Results 1 to 8 of 8

Thread: Move from OpenPLI to SatDreamGr

  1. #1

    Move from OpenPLI to SatDreamGr

    Hello all,

    This is my first post as I just joined this community. My main reason was to move away from the buggy and uncontroled OpenPLI and move to SatDreamGr which I was told is more stable and serious.

    Before I make the move, I would like to be sure that everything I have on my PLI installation will continue to work. I would expect so, but I am worried about the plugins I've been using for a while like FanControl2 and mgcamd. Are they also available from the standard SatDreamGr plugin list/feed?

    Anything special I need to do before I move from OpenPLI to SatDreamGr? I suppose a backup, but the backup function is not very clear in OpenPLI. I already have copies of my config files and can push them back by hand after the move if needed, but a fully automated restore would be more convenient, as long as it does not bring bad settings from OpenPLI into my new installation.

    Anything else I should worry or be careful about?

    FYI, I am using a DM8000

    Thank you and Best Regards,

    Marc

  2. #2

    Re: Move from OpenPLI to SatDreamGr

    Hello,
    Yes the move is very easy : I've done it months ago. Fancontrol2 and mgcamd are available.
    Restoring the settings can also be done.
    You will enjoy it, it has some functions not present in OpenPli and it is indeed very stable on my DM8000.

  3. #3

    Re: Move from OpenPLI to SatDreamGr

    Thank you,

    I will give it a try in the next week or so

  4. #4

    Re: Move from OpenPLI to SatDreamGr

    Updated a few minutes go. So far so good...

    I just need to get used to the new skin :-)

    One question: Since I don't speak Greek, will removing the Greek Streaming and Radio plugins break anything (including future updates)?

  5. #5

    athoik's Avatar
    Join Date
    Sep 2012
    Location
    Earth
    Posts
    10,759
    Rep Power
    5927763

    Απ: Move from OpenPLI to SatDreamGr

    No it should not cause any issues.
    Member SatDreamGr Projects

    Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
    Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916

  6. #6

    Re: Απ: Move from OpenPLI to SatDreamGr

    I ran opkg list-upgradable and see 60 updates. Are they safe or should I wait for the next available image?

    kernel-module-rt2x00usb - 3.2-r14.17.49 - 3.2-r14.19.49
    kernel-module-rtl8187 - 3.2-r14.17.49 - 3.2-r14.19.49
    kernel-module-rt2800lib - 3.2-r14.17.49 - 3.2-r14.19.49
    enigma2-plugin-extensions-mediascanner - 2.7+git12270+ad53578-r67 - 2.7+git12322+98e735a-r67
    enigma2-plugin-skins-satdreamgr-hd-transpba - 1.0+git62+1eb0a08-r0 - 1.0+git64+fbc2c86-r0
    kernel-module-michael-mic - 3.2-r14.17.49 - 3.2-r14.19.49
    kernel-module-rt2x00lib - 3.2-r14.17.49 - 3.2-r14.19.49
    enigma2-plugin-extensions-pictureplayer - 2.7+git12270+ad53578-r67 - 2.7+git12322+98e735a-r67
    kernel-module-rt73usb - 3.2-r14.17.49 - 3.2-r14.19.49
    enigma2-plugin-systemplugins-networkbrowser - experimental-git3889+ca99743-r10 - experimental-git3893+802a267-r10
    kernel-module-snd-mixer-oss - 3.2-r14.17.49 - 3.2-r14.19.49
    kernel-module-snd-page-alloc - 3.2-r14.17.49 - 3.2-r14.19.49
    enigma2-plugin-systemplugins-fastscan - 2.7+git12270+ad53578-r67 - 2.7+git12322+98e735a-r67
    kernel-image - 3.2-r14.17.49 - 3.2-r14.19.49
    satdreamgr-extra-feed-configs - 1.0-r3 - 1.0-r4
    enigma2-plugin-systemplugins-hotplug - 2.7+git12270+ad53578-r67 - 2.7+git12322+98e735a-r67
    kernel-module-r8712u - 3.2-r14.17.49 - 3.2-r14.19.49
    kernel-module-eeprom-93cx6 - 3.2-r14.17.49 - 3.2-r14.19.49
    kernel-module-ath9k-common - 3.2-r14.17.49 - 3.2-r14.19.49
    enigma2-plugin-systemplugins-cablescan - 2.7+git12270+ad53578-r67 - 2.7+git12322+98e735a-r67
    kernel-module-cifs - 3.2-r14.17.49 - 3.2-r14.19.49
    enigma2-plugin-systemplugins-wirelesslan - 2.7+git12270+ad53578-r67 - 2.7+git12322+98e735a-r67
    gst-plugin-subsink - 0.10.0+git5+0cb20d6-r1 - 0.10.0+git5+0cb20d6-r2
    libdvdread4 - 5.0+git244+3dbbdfb-r0 - 5.0+git246+41c3e42-r0
    kernel-module-ecb - 3.2-r14.17.49 - 3.2-r14.19.49
    kernel-module-ath9k-htc - 3.2-r14.17.49 - 3.2-r14.19.49
    enigma2-plugin-systemplugins-frontprocessorupgrade - 2.7+git12270+ad53578-r67 - 2.7+git12322+98e735a-r67
    enigma2-plugin-extensions-openwebif - 1+git1091+6cf164b-r0 - 1+git1124+263742a-r0
    kernel-module-rt2500usb - 3.2-r14.17.49 - 3.2-r14.19.49
    enigma2-plugin-systemplugins-osd3dsetup - 2.7+git12270+ad53578-r67 - 2.7+git12322+98e735a-r67
    kernel-module-carl9170 - 3.2-r14.17.49 - 3.2-r14.19.49
    enigma2-plugin-extensions-cutlisteditor - 2.7+git12270+ad53578-r67 - 2.7+git12322+98e735a-r67
    enigma2-plugin-systemplugins-positionersetup - 2.7+git12270+ad53578-r67 - 2.7+git12322+98e735a-r67
    enigma2-fonts - 2010.11.14-r67 - 2014.12.17-r0
    enigma2-plugins - experimental-git3889+ca99743-r10 - experimental-git3893+802a267-r10
    enigma2-plugin-extensions-cdinfo - experimental-git3889+ca99743-r10 - experimental-git3893+802a267-r10
    kernel-module-snd-timer - 3.2-r14.17.49 - 3.2-r14.19.49
    libdvdnav4 - 5.0+git782+feb09c3-r0 - 5.0+git783+eaf2c44-r0
    enigma2-plugin-systemplugins-videomode - 2.7+git12270+ad53578-r67 - 2.7+git12322+98e735a-r67
    enigma2-plugin-systemplugins-commoninterfaceassignment - 2.7+git12270+ad53578-r67 - 2.7+git12322+98e735a-r67
    kernel-module-snd-pcm - 3.2-r14.17.49 - 3.2-r14.19.49
    enigma2-plugin-extensions-autobackup - 2.0+git53+16541ca-r0 - 2.0+git62+8333c64-r0
    enigma2-plugin-systemplugins-softwaremanager - 2.7+git12270+ad53578-r67 - 2.7+git12322+98e735a-r67
    enigma2-plugin-extensions-dvdplayer - 2.7+git12270+ad53578-r67 - 2.7+git12322+98e735a-r67
    kernel-base - 3.2-r14.17.49 - 3.2-r14.19.49
    enigma2 - 2.7+git12270+ad53578-r67 - 2.7+git12322+98e735a-r67
    kernel-module-ipv6 - 3.2-r14.17.49 - 3.2-r14.19.49
    kernel-module-ath9k-hw - 3.2-r14.17.49 - 3.2-r14.19.49
    kernel-module-snd-pcm-oss - 3.2-r14.17.49 - 3.2-r14.19.49
    kernel-module-crc-ccitt - 3.2-r14.17.49 - 3.2-r14.19.49
    kernel-module-zd1211rw - 3.2-r14.17.49 - 3.2-r14.19.49
    enigma2-plugin-extensions-mediaplayer - 2.7+git12270+ad53578-r67 - 2.7+git12322+98e735a-r67
    kernel-module-hmac - 3.2-r14.17.49 - 3.2-r14.19.49
    kernel-module-md4 - 3.2-r14.17.49 - 3.2-r14.19.49
    enigma2-plugin-systemplugins-skinselector - 2.7+git12270+ad53578-r67 - 2.7+git12322+98e735a-r67
    kernel-module-rt2800usb - 3.2-r14.17.49 - 3.2-r14.19.49
    enigma2-plugin-extensions-graphmultiepg - 2.7+git12270+ad53578-r67 - 2.7+git12322+98e735a-r67
    enigma2-plugin-systemplugins-satfinder - 2.7+git12270+ad53578-r67 - 2.7+git12322+98e735a-r67
    enigma2-plugin-systemplugins-videotune - 2.7+git12270+ad53578-r67 - 2.7+git12322+98e735a-r67
    enigma2-plugin-extensions-audiosync - experimental-git3889+ca99743-r10 - experimental-git3893+802a267-r10
    BTW, is it not possible to attach a file on this forum?

  7. #7

    athoik's Avatar
    Join Date
    Sep 2012
    Location
    Earth
    Posts
    10,759
    Rep Power
    5927763

    Απ: Move from OpenPLI to SatDreamGr

    There is a newer kernel with nandsim support for ubi enabled machines. We had no problem on dm800se and dm7020hd.

    If you are unsure you can always backup image (from Panel+ -> SDGBackup Dreambox Enigma2) before any update, and if your image get's broken then restore a backup.

    As people said over OpenPLi forum, we are using the same sources, so it is possible to break things.
    Member SatDreamGr Projects

    Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
    Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916

  8. #8

    devilcosta's Avatar
    Join Date
    Dec 2010
    Location
    Εδώ
    Posts
    9,710
    Rep Power
    2556267

    Απ: Re: Απ: Move from OpenPLI to SatDreamGr

    Quote Originally Posted by Marc-UK View Post

    BTW, is it not possible to attach a file on this forum?
    Hi, i fix it, you can do it now.
    Member SatDreamGr Projects.
    ....................................
    Orbital Position = 5W - 3E - 9E - 13E - 19E.
    ....................................
    Satellite Receivers = Edision OS Mio 4K -- Edision OS Nino+ -- Edision OS Mini -- Edision OS Mega -- Medi@link IXUSS ZERO -- Dm 7020HD -- Vu+ Solo 2 -- Octagon SF4008 Triple 4K.
    ....................................
    Module = CI+ Fransat.
    ....................................
    Tuner Card = TBS5925.
    ....................................
    Images = SatDreamGr.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. SatdreamGR skin for Openpli
    By cobus in forum English Section General
    Replies: 4
    Last Post: 25-03-19, 17:45
  2. Δοκιμές USB DVB-T Stick με Satdreamgr-openpli 4.0
    By athoik in forum Περί SatDreamGr Images
    Replies: 161
    Last Post: 29-07-18, 10:45
  3. satdreamgr-openpli-4-vusolo2 by st7 TEAM
    By tytus 56 in forum Vu+ Solo 2
    Replies: 2
    Last Post: 19-04-15, 10:29
  4. Usals σε ET9000(satdreamgr-openpli 4)
    By liquidxd in forum Περί SatDreamGr Images
    Replies: 1
    Last Post: 23-11-14, 23:42

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •