Hi,
I have done an online update this evening "Experimental SatDream Image" but my octagon stay on booting....
Reflash with USB, and after restore parameters try an update again, same issue my octagon stay on booting.
Thanks for reply
Hi,
I have done an online update this evening "Experimental SatDream Image" but my octagon stay on booting....
Reflash with USB, and after restore parameters try an update again, same issue my octagon stay on booting.
Thanks for reply
TBS5520SE > Fibo 90cm USALS = 68°e > 45°w
Octagon SF4008 & Edision Mio 4K
Multisat Indoor Home Made 10 LNB 52°e > 5°w
Fibo 90cm USALS = 68°e > 45°w
Used the latest driver update! Damn...
Member SatDreamGr Projects
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
Thankd Athoik,
Yes Octagon and driver...We could make a movie!
Wil you remove this one from the update?
Or we are waiting for an update from Octagon?
Last edited by stpierre; 29-12-17 at 10:07.
TBS5520SE > Fibo 90cm USALS = 68°e > 45°w
Octagon SF4008 & Edision Mio 4K
Multisat Indoor Home Made 10 LNB 52°e > 5°w
Fibo 90cm USALS = 68°e > 45°w
Hi,
Same here when I manually try to update the driver file, the SF4008 get blocked on booting.
In the updated drivers the nxserver file went from 190 KB to 803 KB this sound quite strange to me.
Pr2
Xtrend ET-9000, VU+ Solo 4K, Octagon SF4008
We don't know yet what is going on.
Maybe it's kernel crash, somebody should get serial logs (internally it has a serial port, but requires a special cable "ttl device 3.3").
Member SatDreamGr Projects
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
Any idea where the TTL header or connection is located inside the SF4008? I see two possibilities, and neither are marked.
Thanks.
update done without last driver..everythink ok
thanks athoik
Hello All
Does anybody know if the problem was corrected?
Please let us know.
Regards.
Chewie
Hi,
You can perform an online update now without problem on the SF4008 but I think that it is still use the old drivers.
Pr2
Xtrend ET-9000, VU+ Solo 4K, Octagon SF4008
Καλησπέρα,
Μόλις την πάτησα....
Έκανα αναβάθμιση και έμεινα στο booting.....
Ποια έκδοση να προσπαθήσω να κάνω flash μέσω USB?
There are currently 1 users browsing this thread. (0 members and 1 guests)