Results 1 to 7 of 7
  1. #1

    athoik's Avatar
    Join Date
    Sep 2012
    Location
    Earth
    Posts
    10,255
    Total Downloaded
    0
    Rep Power
    1755533

    How to use T2-MI

    Hello,


    Our latest experimental images now include an option to use T2-MI with the help of astra-sm (opkg install astra-sm), without dedicating tuner to astra-sm!

    First we need to configure manual the lamedb with the new option cached data pid and f:4 flag (c:151000 => cached data pid 4096).

    With those entries in lamedb we can stream the PID containing the T2-MI, then astra-sm receives the stream and de-encapsulates T2-MI.

    Finally Enigma2 receives the full encapsulated T2-MI (even EGP when included by provider).

    Below you can find an example for Zeonbud package at 4.8E (requires Multistream enabled tuner).

    1. Use the following entries in lamedb.

    Code:
    eDVB services /4/
    transponders
    0030b022:0048:0010
    	s 12188000:30000000:0:3:48:2:0:1:2:0:2:10:0:1
    /
    0030b022:0048:0020
    	s 12188000:30000000:0:3:48:2:0:1:2:0:2:20:0:1
    /
    0030b022:0048:0030
    	s 12341000:30000000:0:3:48:2:0:1:2:0:2:30:0:1
    /
    end
    services
    0001:0030b022:0048:0010:1:0
    12188H MIS 10
    p:ZEONBUD,c:151000,f:4
    0001:0030b022:0048:0020:1:0
    12188H MIS 20
    p:ZEONBUD,c:151000,f:4
    0001:0030b022:0048:0030:1:0
    12341H MIS 30
    p:ZEONBUD,c:151000,f:4
    end
    Have a lot of bugs!
    2. Use the following bouquet

    Code:
    #NAME zeonbud
    #SERVICE 1:0:1:1:48:10:30B022:0:0:0:
    #SERVICE 1:0:1:1:48:20:30B022:0:0:0:
    #SERVICE 1:0:1:1:48:30:30B022:0:0:0:
    #SERVICE 1:0:1:B:48:10:0:0:0:0:http%3a//localhost%3a9999/zeonbud/mis10:Інтер
    #SERVICE 1:0:1:C:48:10:0:0:0:0:http%3a//localhost%3a9999/zeonbud/mis10:Україна
    #SERVICE 1:0:1:D:48:10:0:0:0:0:http%3a//localhost%3a9999/zeonbud/mis10:1+1
    #SERVICE 1:0:1:E:48:10:0:0:0:0:http%3a//localhost%3a9999/zeonbud/mis10:НТН
    #SERVICE 1:0:1:F:48:10:0:0:0:0:http%3a//localhost%3a9999/zeonbud/mis10:К-1
    #SERVICE 1:0:1:10:48:10:0:0:0:0:http%3a//localhost%3a9999/zeonbud/mis10:ПЕРШИЙ Т2
    #SERVICE 1:0:1:11:48:10:0:0:0:0:http%3a//localhost%3a9999/zeonbud/mis10:ICTV
    #SERVICE 1:0:1:12:48:10:0:0:0:0:http%3a//localhost%3a9999/zeonbud/mis10:Enter-фільм
    #SERVICE 1:0:1:15:48:20:0:0:0:0:http%3a//localhost%3a9999/zeonbud/mis20:ZOOM
    #SERVICE 1:0:1:16:48:20:0:0:0:0:http%3a//localhost%3a9999/zeonbud/mis20:Кіноточка
    #SERVICE 1:0:1:17:48:20:0:0:0:0:http%3a//localhost%3a9999/zeonbud/mis20:СТБ
    #SERVICE 1:0:1:18:48:20:0:0:0:0:http%3a//localhost%3a9999/zeonbud/mis20:ТЕТ
    #SERVICE 1:0:1:19:48:20:0:0:0:0:http%3a//localhost%3a9999/zeonbud/mis20:К-2
    #SERVICE 1:0:1:1A:48:20:0:0:0:0:http%3a//localhost%3a9999/zeonbud/mis20:Новий канал
    #SERVICE 1:0:1:1B:48:20:0:0:0:0:http%3a//localhost%3a9999/zeonbud/mis20:М-1
    #SERVICE 1:0:1:1C:48:20:0:0:0:0:http%3a//localhost%3a9999/zeonbud/mis20:5 канал
    #SERVICE 1:0:1:1F:48:30:0:0:0:0:http%3a//localhost%3a9999/zeonbud/mis30:Мега
    #SERVICE 1:0:1:20:48:30:0:0:0:0:http%3a//localhost%3a9999/zeonbud/mis30:Pixel
    #SERVICE 1:0:1:21:48:30:0:0:0:0:http%3a//localhost%3a9999/zeonbud/mis30:XSPORT
    #SERVICE 1:0:1:22:48:30:0:0:0:0:http%3a//localhost%3a9999/zeonbud/mis30:НЛО ТБ
    #SERVICE 1:0:1:23:48:30:0:0:0:0:http%3a//localhost%3a9999/zeonbud/mis30:2+2
    #SERVICE 1:0:1:24:48:30:0:0:0:0:http%3a//localhost%3a9999/zeonbud/mis30:DOBRO
    #SERVICE 1:0:1:25:48:30:0:0:0:0:http%3a//localhost%3a9999/zeonbud/mis30:ЕСПРЕСО TV
    #SERVICE 1:0:1:26:48:30:0:0:0:0:http%3a//localhost%3a9999/zeonbud/mis30:BUSINESS
    #SERVICE 1:0:1:65:48:30:0:0:0:0:http%3a//localhost%3a9999/zeonbud/mis30:Газета по-русски
    #SERVICE 1:0:1:66:48:30:0:0:0:0:http%3a//localhost%3a9999/zeonbud/mis30:Газета українскою
    3. Use the following astra.conf (should be placed in /etc/astra/astra.conf)

