DE OE2.5 , DMM OE2.5 for dm500hd original-A8P with USB SUPPORT
DRIVERS-MODULES-KERNEL ORIGINAL I have build FOR OE2.2/2.5
IN BACKGROUND RUNNING DM7080 OE2.5 IMAGES
shot.jpg shot1.jpg
1. What is this ?
A image make it with …Win32DiskImager…...from my usb
2. What is inside ?
There are 4 partitions a) BOOT fat32, b)SWAP linux, c)ROOT ext4 with DREAM ELITE 6.0 OE2.5 d)ROOT_01 ext4 with OPENDREAMBOX EXPERIMENTAL OE2.5 .
3. How install ?
Extract on pc the tar.xz file ,install on your pc …Win32DiskImager…., put on pc a usb stick minimum 4GB ,
open …Win32DiskImager…. and write image file to usb.
4. How it is work ?
On flash can you have any image you like.
Make your receiver (dm500hd-original-A8P) to boot from usb …http://wiki.blue-panel.com/index.php...ot_Script_(en)…………….
Put usb stick on receiver, remove any anther device, power on, and your machine boot with deambox picture,
and after DE oe2.5 image
5. How to change from DE to DMM ?
Move usb to pc open boot partition edit with text autoexec_dm500hd.bat file and change in
second line, root=/dev/sda3 to root=/dev/sda4
6. Can do update ?
Yes . BUT after update, before reboot ,look at /etc/modules-load.d/10-dreambox-dvb-
odules.conf , must be bcm7405 if not change it, save , reboot.
7. Feeds addons works ?
Yes
8. What work ?
Everything
IT IS SIMPLE AND ….FUN
DOWNLOAD
http://www.mediafire.com/file/2ubwxw...m-OE2.5.tar.xz
CLONE (dm500hd-sim2 , dm800se-sim2)
have make modules-drivers-kernel oe2.2/2.5 and for dm800se original, but i dont have this receiver for test,
on my dm800se sim2 have try with tricks but is not possible to recognize tuner
if somebody can patch drivers from this image...(i dont know how)
upload , and i make the same usb image for clones