Ok you can retry (cross your fingers!) after updating.
If there is an error again provide logs again like above.
Ok you can retry (cross your fingers!) after updating.
If there is an error again provide logs again like above.
Member SatDreamGr Projects
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
PluginBrowser PluginBrowser
[EPGC] event bcc5 not found in epgcache
lookup events with 'Dokter Tinus' as title (case sensitive)
lookup events with 'Over mijn lijk' as title (case sensitive)
action -> OkCancelActions ok
okbuttonClick
[eDVBLocalTimerHandler] diff is 0
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] not changed
[EPGC] abort non avail schedule other reading
[EPGC] abort non avail netmed schedule reading
[EPGC] abort non avail netmed schedule other reading
[EPGC] abort non avail FreeSat schedule_other reading
[EPGC] abort non avail viasat reading
action -> WizardActions ok
kernel-module-nandsim - 3.8.7-r6.12
[SKIN] Parsing embedded skin <embedded-in-'OMBManagerList'>
action -> ColorActions green
[SKIN] Parsing embedded skin <embedded-in-'OMBManagerInstall'>
[EPGC] nownext finished(1417983145)
action -> SetupActions ok
Archive: /media/usb/open-multiboot-upload/openatv-4.2-et9x00-20141206_usb.zip
inflating: et9x00/imageversion
inflating: et9x00/kernel.bin
inflating: et9x00/noforce
inflating: et9x00/rootfs.bin
main thread is non-idle! display spinner!
inflating: et9x00/splash.bin
[EPGC] schedule finished(1417983227)
[EPGC] stop caching events(1417983227)
[EPGC] next update in 60 min
40704+0 records in
40704+0 records out
83361792 bytes (79.5MB) copied, 49.823929 seconds, 1.6MB/s
UBI device number 1, total 4096 LEBs (520093696 bytes, 496.0 MiB), available 0 LEBs (0 bytes), LEB size 126976 bytes (124.0 KiB)
ERROR reading PES (fd=55) - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 55(8)
action -> OkCancelActions cancel
action -> WizardActions back
action -> OkCancelActions cancel
[ePopen] command: ('hdparm', 'hdparm', '-y', '/dev/sda')
poll: unhandled POLLERR/HUP/NVAL for fd 65(16)
it looks much better now i only need to test but my wive is looking tv i have just to wait the usb i have now a image on the usb
Groetjes Cobus R
VU+UNO 4K DVB-C FBC SatdreamGR / Openpli
Xtrend ET10000 OpenPli /SatdreamGR DVB C & 1x DVB T(2)
FTA Ziggo
With OpenATV it works great now Thanks.
Groetjes Cobus R
VU+UNO 4K DVB-C FBC SatdreamGR / Openpli
Xtrend ET10000 OpenPli /SatdreamGR DVB C & 1x DVB T(2)
FTA Ziggo
Thanks for the Great images you made for all boxes
Groetjes Cobus R
VU+UNO 4K DVB-C FBC SatdreamGR / Openpli
Xtrend ET10000 OpenPli /SatdreamGR DVB C & 1x DVB T(2)
FTA Ziggo
I use now 4 images
Open ATV
Xtrendalliance 4.2
Open XTA 4.0
and in flash SDG
All work perfect now with Openmultiboot plugin
use all images there own kernels ? with older multiboot Plugins from/with dreambox the use the kernel of the image from the flash.
Groetjes Cobus R
VU+UNO 4K DVB-C FBC SatdreamGR / Openpli
Xtrend ET10000 OpenPli /SatdreamGR DVB C & 1x DVB T(2)
FTA Ziggo
OpenMultiboot uses the kernel of the image you are booting into.
Member SatDreamGr Projects
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
Withe Openspa it dont work verry strange.
Groetjes Cobus R
VU+UNO 4K DVB-C FBC SatdreamGR / Openpli
Xtrend ET10000 OpenPli /SatdreamGR DVB C & 1x DVB T(2)
FTA Ziggo
it is not booting? or it is not installing?
ολα ειναι FLU
Member SatDreamGr Projects
i just installed it and it boots normally.
ολα ειναι FLU
Member SatDreamGr Projects
There are currently 1 users browsing this thread. (0 members and 1 guests)