Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: OpenSPA updates and changelogs

  1. #1
    korn's Avatar
    Join Date
    Dec 2010
    Location
    SatDreamGr
    Posts
    57,697
    Rep Power
    2484793

    OpenSPA updates and changelogs

    OpenSPA 7.5.004

    What is new
    - New drivers :
    Qviart Dual:
    Add transcoding support
    Add new hiplayer source for KODI
    fix fullhd skin boot loop issue
    Edision (modelos 4K):
    Overall volume level increase
    Extending demodulator reset time
    Add Linux 5.15 Kernel. The new NTFS "NTFS3" file-system driver is present for this code originally developed by Paragon Software. KSMBD was merged as an in-kernel SMB file server that aims to be high performance, support advanced features around RDMA and other areas that can be more easily achieved in kernel-space, and being lighter weight than Samba
    Dinobot 4k Twin, Hitube 4k pro, Hitube 4k plus e Izibox Elite 4k :
    fix dvb-t 7 Mhz
    Zgemma H9se :
    Update drivers
    Izibox Eco Twin HD y James Donkey Duo
    rc stream cannot be decrypted.
    - New OpenSPA support for:
    AB PULSe 4K mini
    - Add wireguard support to more boxes (client mode ok and server mode only with access to box to their clients). See list at the bottom.
    - Update Zerotier to 1.8.4
    - Update rclone to 1.57.0
    - Update Dreamplex.
    - OpenStarHD, add infobar with Christmas style.
    - Add notification when enigma start.
    - In Network setup, only show physical eth & wlan connections, not VPN.
    - Mount extra partition in Multiboot SD for Octagon SF8008, uClan Ustym 4k pro and Gigablue Trio 4k
    - Fix h9sdmanager for Zgemma i55plus
    - New Bootlogo, thanks to @pepeman

    To report bugs : //openspa.info/forums/reportes-de-fallos-en-openspa.265/

    User : root
    Pass : openspa

    Lista de receptores con nuevo soporte wireguard (Nota : no es soporte completo de modo servidor)
    Boxes list with new wireguard support (Note : not full server mode support)

    Dinobot 4K
    Dinobot 4K Twin
    Dinobot 4K+
    U5 mini
    ARIVA ATV Combo
    ARIVA ATV TT
    HITUBE4K
    HITUBE4K PLUS
    HITUBE4K PRO
    IZIBOX ECO TWIN HD
    IZIBOX ELITE 4K
    IZIBOX ONE 4K
    IZIBOX X3
    James Donkey HD duo
    Vu+ Duo 4k
    Vu+ Ultimo 4k
    Zgemma H9 Combo
    Zgemma H9 Twin
    Zgemma H9.2H
    Zgemma H9.2H SE
    Zgemma H9.2S
    Zgemma H9S
    Zgemma H9S SE
    Zgemma H9T
    Zgemma i55 Plus
    PULSe 4K
    PULSe 4k Mini
    Maxytec Multi 4K
    Mut@ant HD60

    openspa



  2. #2
    korn's Avatar
    Join Date
    Dec 2010
    Location
    SatDreamGr
    Posts
    57,697
    Rep Power
    2484793

    Απ: OpenSPA updates and changelogs

    OpenSPA 7.5.005



    What is new
    - New drivers :
    Qviart Dual:
    TS FILE: the first 5 secons Audio not in Sync and Video Plays slower
    5 RECORDINGS SIMULTANEOUSLY: If I want to make more than 4 recordings at the same time, only 0 bytes of files are generated from the 5 recording onwards
    THE PROGRESS BAR ON THE DISPLAY WHEN YOU REBOOT THE BOX: During the process of booting, on the diplay now it shows the progres bar but sometimes you can see as the Current Time pops up and disappear during that process
    fix deepstandby time display.
    fix front time display.
    fix display signal snr ( signal finder) percent and db value.
    added zapmode interface. ( mute, hold )
    fix hdmi cec operation.
    remove support for blindscan-dvbs
    ab-com Pulse 4k and Pulse 4k mini
    -fix HDR-SDR auto switch
    fix brightness in standby
    Izibox Elite 4k, Hitub 4k PRO and Dinobot 4k Twin
    support for multiboot.
    - New support for Zgemma H8.2H and Zgemma H11S
    - Update xtraEvent plugin, thanks digiteng.
    - Add wifi rt3070, rtl8192eu and rtl8821cu by default.

