Page 7 of 8 FirstFirst ... 345678 LastLast
Results 61 to 70 of 71

Thread: OTT (DVB-MPE)

  1. #61

    Re: OTT (DVB-MPE)

    Little more slow zapping than 0.7a version...
    Mips executable.

  2. #62

    athoik's Avatar
    Join Date
    Sep 2012
    Location
    Earth
    Posts
    10,758
    Rep Power
    5927763

    Απ: Re: OTT (DVB-MPE)

    Quote Originally Posted by xosef1234 View Post
    Small update:
    Since in every stream the name of the streamed file is given, I added the file name in scan process:

    e.g.
    Code:
    Nr. | PID  | Dest-IP-Address | Port  | Payload Type     | Channel Name                   | File Name                     
    --- | ---- | --------------- | ----- | ---------------- | ------------------------------ | ------------------------------
    1   | 2005 | 224.20.20.12    | 6000  | 33  MP2T      AV |                                | bloombergtveu.ts              
    2   | 2005 | 224.20.20.11    | 6000  | 33  MP2T      AV |                                | euronews.ts                   
    3   | 2005 | 224.20.20.9     | 6000  | 33  MP2T      AV |                                | fashiontvr.ts
    https://mega.nz/#!t1xygKbC!FdMbsIBku...qYPGSqWhmy2U0Y
    Thanks for the new update. I guess change is only for "-s" parameter right?


    Please note that if somebody tries to watch live TV for few hours it will get a nice OOM.

    Code:
    Out of memory: Kill process 2174 (dvb-ip-mpe2ts) score 377 or sacrifice child
    That happens because there are few memory leaks on the program. I fix some issues reported by valgrind here: https://github.com/satdreamgr/eti-to...78c6470b04a155

    Few more left, I guess those are leaks only on "-s" parameter.

    Code:
    $ cppcheck dvb-ip-mpe2ts.c
    Checking dvb-ip-mpe2ts.c ...
    [dvb-ip-mpe2ts.c:778]: (error) Memory leak: temp_port_str
    [dvb-ip-mpe2ts.c:778]: (error) Memory leak: temp_str
    Member SatDreamGr Projects

    Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
    Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916

  3. #63

    Re: OTT (DVB-MPE)

    I guess change is only for "-s" parameter right?
    Yes, I didn't change the extractor section.

    For the rest, thanks a lot, also to valgrind. Always good to learn new things.

  4. #64

    Re: OTT (DVB-MPE)

    Mutant HD51 , OSmio+ 4K , Dreambox 900UHD/7020HD/500HD , iNEOS ZX4 , TBS-5925 , TBS-5880 , TBS-5220
    WaveFrontier T90 /39E-36E-31E-28E-26E-23E-19E-16E-13E-9E-7E-5E-1W-4W/
    Gibertini OP100L /90E-53W/
    ROVER AtomLight STC+

  5. #65

    athoik's Avatar
    Join Date
    Sep 2012
    Location
    Earth
    Posts
    10,758
    Rep Power
    5927763

    Απ: OTT (DVB-MPE)

    It's included on our images, install using opkg install tsduck.
    Member SatDreamGr Projects

    Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
    Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916

  6. #66

    Re: Απ: OTT (DVB-MPE)

    hi every body...
    any news channels added? or still the same?
    thanks to all team for the great support and brutal image!!!

  7. #67

    Re: Απ: OTT (DVB-MPE)

    No more MPE on 12577? Can anyone confirm it.

  8. #68

    jpuigs's Avatar
    Join Date
    Dec 2017
    Location
    Barcelona
    Age
    50
    Posts
    255
    Rep Power
    68921

    Re: OTT (DVB-MPE)

