βασικα...
περνας 8αρι και κανεις επαναφορα αποθηκευμενων ρυθμισεων (απο 6) ???
αν ναι, εκει ειναι το προβλημα , και το αναφεραμε στο release του 8
βασικα...
περνας 8αρι και κανεις επαναφορα αποθηκευμενων ρυθμισεων (απο 6) ???
αν ναι, εκει ειναι το προβλημα , και το αναφεραμε στο release του 8
ολα ειναι FLU
Member SatDreamGr Projects
και εγω το εψαξα στο διαδικτυο και βρηκα αυτα που γραφεις... ναι εκανα καποιες αλλαγες
οχι δεν τονδωσεις πουθενα
αυτα εχει μεσα
# Example config file /etc/vsftpd/vsftpd.conf
# Allow anonymous FTP? (Beware - allowed by default if you comment this out).
anonymous_enable=NO
#
# Uncomment this to allow local users to log in.
local_enable=YES
#
# Uncomment this to enable any form of FTP write command.
write_enable=YES
#
# Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)
local_umask=022
# Activate directory messages - messages given to remote users when they
# go into a certain directory.
dirmessage_enable=YES
#
# Activate logging of uploads/downloads.
xferlog_enable=YES
#
# Make sure PORT transfer connections originate from port 20 (ftp-data).
connect_from_port_20=YES
#
# If you want, you can have your log file in standard ftpd xferlog format
xferlog_std_format=YES
#
chroot_local_user=YES
pam_service_name=vsftpd
userlist_enable=YES
#enable for standalone mode
listen=YES
tcp_wrappers=YES
use_localtime=YES
τις αλλαγες, για ποιον λογο να τις κανεις???
το δικο μου που ειναι απειραχτο ειναι ετσι (και δεν ειχα ποτε προβλημα),
επισης, δεν μου απαντησες, εαν κανεις επαναφορα ρυθμισεων απο sdg6 οταν περνας καινουριο 8.Code:# Example config file /etc/vsftpd.conf # # The default compiled in settings are fairly paranoid. This sample file # loosens things up a bit, to make the ftp daemon more usable. # Please see vsftpd.conf.5 for all compiled in defaults. # # READ THIS: This example file is NOT an exhaustive list of vsftpd options. # Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's # capabilities. # run standalone listen=NO # No PAM sessions to save resources session_support=NO # Allow anonymous FTP? (Beware - allowed by default if you comment this out). anonymous_enable=NO # # Uncomment this to allow local users to log in. local_enable=YES # # Uncomment this to enable any form of FTP write command. write_enable=YES # # Default umask for local users is 077. You may wish to change this to 022, # if your users expect that (022 is used by most other ftpd's) local_umask=022 # # Uncomment this to allow the anonymous FTP user to upload files. This only # has an effect if the above global write enable is activated. Also, you will # obviously need to create a directory writable by the FTP user. #anon_upload_enable=YES # # Uncomment this if you want the anonymous FTP user to be able to create # new directories. #anon_mkdir_write_enable=YES # # Activate directory messages - messages given to remote users when they # go into a certain directory. dirmessage_enable=YES # # Activate logging of uploads/downloads. xferlog_enable=NO # # Make sure PORT transfer connections originate from port 20 (ftp-data). connect_from_port_20=NO # # If you want, you can arrange for uploaded anonymous files to be owned by # a different user. Note! Using "root" for uploaded files is not # recommended! #chown_uploads=YES #chown_username=whoever # # You may override where the log file goes if you like. The default is shown # below. #xferlog_file=/var/log/vsftpd.log # # If you want, you can have your log file in standard ftpd xferlog format xferlog_std_format=YES # # You may change the default value for timing out an idle session. #idle_session_timeout=600 # # You may change the default value for timing out a data connection. #data_connection_timeout=120 # # It is recommended that you define on your system a unique user which the # ftp server can use as a totally isolated and unprivileged user. #nopriv_user=ftp # # Enable this and the server will recognise asynchronous ABOR requests. Not # recommended for security (the code is non-trivial). Not enabling it, # however, may