How to setup Crossepg {XEPGDB providers} on a USB stick

[korn]

How to setup Crossepg {XEPGDB providers} on a USB stick

As follows:-

1} Press Menu on your STB Remote Control and choose SETUP {1}



2} Then select CrossEPG {2}



3} Press Configure and in this menu you will setup the location to store the EPG data.
The best place is on a USB stick, because it is fast. You should see a menu similar to this {3}



4} Now Press the RED button to save and you will go back to the CrossEPG main menu.
Next you must Update XEPGDB Providers, the info page will look like this {4}



5} Now your provider list has been updated, so now select XEPGDB providers {5}



6} In the XEPGDB providers menu, just select the provider(s) that you want to download,
the info page will look like this {6}



7} Now press the Yellow button to download the 3 providers that were selected.
*On the first generation boxes (Solo, Duo, Uno and Ultimo), it is a good idea to only select 2 or 3 providers as the epg data fills up the memory very quickly*. On the Solo2 you can select all packages without any issues. {7}



8} Now your EPG is ready to used {8}



9} To update your EPG data, you can either navigatie into the main CrossEPG menu, and select Download now, or you can Press the Green button @STB Remote Control and use the CrossEPG Downloader. {9}



9.1} After Pressing CrossEPG Downloader the data will be download, converted and then loaded ready for use automatically. {9.1}




*** The above guide can also be used for the Rytec EPG packages, just select Rytec instead of XEPGDB and follow the above guide ***

Thank you EVO, Artorius, bogdanm and vuplus-community.net

[peri]

Χρήσιμος οδηγός για αρχαρίους. Πολλά ευχαριστώ στον korn.
Το μόνο πρόβλημα που βλέπω σε αυτό το Plugin είναι η απουσία ρύθμισης για εβδομαδιαία ανανέωση. Δυστυχώς όσο περισσότερους παρόχους επιλέγεις, τόσο περισσότερη ώρα κάνει να κατεβάσει το epg.