treamconvert.
root@sf8008:~#
#######################
Thank you very much for your help.
Please excuse my English language
My mother tongue is Czech

[georgeflu]

is there vti for sf8008???
and the above working installations, are in sf8008 ???
because you are trying to install a "mipsel" file, to an "arm" receiver...so the file architecture is wrong.

also, try to install it direct from the image feed, and not your usb stick

opkg update
opkg install enigma2-plugin-extensions-remotestreamconvert

[satmario1]

The ipk file architecture is designed for both arm and mipsel
my ipk file remotestreamconverter works in both arm and mipsel
only in satdreamgr image cannot be installed
Yes, there is a compiled sentence for octagon

[satmario1]

is there vti for sf8008???
and the above working installations, are in sf8008 ???
because you are trying to install a "mipsel" file, to an "arm" receiver...so the file architecture is wrong.

also, try to install it direct from the image feed, and not your usb stick

opkg update
opkg install enigma2-plugin-extensions-remotestreamconvert

################
root@sf8008:~# opkg update
Downloading http://188.165.252.42/feeds/satdream...ll/Packages.gz.
Updated source 'satdreamgr-all'.
Downloading http://188.165.252.42/feeds/satdream...on/Packages.gz.
Updated source 'satdreamgr-armv7ahf-neon'.
Downloading http://188.165.252.42/feeds/picons/Packages.gz.
Updated source 'picons'.
Downloading http://188.165.252.42/feeds/satdream...-neon/Packages
gz.
Updated source 'satdreamgr-extra-armv7ahf-neon'.
Downloading http://188.165.252.42/feeds/satdream...ra/Packages.gz.
Updated source 'satdreamgr-extra'.
Downloading http://188.165.252.42/feeds/satdream...08/Packages.gz.
Updated source 'satdreamgr-extra-sf8008'.
Downloading http://188.165.252.42/feeds/satdream...08/Packages.gz.
Updated source 'satdreamgr-sf8008'.
root@sf8008:~# opkg install enigma2-plugin-extensions-remotestreamconvert
Collected errors:
* opkg_prepare_url_for_install: Couldn't find anything to satisfy 'enigma2-plu
in-extensions-remotestreamconvert'.
root@sf8008:~#

[georgeflu]

is there any special reason that you need your file, and not the one from the feed?

if yes, than "break" the .ipk file (you can do it using 7zip) and transfer by ftp the including file...

now about the installation. if your file is both for arm and mipsel, than the file should be an " all.ipk" and not .mipsel (and even this is wrong, it could be mips32el for o.e 20 images). there is a "control" in the files that are installed, to avoid problems. if other images has "passed" this control, than this is the "something wrong" and dangerus for the receiver.

[satmario1]

is there vti for sf8008???
and the above working installations, are in sf8008 ???
because you are trying to install a "mipsel" file, to an "arm" receiver...so the file architecture is wrong.

also, try to install it direct from the image feed, and not your usb stick

opkg update
opkg install enigma2-plugin-extensions-remotestreamconvert

georgeflu

it has been a long time to test the image of VTI
It was compiled on the Russian forum
I always use only openpli and your image is the same as openpli
backupsuite works100%
hbbtv works super
kodi17,6 super
very good job
thank the author image

The picture from the Germans worked well
http://openeight.de/
############

georgeflu
I don't know if I answer clearly.
your information doesn't work as I showed
opkg aktualizace
opkg install enigma2-plugin-extensions-remotestreamconvert

plugin remotestreamconvert does not exist in your feed

so I am looking for a workaround.
I greatly appreciate your willingness to help my problem

[satmario1]

is there any special reason that you need your file, and not the one from the feed?

if yes, than "break" the .ipk file (you can do it using 7zip) and transfer by ftp the including file...

now about the installation. if your file is both for arm and mipsel, than the file should be an " all.ipk" and not .mipsel (and even this is wrong, it could be mips32el for o.e 20 images). there is a "control" in the files that are installed, to avoid problems. if other images has "passed" this control, than this is the "something wrong" and dangerus for the receiver.

there is no reason I can use another file
I just need a remotestreamconverter file that will work
I have no source to download this file
can you please help?

[georgeflu]

for a while, i was searching for the file, (and also what the file i doing, as i do not have use it).

finaly, it works the receivers channel, to another receiver (correct?) .

try to do it using menu/setu/ tuner setup / remote tuner (or fallback tuner) .

[satmario1]

for a while, i was searching for the file, (and also what the file i doing, as i do not have use it).

finaly, it works the receivers channel, to another receiver (correct?) .

try to do it using menu/setu/ tuner setup / remote tuner (or fallback tuner) .

I found this variant but nowhere is how to use it.
There are many complex settings.
There is no manual anywhere on the Internet
I'm using an over-the-air stream.
I don't stream home network.
That's why I use the tried and tested remotestreamconverter plugin

[georgeflu]

upload somewhere your file to check it...