E2USB Enigma2 IMAGE To USB v1.0.0.0 SIM2 EDition PACK-A1 Build 04052015

[img]http://imagizer.**************/v2/640x480q90/537/C9RTgk.png[/img]

[img]http://imagizer.**************/v2/640x480q90/540/lK4MAm.png[/img]
[img]http://imagizer.**************/v2/640x480q90/673/RvroQI.png[/img]
[img]http://imagizer.**************/v2/640x480q90/540/gQjGtT.png[/img]
[img]http://imagizer.**************/v2/640x480q90/673/AS7Kfh.png[/img]
[img]http://imagizer.**************/v2/640x480q90/537/FNOfaG.png[/img]
[img]http://imagizer.**************/v2/640x480q90/538/QpsqUf.png[/img]
[img]http://imagizer.**************/v2/640x480q90/538/4VExoL.png[/img]
[img]http://imagizer.**************/v2/640x480q90/540/mZ3HEl.png[/img]




E2USB new Release Features :

-Performing E2 IMAGE Install To USB
-E2USB Image with 1GB Root Filesystem
-Performing TSMedia Install with Latest version
-Performing Video Boot Install
-Performing IPTV Lib Install


Requirements Settings :
-Internal Flash Based on OE2.0 Kernel 3.2 Image
-Internal Flash Based on DMM opendreambox 2.0.0 :TSImage , Merlin,...

PS:
-No Licence Key activation required For SIM2
-Before Process Please be sure that you have done "Apply Device USB Boot"
-Internal Flash Images based on OpenPli source : OpenATV , BlackHole,..
they are not good to work with it as work platform but vice versa possible
to install them with E2USB as USB image !
-IF the Operation Success but fail to boot from USB the possible reason
is from the USB Flash Drive try with an other one & same that fail at first
may work with diffrent box model as reported in the tests !


[img]http://imagizer.**************/v2/640x480q90/911/rj0gCU.png[/img]



Download E2USB E2 IMAGE To USB v1.0.0.0 PACK-A1 Build 04052015

Best regards , yassinov