    Code:
    dvbsnoop V1.4.55 -- https://github.com/OpenVisionE2/dvbsnoop
    ---------------------------------------------------------
    Transponder PID-Scan...
    ---------------------------------------------------------
    PID found:    0 (0x0000)  [SECTION: Program Association Table (PAT)]
    PID found:    1 (0x0001)  [SECTION: Conditional Access Table (CAT)]
    PID found:   16 (0x0010)  [SECTION: Network Information Table (NIT) - actual network]
    PID found:   17 (0x0011)  [SECTION: Service Description Table (SDT) - actual transport stream]
    PID found:   20 (0x0014)  [SECTION: Time Offset Table (TOT)]
    PID found: 2000 (0x07d0)  [SECTION: Program Map Table (PMT)]
    PID found: 2002 (0x07d2)  [SECTION: DSM-CC - private data section  // DVB datagram]
    PID found: 3000 (0x0bb8)  [SECTION: Program Map Table (PMT)]
    PID found: 3001 (0x0bb9)  [SECTION: IP/MAC Notification Table (INT) [EN 301 192]]

    PID 2002 is the only one which is curently active , but looking at its bandwidth (about 2 kbit/s) , it doesn't carry any tv channel….

  9. #69

    Re: OTT (DVB-MPE)

    next time on PID-2002 start test Broadpeak
    Mutant HD51 , OSmio+ 4K , Dreambox 900UHD/7020HD/500HD , iNEOS ZX4 , TBS-5925 , TBS-5880 , TBS-5220
    WaveFrontier T90 /39E-36E-31E-28E-26E-23E-19E-16E-13E-9E-7E-5E-1W-4W/
    Gibertini OP100L /90E-53W/
    ROVER AtomLight STC+

  10. #70

    Question maybe this it`s OTT ?

    68.5 East - 12522 H DVB-S2/QPSK SR-30000 FEC-2/3
    3 pids in stream without identification
    PCR - 1FFF
    PMT - 0FA0
    DSM-CC - 0BB8
    SID-0001 from PMT
    Code:
    47 4F A0 1E
     00 02 B0 15 0001 C1 00
     00 FFFF F0 00
     0D EBB8 F0 03 52 01 01 - DSM-CC Section
    88 5F 5A 09

    after stored 0BB8 and extract in OTTextractor show some corrupted video stream
    after stored fullTS and extract in OTTextractor create unsuported file
    IPcleaner not create file

    PS: not known if dvbsnoop not analyse PMT pid
    Code:
    root@dm920:~# dvbsnoop -demux /dev/dvb/adapter0/demux0 -frontend /dev/dvb/adapter0/frontend1 -n 1 -nph 0xFA0
    Code:
    root@dm920:~# dvbsnoop -frontend /dev/dvb/adapter0/frontend1 -s feinfo -pd 9
    dvbsnoop V1.4.51 -- http://dvbsnoop.sourceforge.net/
       DEMUX : /dev/dvb/adapter0/demux0
       DVR   : /dev/dvb/adapter0/dvr0
       FRONTEND: /dev/dvb/adapter0/frontend1
    
    ---------------------------------------------------------
    FrontEnd Info...
    ---------------------------------------------------------
    
    Device: /dev/dvb/adapter0/frontend1
    
    Basic capabilities:
        Name: "Si2166D"
        Frontend-type:       QPSK (DVB-S)
        Frequency (min):     900.000 MHz
        Frequency (max):     2150.000 MHz
        Frequency stepsiz:   125.000 MHz
        Frequency tolerance: 0.000 MHz
        Symbol rate (min):     0.000000 MSym/s
        Symbol rate (max):     45.000000 MSym/s
        Symbol rate tolerance: 0 ppm
        Notifier delay: 0 ms
        Frontend capabilities:
            auto inversion
            FEC 1/2
            FEC 2/3
            FEC 3/4
            FEC 4/5
            FEC 5/6
            FEC 6/7
            FEC 7/8
            FEC AUTO
            QPSK
    
    Current parameters:
        Frequency:  1922.000 MHz
        Inversion:  AUTO
        Symbol rate:  30.000000 MSym/s
        FEC:  FEC 2/3
    Mutant HD51 , OSmio+ 4K , Dreambox 900UHD/7020HD/500HD , iNEOS ZX4 , TBS-5925 , TBS-5880 , TBS-5220
    WaveFrontier T90 /39E-36E-31E-28E-26E-23E-19E-16E-13E-9E-7E-5E-1W-4W/
    Gibertini OP100L /90E-53W/
    ROVER AtomLight STC+

Page 7 of 8 FirstFirst ... 345678 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •