Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: Satdreamgr-5-vuduo2-20170928

  1. #1

    Satdreamgr-5-vuduo2-20170928

    Hi,

    Installed said image Saturday and blindscan does not work. Either C or Ku get same error message

    Thanks..
    Attached Images Attached Images

  2. #2

    athoik's Avatar
    Join Date
    Sep 2012
    Location
    Earth
    Posts
    10,758
    Rep Power
    5927763

    Απ: Satdreamgr-5-vuduo2-20170928

    Seems like blidnscan utility is missing!

    Try to install them using command: opkg install vuplus-blindscan-dvbs-utils-vuduo2
    Member SatDreamGr Projects

    Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
    Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916

  3. #3

    Re: Satdreamgr-5-vuduo2-20170928

    Thanks Athoik, that did the trick.

    Another quick question. Every time I do a new version flash via a usb stick, afterwards do a restore settings, I still have to reinstall the Hauppauge driver for my terrestrial channels. Then I have to reboot and do:

    opkg update && opkg install kernel-module-cx231xx-dvb && opkg install kernel-module-cx231xx-alsa && opkg install kernel-module-cx2341x && opkg install kernel-module-cx231xx && opkg install kernel-module-lgdt3305 && opkg install kernel-module-tda18271 && opkg install kernel-module-tda18271c2dd

    reboot and restart the gui upon which the usb tv tuner will finally be recognized.

    Is this normal?

  4. #4

    Re: Satdreamgr-5-vuduo2-20170928

    I do not think restoring or reloading saved settings will restore drivers. Go into downloadable plugins and install the correct drivers after you flash the receiver.

  5. #5

    Re: Satdreamgr-5-vuduo2-20170928

    I always load atsc-usb-hauppauge 1.0-r0 first.
    Reboot and the tuner is not recognized.
    Then I run the opkg routine, reboot, restart e2 and the tuner is recognized.

  6. #6

    athoik's Avatar
    Join Date
    Sep 2012
    Location
    Earth
    Posts
    10,758
    Rep Power
    5927763

    Απ: Satdreamgr-5-vuduo2-20170928

    Do you make use of Auto backup plug-in? Is Auto install option enabled?
    Member SatDreamGr Projects

    Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
    Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916

  7. #7

    Re: Satdreamgr-5-vuduo2-20170928

    Prior to flashing a new version of SDG, I do a manual back with:

    1_AutoBackup.jpg
    using the yellow button.

    Then, just in case, I also do a backup with Backup Suite.
    Finally, I also do a Software Management backup with manually selected files. This way I have a choice should something go south.

  8. #8

    athoik's Avatar
    Join Date
    Sep 2012
    Location
    Earth
    Posts
    10,758
    Rep Power
    5927763

    Απ: Satdreamgr-5-vuduo2-20170928

    With Auto install on, once you reinstall the box it should make all the installations for you.

    Maybe the "meta" driver miss something from those

    Code:
     opkg install kernel-module-cx231xx-dvb && opkg install kernel-module-cx231xx-alsa && opkg install kernel-module-cx2341x && opkg install kernel-module-cx231xx && opkg install kernel-module-lgdt3305 && opkg install kernel-module-tda18271 && opkg install kernel-module-tda18271c2dd
    Member SatDreamGr Projects

    Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
    Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916

  9. #9

    Re: Satdreamgr-5-vuduo2-20170928

    Will see what happens on next flash.

    Thanks.

  10. #10

    Re: Satdreamgr-5-vuduo2-20170928

    Info update.....

    Flashed 2017 10-14 from usb stick. Selected Auto restore after reboot display screen. After reboot, checked to see if atsc-usb-hauppauge 1.0-r0 driver was restored. It was. Usb tuner not recognized even after a reboot plus E2 restart.

    Did a opkg install kernel-module-cx231xx-dvb && opkg install kernel-module-cx231xx-alsa && opkg install kernel-module-cx2341x && opkg install kernel-module-cx231xx && opkg install kernel-module-lgdt3305 && opkg install kernel-module-tda18271 && opkg install kernel-module-tda18271c2dd

    Reboot, usb tuner not recognized. Restart E2 and tuner back online and working properly.

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. προβλημα με τα settins vuduo2
    By panis in forum Περί VU Enigma 2
    Replies: 7
    Last Post: 16-09-18, 17:09
  2. Satdreamgr-5-vuduo2-20171014
    By eastof111 in forum SatDreamGr Images Chat
    Replies: 5
    Last Post: 28-10-17, 09:43
  3. Satdreamgr-5-vuduo2-20170901
    By eastof111 in forum SatDreamGr Images Chat
    Replies: 0
    Last Post: 17-09-17, 10:49
  4. Satdreamgr-5-Vuduo2-20170915_Backup_CyBeRKaNKa
    By cakal in forum Images Vu + Duo2
    Replies: 1
    Last Post: 15-09-17, 13:47
  5. Experimental SatDreamGr Images vuduo2
    By korn in forum Vu+ Duo 2
    Replies: 4
    Last Post: 17-02-16, 19:17

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •