Results 1 to 10 of 10

Thread: Octagon SF4008 SDG 6 images don't work after online update

  1. #1

    jpuigs's Avatar
    Join Date
    Dec 2017
    Location
    Barcelona
    Age
    50
    Posts
    255
    Rep Power
    68921

    Octagon SF4008 SDG 6 images don't work after online update

    I'm trying to install a clean SDGR 6 image (20181006), and it goes OK.
    But when doing an online update, it says 36 packages to be updated, I say OK, and when STB reboots, it doesn't boot.
    "Booting…" stays on front display, and it stops here.

    I've tried using image 20181005, and it happens the same wrong behaviour.


    I can telnet to the box, and if I try to run enigma2....

    Code:
    satdreamgr 6 sf4008
    
    sf4008 login: root
    root@sf4008:~# enigma2
    PYTHONPATH: /usr/lib/enigma2/python
    DVB_API_VERSION 5 DVB_API_VERSION_MINOR 10
    ENIGMA_DEBUG_LVL=3
    [gFBDC] no framebuffer available
    Segmentation fault
    root@sf4008:~#

    Is there anything wrong ?

  2. #2

    athoik's Avatar
    Join Date
    Sep 2012
    Location
    Earth
    Posts
    10,758
    Rep Power
    5927763

    Απ: Octagon SF4008 SDG 6 images don't work after online update

    Maybe due https://github.com/oe-alliance/oe-al...0191f688b9c758

    What drivers installed ?
    Member SatDreamGr Projects

    Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
    Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916

  3. #3

    jpuigs's Avatar
    Join Date
    Dec 2017
    Location
    Barcelona
    Age
    50
    Posts
    255
    Rep Power
    68921

    Re: Octagon SF4008 SDG 6 images don't work after online update

    I have not installed any driver.
    Just a CLEAN installation, config , scan one hot bird frequency, and online update.
    Then it doesn't boot anymore.

    Do you want me to show you an "opkg list-installed" ??

  4. #4

    jpuigs's Avatar
    Join Date
    Dec 2017
    Location
    Barcelona
    Age
    50
    Posts
    255
    Rep Power
    68921

    Re: Octagon SF4008 SDG 6 images don't work after online update

    I have manually done a copy of file /lib/modules/4.1.37/extra/linuxtv.ko which is installed on CLEAN image 20181006.
    Then I do an online update and box doesn't boot, then I replace that file with the backup copy, reboot, and BOX works fine again…

  5. #5

    athoik's Avatar
    Join Date
    Sep 2012
    Location
    Earth
    Posts
    10,758
    Rep Power
    5927763

    Απ: Octagon SF4008 SDG 6 images don't work after online update

    So the commit from OE-A (use older driver's that fix sound) is not compatible.

    I'll remove it.
    Member SatDreamGr Projects

    Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
    Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916

  6. #6

    jpuigs's Avatar
    Join Date
    Dec 2017
    Location
    Barcelona
    Age
    50
    Posts
    255
    Rep Power
    68921

    Re: Octagon SF4008 SDG 6 images don't work after online update

    I've seen that this "problematic" driver, is the one which is being used on Openeight SF4008 current image, and it works there.
    Why doesn't it work on SDG ?

  7. #7

    athoik's Avatar
    Join Date
    Sep 2012
    Location
    Earth
    Posts
    10,758
    Rep Power
    5927763

    Απ: Octagon SF4008 SDG 6 images don't work after online update

    I am not an Oracle..
    Member SatDreamGr Projects

    Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
    Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916

  8. #8

    jpuigs's Avatar
    Join Date
    Dec 2017
    Location
    Barcelona
    Age
    50
    Posts
    255
    Rep Power
    68921

    Re: Octagon SF4008 SDG 6 images don't work after online update

    NO ???
    I though you live in Δελφοί

  9. #9

    athoik's Avatar
    Join Date
    Sep 2012
    Location
    Earth
    Posts
    10,758
    Rep Power
    5927763

    Απ: Octagon SF4008 SDG 6 images don't work after online update

    They build for OE-A, and our image is based on PLi.

    It happened before the OE-A to have completely different kernel config, and drivers failed.

    Back then we syncronize kernel config.

    Now I don't have time to cross-check with OE-A. Feel free to fix and commit the change :)
    Member SatDreamGr Projects

    Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
    Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916

  10. #10

    jpuigs's Avatar
    Join Date
    Dec 2017
    Location
    Barcelona
    Age
    50
    Posts
    255
    Rep Power
    68921

    Re: Octagon SF4008 SDG 6 images don't work after online update

    ok, thanks.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. error online update
    By jpuigs in forum English Section General
    Replies: 12
    Last Post: 30-10-18, 13:16
  2. Online update 2018-03-11 prevent the start of enigma2
    By pr2 in forum English Section General
    Replies: 2
    Last Post: 11-03-18, 11:57
  3. Update online stay on booting...
    By stpierre in forum SF4008
    Replies: 12
    Last Post: 22-01-18, 00:09
  4. NEU: Treiber (Driver) update Octagon SF4008 - 07.09.17
    By sami noor in forum English Section General
    Replies: 0
    Last Post: 08-09-17, 00:36
  5. ET9000 online update
    By Robinson in forum SatDreamGr Images Chat
    Replies: 2
    Last Post: 25-01-17, 12:43

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •