Results 1 to 3 of 3

Thread: MIO+ 4K

  1. #1

    Question MIO+ 4K

    1; if range AVL6862:
    Code:
    Device: /dev/dvb/adapter0/frontend1
    
    Basic capabilities:
        Name: "Availink AVL6862"
        Frontend-type:       QPSK (DVB-S)
        Frequency (min):     43.000 MHz
        Frequency (max):     2150.000 MHz
        Frequency stepsiz:   0.166 MHz
        Frequency tolerance: 5.000 MHz
        Symbol rate (min):     0.000000 MSym/s
        Symbol rate (max):     55.000000 MSym/s
        Symbol rate tolerance: 0 ppm
        Notifier delay: 0 ms
        Frontend capabilities:
            auto inversion
            FEC 1/2
            FEC 2/3
            FEC 3/4
            FEC 4/5
            FEC 5/6
            FEC 6/7
            FEC 7/8
            FEC 8/9
            FEC AUTO
            QPSK
            QAM 16
            QAM 32
            QAM 64
            QAM 128
            QAM 256
            QAM AUTO
            auto transmission mode
            auto guard interval
            auto hierarchy
            FE_CAN_2G_MODULATION
            FE_CAN_RECOVER
    
    Current parameters:
        Frequency:  0.000 MHz
        Inversion:  OFF
        Symbol rate:  0.000000 MSym/s
        FEC:  FEC AUTO
    maybe update start blindscan from 10450 ? or lower


    2; in boot write:
    Code:
    Board: OSMIO4KPLUS
    SYS_CTRL: product=72604, family=7260a0, strap=000001d9,00000011
    otp @ 0xf0404030 = 0x000000e0: en_cr(0x00000060) en_testport(0x00000080) 
    otp @ 0xf0404034 = 0x00804000: macrovision_disable(0x00800000) mtsif_enc_ctl_disable(0x00004000) 
    RESET CAUSE: 0x000200 software_master (1 of 24 possible causes)
    CS0: SFDP SPI, 4MB, 64kB blocks, 64kB erase block, 256B pages
    RTS0: 0x21101004, 256 clients, ok
    BOX MODE: 1
    CPU: 2x B53 (64-bit) [420f1000] 1503 MHz
    SCB: 388 MHz
    SYSIF: 1002 MHz
    DDR0 @ 1200MHz
    SPLASH: starting
    SPLASH BMEM init @ 80000000
    SPLASH: Old format file in flash. Use splash_create_flash_file to create newer format.
    Loaded BMP: W=720 H=576
    SPLASH: audio not present
    AVS: park check
    AVS: temperature monitoring enabled
    AVS: STB: V=0.998V, T=+66.218C, PV=0.847V, MV=0.996V, FW=30343978 [0.4.9.x]
    AVS: CPU: V=0.998V, T=+66.218C, PV=0.802V, MV=0.996V
    
    usb: resetting device on bus 0 hub 1 port 1
    
    
    USB: New high speed device connected to bus 0 hub 1 port 1
    
    usb: found Mass-Storage Device 0457:0151
    
    USBMASS: Unit 0 connected
    
    SPLASH: Old format file in flash. Use splash_create_flash_file to create newer format.
    Executing STARTUP...
    Loader:zimg Filesys:raw Dev:emmcflash0.kernel2 File:(null) Options:root=/dev/mmcblk1p5 rootfstype=ext4 rootwait
    Reading up to 33554432 bytes from Image....
    Starting program at 0x80000 (DTB @ 0x7628000)
    maybe fixed SPLASH ?
    Mutant HD51 , OSmio+ 4K , Dreambox 900UHD/7020HD/500HD , iNEOS ZX4 , TBS-5925 , TBS-5880 , TBS-5220
    WaveFrontier T90 /39E-36E-31E-28E-26E-23E-19E-16E-13E-9E-7E-5E-1W-4W/
    Gibertini OP100L /90E-53W/
    ROVER AtomLight STC+

  2. #2

    Re: MIO+ 4K

    3; not show weather icons
    Mutant HD51 , OSmio+ 4K , Dreambox 900UHD/7020HD/500HD , iNEOS ZX4 , TBS-5925 , TBS-5880 , TBS-5220
    WaveFrontier T90 /39E-36E-31E-28E-26E-23E-19E-16E-13E-9E-7E-5E-1W-4W/
    Gibertini OP100L /90E-53W/
    ROVER AtomLight STC+

  3. #3

    jpuigs's Avatar
    Join Date
    Dec 2017
    Location
    Barcelona
    Age
    50
    Posts
    255
    Rep Power
    68921

    Re: MIO+ 4K

    Quote Originally Posted by EnoSat View Post
    1; if range AVL6862:
    Code:
    Device: /dev/dvb/adapter0/frontend1
    
    Basic capabilities:
        Name: "Availink AVL6862"
        Frontend-type:       QPSK (DVB-S)
        Frequency (min):     43.000 MHz
        Frequency (max):     2150.000 MHz
        Frequency stepsiz:   0.166 MHz
        Frequency tolerance: 5.000 MHz
        Symbol rate (min):     0.000000 MSym/s
        Symbol rate (max):     55.000000 MSym/s
        Symbol rate tolerance: 0 ppm
    maybe update start blindscan from 10450 ? or lower
    I supose it's the combined S2-T-C (B) Tuner.
    It may say 43 MHz, because it's the starting freq. for VHF Band I when working in DVB-T or C modes.
    When I tested it some months ago, it even said FE_CAN_MULTISTREAM, and multistream is not working on B tuner. Athoik gave us some info.
    Look at post #14 https://www.satdreamgr.com/forum/sho...l=1#post130192
    Lower Dishes: 53/52'5/52 - 45 - 42 - 39 - 28'2 - 26/25'5 - 23'5 - 19'2 - 13 - 9 - 7 - 3 - East <------> West - 1 - 27'5 - 30
    Upper Dishes: 36 - 30'5 - 21'6 - 16 - 10 - 4'8 - East <------> West - 4/5 - 7/8 - 12'5 - 15
    Diseqc switches

    Xtrend ET 10000 -- Octagon SF8008 4K TWIN S2X -- DM7020 HD (CardServer)

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •