So if I understand correctly, put receiver on blindscan and then execute this 2 command mentioned above ?
and where that output will be located ?
So if I understand correctly, put receiver on blindscan and then execute this 2 command mentioned above ?
and where that output will be located ?
You need to run those commands from telnet. Then run blindscan.
Member SatDreamGr Projects
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
enigma2_crash_1550821879.rar
I hope this help
Do you use custom satellites.xml?
Member SatDreamGr Projects
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
I use Satvenus E2 settings list, Motor 42E 30W
and to be honest dont know which satellites.xml they use
I think error is due to non standard satellites.xml
The command find /etc -name satellites.xml returns one or two results?
Can you upload them, to have a look?
Member SatDreamGr Projects
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
You can also disable the blindscan plugin from using the satellites.xml file(s).
Disable sync with known transponders = yes
Disable remove duplicates = yes
Maybe try another blindscan and change the settings to what is shown above. If it does not crash, you will have a good idea the problem is the satellites.xml file.
vlcsnap-00017.jpg
thanks for suggestion, next time will try that
Ok guys, that seems to be problem founded , like Elbandido suggested new blind scan with 2 disabled rows and no crash occured
so to solve problem probably best thing is another E2 setting list, or just replace satellite.xml ?
if so , which one you suggest ?
Last edited by kamacnik1; 22-02-19 at 23:40.
Just delete the bad satellites.xml file from /root/etc/enigma2/ and then reboot.
It'll load the default original one in /root/etc/tuxbox instead.
My name is Mike
There are currently 1 users browsing this thread. (0 members and 1 guests)