    To report bugs : http://openspa.info/forums/reportes-...n-openspa.265/

    User : root
    Pass : openspa


    Descarga_Openspa



  3. #3
    korn's Avatar
    Join Date
    Dec 2010
    Location
    SatDreamGr
    Posts
    57,697
    Rep Power
    2484793

    Απ: OpenSPA updates and changelogs

    OpenSPA 8.1.001

    What is new

    - New drivers :

    • Octagon SFX60x8 :
      - fixed streaming or stream relay issue
      - fix satip issue
    • Gigablue Trio 4K :
      - Add support new rcu6

    - New enigma2 totally renewed.
    - Adapted skins OpenStarHD, BlackSPA and MetrixJR to new enigma2. Other skins 1080p may not be 100% compatible.
    - Translations to spanish and catalan totally renovated.
    - Updated Kodi to 19.5 Matrix
    - Updated Zerotier to 1.10.6.
    - Updated Tailscale to 1.40.0.
    - Updated samba to support 3.x version kernels
    - Updated rclone to 1.62.2.
    - Add native multiboot for Vu+ 4K boxes.
    - Add FCC for Vu+ boxes.
    - Remove external feed block.
    - Remove plugins swapmanager, spzZapHistory y scriptexecuter, now integrated in enigma2.
    - Fixed WeatherSpz MSN server and debugged code.
    -Added more screens and widgets skin OpenstarHD.

    User : root
    Pass : openspa

    IMPORTANT: UPDATE THIS RELEASE ONLY BY CLEAN INSTALL, NO BACKUPS. AVAILABLE BY FLASHONLINE AND PENDRIVE. REPEAT, DON'T INSTALL ANY BACKUP!!!


    OpenSPA Downloads



  4. #4
    korn's Avatar
    Join Date
    Dec 2010
    Location
    SatDreamGr
    Posts
    57,697
    Rep Power
    2484793

    Απ: OpenSPA updates and changelogs

    OpenSPA 8.3.003

    What is new

    - New drivers :
    Vu+ Ultimo 4k, Duo 4k :
    enable ci iocntrl for fbc9-16
    - Update rclone to 1.65.0.
    - Update tailscale to 1.56.1.
    - Update sinric pro to 2.6.4.
    - Update gstreamer to 1.22.7.
    - Add USB-TDT tuners Mygica T230C v2, T230C Lite, T230C v2 Lite & T230A to mediabuild for automatic install.
    - Update IpToSat mod norhap to 2.1.
    - Extra Panel : fix Jungle picons and channels lists download, add LG channels for IPTV lists.
    - Update skins BlackSPA, OpenStarHD and MetrixJR.
    - Add StreamRelay module.
    - Fix time zone, automatic winter/summer time change and fix time download weather data for Spzweather MSN server.
    - New version xtraevents 5.3, elcinema server removed, Google download removed, now only possible with apikey (has a limit of 100 downloads per day), TMDB image download fixed, TMDB personal apikey fixed, Google manual download fixed, now with apikey limit daily 100 downloads, added option to use bapikey Google personal, (recommended), fixed IMDb manual download, added user information in manual downloads for all providers. Added automatic backdrop in permanentvents (if installed) in manual search for backdrops from xtraevents.
    - Fix Footonsat time zone and automated winter/summer time.
    - Fix LCD skin.


    User : root
    Pass : openspa

    OpenSPA Downloads





  5. #5
    korn's Avatar
    Join Date
    Dec 2010
    Location
    SatDreamGr
    Posts
    57,697
    Rep Power
    2484793

    Απ: OpenSPA updates and changelogs

    OpenSPA 8.3.006


    What is new

    - Update rclone to 1.66.0.
    - Update tailscale to 1.66.4.
    - Update zerotier to 1.14.0.
    - Update gstreamer to 1.22.12.
    - Update transmission to 4.0.5.
    - Add new plugin IPTVchannels.
    - Fix wireguard for Ferguson Ariva.
    - Update plugin IPtoSAT, thanks to norhap.
    - Fix inadyn, thanks to norhap.
    - Update infobar BlackModern for skin BlackSPA, thanks to elduque.
    - Added network configuration screen in Skin OpenStarHD.
    - Fixed FootOnsat errors and added new competitions, including EURO CUP.

