RTL-SDR with Enigma2 (SDG Radio)

[athoik]

hardware decoder can't be set to bypass mode type audio/x-raw

Above means that something uses audio0, stop playing something or stop enigma2 (init 4) to test command!

[Matrix10]

root@vuuno4kse:~# dab-rtlsdr-3 -C 8A -W30 -S 87F0 | gst-launch-1.0 fdsrc ! audio/x-raw, format=S16LE, channels=2, layout=interleaved, rate=48000 ! dvbaudiosink
dab_cmdline V 1.0alfa,
Copyright 2017 J van Katwijk, Lazy Chair Computing
opt = C
opt = W
opt = S
going for rtlsdr 195936000 35
OK, functions seem to be loaded
Setting pipeline to PAUSED ...
Pipeline is PREROLLED ...
Setting pipeline to PLAYING ...
New clock: GstSystemClock
Found Rafael Micro R820T tuner
[R82XX] PLL not locked!
samplerate set to 2048000
Supported gain values (29): 0.0 0.9 1.4 2.7 3.7 7.7 8.7 12.5 14.4 15.7 16.6 19.7 20.7 22.9 25.4 28.0 29.7 32.8 33.8 36.4 37.2 38.6 40.2 42.1 43.4 43.9 44.5 48.0 49.6
effective gain: index 10, gain 166
ofdm word gestart
ensemble 8A Randstad NL is (8018) recognized
Radio M Utrecht (8416) is part of the ensemble
Omroep Flevoland (8417) is part of the ensemble
Radio Rijnmond (841A) is part of the ensemble
Radio Gelderland (8415) is part of the ensemble
Omroep West (8419) is part of the ensemble
NH Radio (8418) is part of the ensemble
Ujala Radio (82FF) is part of the ensemble
VAHON RADIO! (8985) is part of the ensemble
Amor FM (845A) is part of the ensemble
RADIO DECIBEL ZH (87F0) is part of the ensemble
Wild Hitradio (86EF) is part of the ensemble
RADIONL Zuid Hol (8621) is part of the ensemble
RADIONL NoordHol (8421) is part of the ensemble
RADIO DECIBEL NH (86F0) is part of the ensemble
RADIONL Utrecht (8821) is part of the ensemble
there might be a DAB signal here

going to start program RADIO DECIBEL ZH
selected RADIO DECIBEL ZH
startaddress = 528
length = 48
subChId = 12
protection = 2
bitrate = 64
we have now DAB+
ERROR: from element /GstPipelineipeline0/GstDVBAudioSink:dvbaudiosink0: Could not determine type of stream.
Additional debug info:
../git/gstdvbaudiosink.c(923): gst_dvbaudiosink_set_caps (): /GstPipelineipeline0/GstDVBAudioSink:dvbaudiosink0:
hardware decoder can't be set to bypass mode type audio/x-raw
Execution ended after 0:00:30.601881463
Setting pipeline to PAUSED ...
Setting pipeline to READY ...
Setting pipeline to NULL ...
Freeing pipeline ...
root@vuuno4kse:~#

[Matrix10]

hardware decoder can't be set to bypass mode type audio/x-raw

Above means that something uses audio0, stop playing something or stop enigma2 (init 4) to test command!

Which state should I put the receiver on?
in which mode

[athoik]

Just stop enigma2 with init 4 (type init 4 before run dab command).

[Matrix10]

PERFECT @athoik

NICE top Audio

root@vuuno4kse:~# dab-rtlsdr-3 -C 8A -W30 -S 87F0 | gst-launch-1.0 fdsrc ! audio/x-raw, format=S16LE, channels=2, layout=interleave
d, rate=48000 ! dvbaudiosink
dab_cmdline V 1.0alfa,
Copyright 2017 J van Katwijk, Lazy Chair Computing
opt = C
opt = W
opt = S
going for rtlsdr 195936000 35
OK, functions seem to be loaded
Setting pipeline to PAUSED ...
Pipeline is PREROLLED ...
Setting pipeline to PLAYING ...
New clock: GstSystemClock
Found Rafael Micro R820T tuner
[R82XX] PLL not locked!
samplerate set to 2048000
Supported gain values (29): 0.0 0.9 1.4 2.7 3.7 7.7 8.7 12.5 14.4 15.7 16.6 19.7 20.7 22.9 25.4 28.0 29.7 32.8 33.8 36.4 37.2 38.6 4
0.2 42.1 43.4 43.9 44.5 48.0 49.6
effective gain: index 10, gain 166
ofdm word gestart
Radio M Utrecht (8416) is part of the ensemble
Omroep Flevoland (8417) is part of the ensemble
Radio Rijnmond (841A) is part of the ensemble
Radio Gelderland (8415) is part of the ensemble
ensemble 8A Randstad NL is (8018) recognized
Omroep West (8419) is part of the ensemble
NH Radio (8418) is part of the ensemble
Ujala Radio (82FF) is part of the ensemble
VAHON RADIO! (8985) is part of the ensemble
Amor FM (845A) is part of the ensemble
RADIO DECIBEL ZH (87F0) is part of the ensemble
Wild Hitradio (86EF) is part of the ensemble
RADIONL Zuid Hol (8621) is part of the ensemble
RADIONL NoordHol (8421) is part of the ensemble
RADIO DECIBEL NH (86F0) is part of the ensemble
RADIONL Utrecht (8821) is part of the ensemble
there might be a DAB signal here

going to start program RADIO DECIBEL ZH
selected RADIO DECIBEL ZH
startaddress = 528
length = 48
subChId = 12
protection = 2
bitrate = 64
we have now DAB+
DECIBEL JOIN THE MUSIC!P



JE HOORT TECHNOTRONIC - PUMP UP THE JAM

[Matrix10]

NOW PLUGIN

[athoik]

Sure, plugin would be nice but first we need to solve some issues.

eg. How to select/change/display channels and frequency

I can add experimental support in SDGRadio soon. eg a version with autoselect the first available channel.

[stpierre]

I've already tested this
I think the problem is that I have different audio inside the stream ????

I think you have to make several tests with the same command because sometime that work and sometime not.

I have made other test tomorrow with différents parameters and antennas, but it's not easy because that don't work each time with same parameters and antennas.
Sorry for my poor English.

[Matrix10]

Working here perfect.No problems

I tried with the old Plugin
with defined channels (commands) and it works.
The truth , you have to wait to move from one channel to another.
In log i can see all channels and text massages from radio channel.

I think the new plugin should have a scanning option.
DAB frequencies/channels are defined.
The scan would find the channel names.

From scanned channels, you need to have a list, where you can choose the desired channel

[athoik]

Old plugin is fine, it's easy to manipulate, and till today nobody made something better...

Sure what you are suggesting is the way to go, scanning, auto-tune and more... but since nobody is working on this don't expect to be created all of a sudden!


I just compiled test3 from my branch with the change to auto-select the first available channel found: https://github.com/athoik/dab-cmdlin...ab545e38b696c7

Also I send an update for SDGRadio with experimental support for DAB/DAB+ : https://github.com/satdreamgr/SDGRad...7091d24aa10460

Please report if the first commit works, in order to merge back to master from dev.

(in order to test download plugin.py from here https://raw.githubusercontent.com/sa...ugin/plugin.py and place it in /usr/lib/enigma2/python/Plugins/Extensions/SDGRadio folder, then restart e2).