Hi,
Installed said image Saturday and blindscan does not work. Either C or Ku get same error message
Thanks..
Hi,
Installed said image Saturday and blindscan does not work. Either C or Ku get same error message
Thanks..
Seems like blidnscan utility is missing!
Try to install them using command: opkg install vuplus-blindscan-dvbs-utils-vuduo2
Member SatDreamGr Projects
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
Thanks Athoik, that did the trick.
Another quick question. Every time I do a new version flash via a usb stick, afterwards do a restore settings, I still have to reinstall the Hauppauge driver for my terrestrial channels. Then I have to reboot and do:
opkg update && opkg install kernel-module-cx231xx-dvb && opkg install kernel-module-cx231xx-alsa && opkg install kernel-module-cx2341x && opkg install kernel-module-cx231xx && opkg install kernel-module-lgdt3305 && opkg install kernel-module-tda18271 && opkg install kernel-module-tda18271c2dd
reboot and restart the gui upon which the usb tv tuner will finally be recognized.
Is this normal?
I do not think restoring or reloading saved settings will restore drivers. Go into downloadable plugins and install the correct drivers after you flash the receiver.
I always load atsc-usb-hauppauge 1.0-r0 first.
Reboot and the tuner is not recognized.
Then I run the opkg routine, reboot, restart e2 and the tuner is recognized.
Do you make use of Auto backup plug-in? Is Auto install option enabled?
Member SatDreamGr Projects
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
Prior to flashing a new version of SDG, I do a manual back with:
1_AutoBackup.jpg
using the yellow button.
Then, just in case, I also do a backup with Backup Suite.
Finally, I also do a Software Management backup with manually selected files. This way I have a choice should something go south.
With Auto install on, once you reinstall the box it should make all the installations for you.
Maybe the "meta" driver miss something from those
Code:opkg install kernel-module-cx231xx-dvb && opkg install kernel-module-cx231xx-alsa && opkg install kernel-module-cx2341x && opkg install kernel-module-cx231xx && opkg install kernel-module-lgdt3305 && opkg install kernel-module-tda18271 && opkg install kernel-module-tda18271c2dd
Member SatDreamGr Projects
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
Will see what happens on next flash.
Thanks.
Info update.....
Flashed 2017 10-14 from usb stick. Selected Auto restore after reboot display screen. After reboot, checked to see if atsc-usb-hauppauge 1.0-r0 driver was restored. It was. Usb tuner not recognized even after a reboot plus E2 restart.
Did a opkg install kernel-module-cx231xx-dvb && opkg install kernel-module-cx231xx-alsa && opkg install kernel-module-cx2341x && opkg install kernel-module-cx231xx && opkg install kernel-module-lgdt3305 && opkg install kernel-module-tda18271 && opkg install kernel-module-tda18271c2dd
Reboot, usb tuner not recognized. Restart E2 and tuner back online and working properly.
There are currently 1 users browsing this thread. (0 members and 1 guests)