    User : root
    Pass : openspa

    OpenSPA Downloads





  6. #6
    korn's Avatar
    Join Date
    Dec 2010
    Location
    SatDreamGr
    Posts
    57,697
    Rep Power
    2484793

    Απ: OpenSPA updates and changelogs

    OpenSPAv8.4.001

    - New drivers:

    • Gigablue Quad 4k, UE 4k and X3 4k.
      • update rescue loader to version #200

    - Update release from 8.3 to 8.4 with these changes :

    • OE-A 5.4 (OE 5.0 scarthgap)
    • openssl 3.3.0
    • Python 3.12.4
    • gstreamer 1.22.12
    • glibc 2.39
    • ffmpeg 6.1.1
    • gcc 13.2.0


    - Kodi 21.0 "Omega"
    - Update tailscale to 1.72.1
    - Update rclone to 1.67.0
    - Update transmission to 4.06
    - Allow show picon for bouquets in channel list
    - Vu+: add protection of host kernel from kexec guest. Thanks WanWizerd for suggestion
    - Renamed plugin Xstreamity to Xklass
    - Fix Infobar BlackSPA with zzPicon, where the CPU, RAM and hdd were not shown.

    User : root
    Pass : openspa

    OpenSPA Downloads



  7. #7
    korn's Avatar
    Join Date
    Dec 2010
    Location
    SatDreamGr
    Posts
    57,697
    Rep Power
    2484793

    Απ: OpenSPA updates and changelogs

    OpenSPAv8.4.004

    What is new



    - New drivers :

    Gigablue UHD Quad 4K PRO.

    test driver for Quadpip

    - Update tailscale to 1.80.0

    - Update rclone to 1.69.0

    - BlackSPA : add new screens.

    - Improve compatibility skin openSPA_JRLG.

    - Update plugin Chromium2 (working Netflix)

    - Fix Foreca for Meteo plugin (spzWeather)

    - Fix Aemet bug that caused crash when changing day for Meteo plugin (spzWeather)

    - Fix text codification bug for OpenSPA Downloads.

    - Fix OSCam Info.

    - Add active CAMD info in extensions menu, into menu Decode and parental control.

    - Fix and add configurable options for 12 digits display for Lunix3 4K.

    - Fix texts for display 220 menu summary.

    - Fix bug with network adapters.

    - Subtitles: Add configurable colors (add green, cyan and magenta).

    - Tuners: Add LNB unicable Inverto IDLU-32L412-UNBRR-OPN.

    - Add missed screens for AutoBouquetsMaker in OpenStarHD.

    - Changes in display resolution and picons codification for IPTV channels (plugin IPTVChannels).

    - Fix issue with repeated bars ("/") at the end of default path /usr/share/enigma2/picon// in Picons folder, into Setting OSD menu. If anybody have this issue, change path with left or right buttons and set again your path.



    To report bugs :


    User : root

    Pass : openspa



    OpenSPA Downloads



  8. #8
    korn's Avatar
    Join Date
    Dec 2010
    Location
    SatDreamGr
    Posts
    57,697
    Rep Power
    2484793

    Απ: OpenSPA updates and changelogs

    OPENSPA 8.5.002

    What is new

    - New drivers:

    Gigablue Trio 4k Pro.

    update bt init script again, try to fix timing issue

    Qviart Lunix 4k, Qviart Lunix3 4k.

    Add kexec multiboot support.

    Octagon SF4008, Dinobot U5mini, Dinobot 4k+, Hitube 4K

    Add chkrootmb multiboot support.

    Mut@nt HD51.

    add support PVR descramble in standby, optimise ci.