confuse older FTP clients. #async_abor_enable=YES # # By default the server will pretend to allow ASCII mode but in fact ignore # the request. Turn on the below options to have the server actually do ASCII # mangling on files when in ASCII mode. # Beware that turning on ascii_download_enable enables malicious remote parties # to consume your I/O resources, by issuing the command "SIZE /big/file" in # ASCII mode. # These ASCII options are split into upload and download because you may wish # to enable ASCII uploads (to prevent uploaded scripts etc. from breaking), # without the DoS risk of SIZE and ASCII downloads. ASCII mangling should be # on the client anyway.. #ascii_upload_enable=YES #ascii_download_enable=YES # # You may fully customise the login banner string: #ftpd_banner=Welcome to blah FTP service. # # You may specify a file of disallowed anonymous e-mail addresses. Apparently # useful for combatting certain DoS attacks. #deny_email_enable=YES # (default follows) #banned_email_file=/etc/vsftpd.banned_emails # # You may specify an explicit list of local users to chroot() to their home # directory. If chroot_local_user is YES, then this list becomes a list of # users to NOT chroot(). #chroot_list_enable=YES # (default follows) #chroot_list_file=/etc/vsftpd.chroot_list # # You may activate the "-R" option to the builtin ls. This is disabled by # default to avoid remote users being able to cause excessive I/O on large # sites. However, some broken FTP clients such as "ncftp" and "mirror" assume # the presence of the "-R" option, so there is a strong case for enabling it. #ls_recurse_enable=YES # # This string is the name of the PAM service vsftpd will use. pam_service_name=vsftpd # # This option is examined if userlist_enable is activated. If you set this # setting to NO, then users will be denied login unless they are explicitly # listed in the file specified by userlist_file. When login is denied, the # denial is issued before the user is asked for a password. userlist_deny=YES # # If enabled, vsftpd will load a list of usernames, from the filename given by # userlist_file. If a user tries to log in using a name in this file, they # will be denied before they are asked for a password. This may be useful in # preventing cleartext passwords being transmitted. See also userlist_deny. userlist_enable=NO # # If enabled, vsftpd will display directory listings with the time in your # local time zone. The default is to display GMT. The times returned by the # MDTM FTP command are also affected by this option. use_localtime=YES # # If set to YES, local users will be (by default) placed in a chroot() jail in # their home directory after login. Warning: This option has security # implications, especially if the users have upload permission, or shell access. # Only enable if you know what you are doing. Note that these security implications # are not vsftpd specific. They apply to all FTP daemons which offer to put # local users in chroot() jails. chroot_local_user=NO # allow_writeable_chroot=YES # tcp_wrappers=NO local_root=/
ολα ειναι FLU
Member SatDreamGr Projects
τωρα μου βγαζει αυτο 500 OOPS: bad bool value in config file for: listen
αρχικα να ρωτησω, τι εκανες και σου βγαζει τωρα αυτο...?
ολα ειναι FLU
Member SatDreamGr Projects
αυτο με βγαζει απο το πρωι με βγαζει κ αλλα διαφορα για user για pass
??? τα διαβαζεις τα σφαλματα? η τα βλεπεις ολα ιδια?
το πρωι μου εβαλες αυτο
το τελευταιο ειναι αυτοCode:500 OOPS: bad bool value in config file for: anonymous_enable
ρωταω τον λογο που πειραζεις το συγκεκριμενο αρχειο...? (δεν μου ειπες)Code:500 OOPS: bad bool value in config file for: listen
και εχεις πειραγμενο το αρχειο, πολυ πιθανο καποιες απο τις επιλογες που εχεις βαλει να μην ειναι αποδεκτες.
αν εχεις προσβαση στον δεκτη με ftp, πας στο vsftpd.conf και κανε copy/paste αυτο που εχω στο μυνημα #25
Last edited by georgeflu; 01-10-20 at 23:43.
ολα ειναι FLU
Member SatDreamGr Projects
There are currently 1 users browsing this thread. (0 members and 1 guests)