Results 1 to 3 of 3

Thread: 30 West / 11422 V

  1. #1

    Question 30 West / 11422 V

    Hi,
    on Hispasat now HD channel but without defined PID`s in PMT.
    11422 V , DVB-S2/8PSK , SR-3333 , FEC-3/4

    Now edit lamedb and lamedb5 but not picture , sound OK (debug show set demux to MPEG2 but need MPEG4)

    Code:
    0ce40000:0032:0036
    	s 11422000:3333000:1:3:-300:2:0:1:2:0:2
    /
    Code:
    0000:0ce40000:0032:0036:25:0
    KURIAKOS
    p:11422V,c:000300,c:010301,c:030300,f:4
    Code:
    <   708.216> playing 1:0:19:0:32:36:CE40000:0:0:0:
    [  708.285000] stop pcr0 on dmx 0 pid:1e00
    [  708.286000] stop video0 on dmx 0 pid:1e00
    [  708.307000] VIDEO0: stop decode
    [  708.308000] VIDEO0: set blank to 1
    [  708.309000] audio: decoder stop
    [  708.310000] stop audio on dmx 0 pid:1e01
    [  708.311000] audio: xpt stop(2)
    [  708.311000] no decoder left in sync handling so disable xpt_sync
    [  708.312000] bcm_audio_channel_stop(2) done
    cleaning up
    TuxTxt cache cleared
    <   708.323> getResolvedKey config.usage.remote_fallback failed !! (Typo??)
    <   708.425> not pauseable.
    <   708.429> not pauseable.
    <   708.433> not pauseable.
    <   708.437> new service started! trying to download cuts!
    <   708.437> download failed, no cuesheet interface
    <   708.439> RemovePopup, id = ZapError
    [  708.675000] pilot_off!
    TuxTxt cache cleared
    [  708.865000] start pcr0 on dmx 0 pid:300 index 1
    [  708.866000] start audio on dmx 0 pid:301
    [  708.867000] audio xpt start
    [  708.867000] sync is off so we enable it
    [  708.868000] demux-index 0 pcr0pid 300
    [  708.868000] using 1 as pcr0 pidchannel
    [  708.869000] MPEG
    [  708.869000] audio: decoder start 0
    [  708.871000] audio delay 18000 (200 ms)
    [  708.872000] total video delay: 18000 (200 ms)
    [  708.873000] VIDEO0: set streamtype!
    [  708.873000] set MPEG2
    [  708.874000] sw rave disabled!
    [  708.874000] video delay 0 (0 ms)
    [  708.874000] total video delay: 0 (0 ms)
    [  708.875000] start video0 on dmx 0 pid:300
    [  708.876000] total video delay: 0 (0 ms)
    [  708.879000] VIDEO0: start decode
    <   708.879> [eDVBPESReader] Created. Opening demux
    <   708.880> [eDVBPESReader] Created. Opening demux
    <   708.884> not pauseable.
    <   708.888> not pauseable.
    [  708.980000] RAP first pts 0x5d9abf94, stc 0x5d9aa206, pcr valid
    [  708.983000] audio_cdb_itb_error_isr: 35 callbacks suppressed
    [  708.983000] audio_cdb_itb_error_isr! underflow
    [  708.987000] audio_cdb_itb_error_isr! underflow
    [  708.991000] audio_cdb_itb_error_isr! underflow
    [  708.995000] audio_cdb_itb_error_isr! underflow
    [  708.999000] audio_cdb_itb_error_isr! underflow
    [  709.003000] ch0: lock
    [  709.003000] RAP sampling rate info isr (48000)
    [  709.004000] eModeChange Isr.. set source_changed_event!



    any idea for fix ?
    Last edited by EnoSat; 06-11-16 at 17:46.

  2. #2

    athoik's Avatar
    Join Date
    Sep 2012
    Location
    Earth
    Posts
    10,758
    Rep Power
    5927763

    Απ: 30 West / 11422 V

    Hi,

    You can use c:05000X in lamedb to define the videotype.


    c:05000X is the cache for video type (cVTYPE in lib/dvb/idvb.h) and X is one of the following (enum from videostream struct lib/dvb/pmtparse.h)

    Code:
    vtMPEG2       = 0
    vtMPEG4_H264  = 1
    vtMPEG1       = 2
    vtMPEG4_Part2 = 3
    vtVC1         = 4
    vtVC1_SM      = 5
    vtH265_HEVC   = 6
    vtCAVS        = 7
    So for h264 you need c:050001 in lamedb.
    Member SatDreamGr Projects

    Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
    Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916

  3. #3

    Lightbulb Re: Απ: 30 West / 11422 V

    yes,
    again thanks

    Last edited by EnoSat; 06-11-16 at 19:31.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 4 Νέα κανάλια UHD στις 0,8 West.
    By Irte180 in forum Δορυφορικές λήψεις
    Replies: 7
    Last Post: 09-02-21, 13:34
  2. Λήψη Eutelsat 5 West A (5.0°W)
    By athoik in forum Δορυφορικές λήψεις
    Replies: 123
    Last Post: 17-12-17, 22:39
  3. 27.5 West
    By melacoton in forum SatDreamGr Images Chat
    Replies: 35
    Last Post: 02-12-16, 04:40
  4. ERT World Europe σε Eutelsat 8 West B 8° West
    By xristoss in forum Δορυφορικές λήψεις
    Replies: 5
    Last Post: 04-05-16, 22:48
  5. Λήψη Eutelsat 12 West B @ 12.5° West
    By xristoss in forum Δορυφορικές λήψεις
    Replies: 0
    Last Post: 29-02-16, 23:04

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •