Hello to all,
I have a problem with motorized dish USALS & Octagon SF4008 (SatDreamGr) 2xDVB-S2X + DVB-T2.
Tuner A = Diseqc 1.1 => 10 LNB => 52.0, 45.0, 42.0, 39.0, 28.2, 23.5, 19.2, 13.0 and 0.8, 5.0 west.
Tuner B = USALS 68.5 east => 45.0 west
Tuner C = DVB-T
1) If the motororized dish is on the 9.0 east (tuner B), I choose a channel on the 4.8 east (tuner B) no problem the motor move.
2) If the motororized dish is on the 9.0 east (tuner B), I choose a channel on the 13 east (tuner A) the Tuner A is active and the reception is ok, but now if I want go to a channel on the 4.8 east (tuner B) the motor don't move. It have to choose a channel on the 9.0 east and after that I can go to the 4.8 east...
This installation and configuration work fine since a few years with : Ultimo4K, ET10000, Solo4K.
Sorry for my poor english and thanks for reply.