    Code:
    -- Astra Slonik Mod
    
    log.set({ stdout = false, debug = false, syslog = "astra", })
    
    ze48mis10 = make_t2mi_decap({
            name = "12188 MIS 10", -- required
            input = "http://127.0.0.1:8001/1:0:1:1:48:10:30B022:0:0:0:", -- required
            plp = 0, -- optional, defaults to first PLP listed in L1
            pnr = 0, -- optional, PNR containing T2-MI payload
            pid = 4096, -- optional, force payload pid
    })
    
    ze48mis20 = make_t2mi_decap({
            name = "12188 MIS 20",
            input = "http://127.0.0.1:8001/1:0:1:1:48:20:30B022:0:0:0:",
            plp = 0,
            pnr = 0,
            pid = 4096,
    })
    
    ze48mis30 = make_t2mi_decap({
            name = "12341 MIS 30",
            input = "http://127.0.0.1:8001/1:0:1:1:48:30:30B022:0:0:0:",
            plp = 0,
            pnr = 0,
            pid = 4096,
    })
    
    make_channel({
            name = "mis 10", input = { "t2mi://ze48mis10", },
            output = { "http://0.0.0.0:9999/zeonbud/mis10", },
    })
    
    make_channel({
            name = "mis 20", input = { "t2mi://ze48mis20", },
            output = { "http://0.0.0.0:9999/zeonbud/mis20", },
    })
    
    make_channel({
            name = "mis 30", input = { "t2mi://ze48mis30", },
            output = { "http://0.0.0.0:9999/zeonbud/mis30", },
    })




    Enjoy!
    Last edited by athoik; 24-10-16 at 19:06.
    Member SatDreamGr Projects

    Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
    Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916

  2. #2
    Robinson's Avatar
    Join Date
    Nov 2016
    Age
    46
    Posts
    124
    Total Downloaded
    0
    Rep Power
    0

    Re: How to use T2-MI

    Can the same method be used on boxes not supported by SatDreamGr?

  3. #3
    serge61's Avatar
    Join Date
    Jan 2018
    Age
    58
    Posts
    2
    Total Downloaded
    0
    Rep Power
    0

    Re: How to use T2-MI

    Will this method work on VU + Ultimo 4K? tuner DVB-S2 (X)

  4. #4
    serge61's Avatar
    Join Date
    Jan 2018
    Age
    58
    Posts
    2
    Total Downloaded
    0
    Rep Power
    0

    Re: How to use T2-MI

    Quote Originally Posted by athoik View Post
    Below you can find an example for Zeonbud package at 4.8E (requires Multistream enabled tuner).
    Will this method work on VU + Ultimo 4K? tuner DVB-S2 (X)

  5. #5

    ferryman's Avatar
    Join Date
    Jan 2011
    Posts
    56
    Total Downloaded
    0
    Rep Power
    2179

    Re: How to use T2-MI

    Quote Originally Posted by serge61 View Post
    Will this method work on VU + Ultimo 4K? tuner DVB-S2 (X)
    try it on open pli and open atv .
    i think open atv yes (i try it with dm 900 4k and work )

  6. #6
    Krutoj2010's Avatar
    Join Date
    Sep 2016
    Age
    64
    Posts
    1
    Total Downloaded
    0
    Rep Power
    0

    Re: How to use T2-MI

    Dear athoik please tell
    I have this imaging here,
    satdreamgr-images-experimentalvuvuultimo4k and
    I can not on the vu-ultimo4k run Zeonbud 4.8E
    Multistream I do not have a DVB-S2X tuner,maybe
    Can I run Zeonbud 4.8E on vu-ultimo4k ?

  7. #7
    4Him's Avatar
    Join Date
    Nov 2016
    Posts
    28
    Total Downloaded
    0
    Rep Power
    0

    Re: How to use T2-MI

    hello it's seems on air 3 t2-mi trasponder on 36east (sub saharian beam) that I can catch from Rome.

    I've SF4008.

    can someone help me what to insert in astra.conf and lamedb in order to catch that trasponder, please?



    what parameters could helps?



    an italian forum user gave me some screenshot from t2-mi analyzer



    thank you best regards
    Jesus is my Saviour
    ************
    1.20 Laminas
    Rome, Italy

    Receivers: Octagon SF4008 - Octagon SX8 One - Golden Interstar Revolution - Vantage 7100 - Tbs 5980
    Subscriptions & cards: Bein Sports Mena - Tring - Digitalb - Nc+ with Eleven Sports - TVR

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •