Bootvideo tutorijal by @mika
I see that lately there is enough query to install the bootvideo in the resiver.
Here's the tutorial.
To get started you need bootvideo-sphere-sgs_all.ipk (file attached)
or if you use a satvenus panel, from there you can download directly to the resiver.
Prepare the bootvideo and the 3 mvi files you want to use.
now the real tutorial is moving!
After installing the bootvideo-sphere-sgs_all file, make the reboot of the rescue
(you'll see a change for a resetable resiver).
now we are going to replace the bootvideo and mvi files you have selected.
1. Turn DCC (or whatever you are using).
2 paths usr / share / vuplus-bootlogo
3. open the vuplus-bootlogo folder and just replace the bootvideo and 3 mvi files
Now, another part of the job is going, which is important to see your bootvideo and bootlogo (image)
- usr / share (there are 3 mvi files) that you need to delete and just insert your
backdrop.mvi.
after all this, re-create the reboot reboot, and that's it.
When starting rescue, you will see your selected bootvideo and bootlogo.
I hope that I have helped you with this tutorial enough.
This applies to all enigma2 receivers (not just for woo +).
Here are the attached images for better use