Results 1 to 3 of 3

Thread: OpenPLi-4 / Gstreamer 1.7.0 (master git)

  1. #1

    OpenPLi-4 / Gstreamer 1.7.0 (master git)

    DM800: OpenPLi-4 / Gstreamer 1.7.0 (master git)

    This image was built with all the help and patches presented to me by gjstroom :-)

    Changes compared to openpli-oe-core gst-1:

    - Ships with gstreamer upstream master git:
    Using the same patches as openpli-oe-core gst-1, no changes or extra patches added.
    Only patch I've removed is: 0001-baseparse-post-tag-list-when-avg-bitrate-changes-at-.patch,
    because that patch is already accepted and commited to upstream git.
    - Every receiver uses christophecvr's multibox dvbmediasink.
    - Using libtrmp and rtmpdump from oe-alliance.
    - Some small enigma2 patches for Dreambox receivers (ac3/dts bypass and blanking on zap support).
    These are only applied for Dreambox receivers.
    - AAC to AC3 transcoding V2 by mx3L (requires a fast cpu).
    - IPTV Player from samsamsam included (thx to Athoik for the recipe).
    - Large list of public IPTV streams included thanks to the Japhar Team.
    - Updated libcdio and cdtextinfo for audio-cd support by Christophecvr.
    - Spark images includes the pti.ko from OpenATV so softcam's should work now.
    - DM800 kernel will now always pass the vermagic check when loading modules.
    Now you can try and load any DM800 2.6.18 kernel module from OE1.5 to 2.0.

    Dreambox DM800:
    https://mega.nz/#!ft...Ic9mDPNWrqxsTcs

  2. #2

    Re: OpenPLi-4 / Gstreamer 1.7.0 (master git)

    Link outdated. Check again dear............

  3. #3

    korn's Avatar
    Join Date
    Dec 2010
    Location
    SatDreamGr
    Posts
    51,780
    Rep Power
    2484982

    Απ: OpenPLi-4 / Gstreamer 1.7.0 (master git)

    OpenPLi 4.0 with IPTV (More than 800+ IPTV FREE Channels) by MastaG and Japhar Team

    Users running the previous Gstreamer 1.7.0 image, should be able to peform a Software Update!


    Changes since previous release:

    - mx3L's gstreamer revert which fixes mp4 playback from remote locations
    - Spark drivers updated to 20151113
    - Using aio-grab from oe-alliance which includes fixes for sprak receivers
    - New Japhar IPTV List (thanks to ToySoft).
    - DM8000 has no more gsod's now (thanks to ToySoft for testing!)

    Changes compared to openpli-oe-core gst-1:

    - Ships with gstreamer upstream master git:
    Using the same patches as openpli-oe-core gst-1 with only these changes:
    Removed: 0001-baseparse-post-tag-list-when-avg-bitrate-changes-at-.patch
    because this patch was already checked in upstream.
    Added: 0001-Revert-qtdemux-respect-qt-segments-in-push-mode-for-.patch
    By mx3L which fixes mp4 playback from remote locations.
    - Every receiver uses christophecvr's multibox dvbmediasink.
    - Using libtrmp and rtmpdump from oe-alliance.
    - Some small enigma2 patches for Dreambox receivers (ac3/dts bypass and blanking on zap support).
    These are only applied for Dreambox receivers.
    - AAC to AC3 transcoding V2 by mx3L (requires a fast cpu).
    - IPTV Player from samsamsam included (thx to Athoik for the recipe).
    - Large list of public IPTV streams included thanks to the Japhar Team.
    - Updated libcdio and cdtextinfo for audio-cd support by christophecvr.
    - DM800Se, DM7020HD and DM800SeV2 driver upgraded to 20151201:
    added si2166b blindscan support
    - Spark images includes the pti.ko from OpenATV so softcam's should work now.
    - Using aio-grab source from oe-alliance which includes fixes for spark receivers.
    - The 2.6.18 kernel will now always pass the vermagic check when loading modules.
    Now you can try and load any kernel driver from OE1.5 to 2.0.

    Known issues:

    - DM800 first boot will take a while, please be patient. The next boot will be faster.
    - On spark/spark7162 you need to set 'boxtype = dreambox' for oscam dvbapi.
    We're using the OE-A drivers and 'duckbox' doesn't seem to work on these.
    - On spark/spark7162 you need to set a skin which doesn't resize the framebuffer.
    Because sometimes it doesn't scale back to fullscreen.
    I've included the MX-HQ7 skin for use as workaround.
    - On Zgemma Star you cannot use fullHD skins.
    This is a hardware/driver limitation.
    Please don't try it, it will crash enigma2.
    - Some Dreambox remotes behave very sensitive.
    This causes button presses to register multiple times instead of just once.
    As a workaround you can adjust the key interval:
    Go to: Menu - System - Input devices - dreambox remote control (native).
    Set "Change repeat and delay settings" to yes
    Set "Interval between keys when repeating:" to 200ms or 300ms.
    Press green button (OK)
    Now set the same delay for: "dreambox advanced remote control (native)" as well.


    DOWNLOAD

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. OpenPLi-4 / Gstreamer 1.7.0 (master git)
    By korn in forum Images Vu Solo Se
    Replies: 0
    Last Post: 14-12-15, 20:48
  2. OpenPLi-4 / Gstreamer 1.7.0 (master git)
    By korn in forum Images Vu + Duo2
    Replies: 0
    Last Post: 14-12-15, 20:47
  3. OpenPLi-4 / Gstreamer 1.7.0 (master git)
    By korn in forum Images Vu + Uno
    Replies: 0
    Last Post: 14-12-15, 20:47
  4. OpenPLi-4 / Gstreamer 1.7.0 (master git)
    By korn in forum Images Vu+ Ultimo
    Replies: 0
    Last Post: 14-12-15, 20:46
  5. OpenPLi-4 / Gstreamer 1.7.0 (master git)
    By korn in forum Images Vu Solo2
    Replies: 0
    Last Post: 14-12-15, 20:45

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •