Items required:
USB Stick Formated to FAT32 – Use HP Format Tool for formatting if you have any problems with the USB not being seen by the Clarke Tech ET-9000 after formatting using Windows.
Your chosen USB image file
Clarke Tech ET-9000 Receiver – This guide is good for the Clarke Tech ET-9000
1) Download and open your chosen .zip/.rar image file
2) Extract the ET9000 folder to the root of you USB stick
3) Power off your receiver using the mains switch at the rear
4) Insert your USB stick into one fo the USB connections on the ET-9000
5) Power on receiver using the mains switch at the rear
6) Press the OK Button on the front panel of the receiver which you’ll fin behind the front flap It will now read on the front of the receiver ‘Update in progress’ and the receiver will automatically reboot after the update is complete

Και εδω το et-9000 control center

Download
Code:
http://rapidshare.com/files/443716417/ET9000CC.zip
Και εδω ενα usb backup utility
USB BACKUP Utility for ENIGMA2
Version 1.0 - 03-12.2010
supports USB Backups

Code:
#
#############################################################
# USB BACKUP Utility for ENIGMA2
# Version 1.0 - 03-12.2010
# supports USB Backups

#############################################################
#
#!/bin/sh

VERSION="Version 1.0 - 03.12.2010"
DIRECTORY=$1

if grep et9000 /etc/hostname > /dev/null ; then
  MODEL=et9000
  OPTIONS="--eraseblock=0x20000 -n -l"
else
  echo "No right MODEL Box detected !!!"
  exit 0
fi

echo "________________________________________________________"
echo " "
echo "USB Backup Tool for $MODEL " $VERSION
echo "________________________________________________________"
echo " "
echo "Please be patience, a backup will now be made,"
echo "this will take approximately 2 minutes "
echo "________________________________________________________"

DATE=`date +%Y%m%d_%H%M%S`
IMAGEVERSION=`date +%Y%m%d`
MKFS=/usr/bin/mkfs.jffs2
BUILDIMAGE=/usr/bin/buildimage
NANDDUMP=/usr/bin/nanddump
EXTRA=$DIRECTORY/fullbackup_$MODEL/$DATE

if [ ! -f $MKFS ] ; then
	echo $MKFS" not found"
	exit 0
fi

if [ ! -f $BUILDIMAGE ] ; then
	echo $BUILDIMAGE" not found"
	exit 0
fi

if [ ! -f $NANDDUMP ] ; then
	echo $NANDDUMP" not found"
	exit 0
fi

rm -rf $DIRECTORY/bi
mkdir -p $DIRECTORY/bi
mkdir -p /tmp/bi/boot
mkdir -p /tmp/bi/root


if [ $MODEL = "et9000" ] ; then
mount -t jffs2 /dev/mtdblock2 /tmp/bi/boot
mount -t jffs2 /dev/mtdblock3 /tmp/bi/root
 
fi

if [ -s $BUILDIMAGE ] ; then
	echo "Create boot.jffs2"
	$MKFS --root=/tmp/bi/boot --faketime --output=$DIRECTORY/bi/boot.jffs2 $OPTIONS
	echo "Create root.jffs2"
	$MKFS --root=/tmp/bi/root --faketime --output=$DIRECTORY/bi/root.jffs2 $OPTIONS
fi

echo "Create kerneldump"

if [ $MODEL = "et9000" ] ; then
	nanddump /dev/mtd1 -o -b > $DIRECTORY/bi/vmlinux.gz
fi

echo "________________________________________________________"
echo " "
echo "Creating $MODEL USB-Backup Image"
echo "________________________________________________________"

  mkdir -p $DIRECTORY/$MODEL
  mkdir -p $EXTRA
  mv $DIRECTORY/bi/root.jffs2 $DIRECTORY/$MODEL/rootfs.bin
  mv $DIRECTORY/bi/boot.jffs2 $DIRECTORY/$MODEL/boot.bin
  mv $DIRECTORY/bi/vmlinux.gz $DIRECTORY/$MODEL/kernel.bin
  echo "rename this file to 'force' to force an update without confirmation" > $DIRECTORY/$MODEL/noforce;
  echo $MODEL-$IMAGEVERSION > $DIRECTORY/$MODEL/imageversion;
  cp -r $DIRECTORY/$MODEL $EXTRA/$MODEL #copy the made back-up to images

if [ -f $DIRECTORY/$MODEL/rootfs.bin -a -f $DIRECTORY/$MODEL/boot.bin -a -f $DIRECTORY/$MODEL/kernel.bin -a -f $DIRECTORY/$MODEL/imageversion -a -f $DIRECTORY/$MODEL/noforce ] ; then
  echo "________________________________________________________"
	echo " "
	echo "USB Image created on:" $DIRECTORY"/$MODEL "
	echo "and there is made an extra copy on:" 
	echo $EXTRA"/$MODEL"
	echo "________________________________________________________"	

	echo " "
	echo "        To restore the image: "
	echo "Place the USB-stick in the front USB-port and switch the "
	echo "$MODEL off and on with the powerswitch on the back of "
	echo "the $MODEL. Follow the instructions on front-display." 
	echo " "
else
	echo "Image creation failed - "
	echo "e.g. wrong backup destination or"
	echo "no space left on backup device"
fi

 umount /tmp/bi/root
 umount /tmp/bi/boot
 rm -rf /tmp/bi
 rm -rf $DIRECTORY/bi

exit
Download
Code:
http://rapidshare.com/files/443716654/build-usb-image.sh.zip