With Satdreamgr-5-vusolo4k-20180102 my conax modul does not clear picture, with openpli 6.1rc no problem.
With Satdreamgr-5-vusolo4k-20180102 my conax modul does not clear picture, with openpli 6.1rc no problem.
Hi,
We do not have such module in order to test it.
Upload a debug log, there might be something in the log that can help.
Above command will create a log in /tmp with name e2.log, upload it somewhere and post link.Code:init 4 ENIGMA_DEBUG_LVL=4 enigma 2>&1 | tee /tmp/e2.log
Member SatDreamGr Projects
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
sorry this is correct
Code:init 4 ENIGMA_DEBUG_LVL=4 enigma2 2>&1 | tee /tmp/e2.log
Member SatDreamGr Projects
hope its ok
Last edited by ricki; 04-01-18 at 11:01.
Is this a normal CAM or a new CI+ one?
Because it tries to authenticate as CI+, and it fails.
Member SatDreamGr Projects
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
Yes is a CI+ cam but it does not clear any channals at all.
Most probably you need to install "CI+ certificates" and give a try.
Member SatDreamGr Projects
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
There are currently 1 users browsing this thread. (0 members and 1 guests)