    Update tailscale to 1.84.0

    Update rclone to 1.70.1


    EPG (Electronic Program Guide)

    Automatic Event Search: Fixed crash when events have identical start and end times (minimum duration: 24 hours). Added option to delete the entire event list (long press RED button); short press deletes only the selected event.

    Timer Button Fix: Corrected issue where the GREEN button didn’t update to “Change Timer” when navigating the OpenSPA guide with an assigned timer.

    Timer Management Dialog: Now includes options to edit, enable/disable, delete, or go to the timer list. Also added to EPG Search (previously only allowed deletion).

    Cosmetic Fixes: Minor visual corrections in the “EPG Search” list.

    New Button Actions in EPG Views (Vertical, Graphical, Multi, InfoBarGraph, Simple):

    RED: IMDb Search (OpenSPA plugin, installable)

    YELLOW: Launch OpenSPA EPG Search

    BLUE: Launch OpenSPA Automatic Event Search See manual: New Button Functions

    > Note: To access the EPG menu and switch between views, long-press the EPG button.

    Channel List

    Fixed crash when rebooting after using the standard channel list via: Menu → Channel Selection Options → Standard Channel Selection.

    Added context menu to switch back to OpenSPA list if using the standard one. This option appears only if the standard list was selected from OpenSPA.

    OpenSPA Recordings (Movie List)

    Added missing color button actions.

    If we access to “Internet Info” but plugin is not available, it now offers to install it.

    Fixed: “Disable OpenSPA Movie List” menu option.

    Fixed issue when playing and stopping/deleting a recording simultaneously (RED button).

    Instant Recording Menu (REC Button)

    Fixed behavior when no event exists: Previously showed “Add recording (stop after current program)”; Now shows “No event info found – record (24 hours)” if no EPG cache.

    Enigma – Recording Messages


    ServiceHisilicon active: Cannot record IPTV channels.

    ServiceApp active: Cannot record IPTV if ExtEplayer3 or GstPlayer is active.

    IPToSAT-synced satellite channel: Recording not possible; IPToSAT uses ServiceApp players.

    Client device using reserve tuner: Enigma will prompt to enter standby mode to allow recording.> Note: To record IPTV streams, use the Enigma ServiceMP3 player.

    Enigma Standard Menu (Vertical)

    Fully functional now, with same actions as OpenSPA horizontal menu (except horizontal-specific ones).

    BLUE button: Access “OpenSPA Horizontal Menu” from vertical menu.

    OpenSPA Options – Password Change

    Added detailed instructions and updated screen to hide data slider.

    GREEN button behavior fixed: If pressed after setting password, message actions now work correctly (stay or exit).

    Added descriptions for parameters requiring Enigma2 restart.

    Customize Home Menu (Horizontal)

    The “Customize” menu is immutable (can’t be hidden).

    Always accessible to allow Home Menu personalization.

    System Info

    Now displays the type of player in use.

    spaQButton (Key Remapping)

    TimeShift with Enigma (without OpenSPA plugin):


    Fixed dual action bug (play/pause icons flashing).

    TimeShift now starts independently depending on system used.

    Fixed crash when deleting a list item with YELLOW button and pressing it again with no item.

    TimeShift

    OpenSPA TimeShift: Enabled by default if plugin is installed.

    Enigma TimeShift Settings:> Note: Enabling both “Auto-record” and “Start timeshift after X seconds” will record every channel change. Not recommended unless intentional.

    Tuner Scan & Reception – Reserve Tuner Settings

    To import channels/EPG from server tuner, use this URL format: [ICODE]http://rootpenspa@serverip:8001 [/ICODE]Replace “openspa” with server password.

    For remote use (e.g., second home), replace IP with VPN or hostname.

    To decode from server (client installs nothing), enable: “Decode HTTP streams” in server’s Customize menu.

    Client tuners must be unconfigured.

    Security Tips:

    Enable “Require authentication for HTTP streams”

    Change default password if not on local network or using VPN.

    If server has tuner display, it will show tuner usage.

    Recommended: Enable client notifications to confirm successful channel import.

    Enigma C++ Library

    Deprecated sigc++-2.0 removed. OpenSPA now uses sigc++-3.0 with C++20.

    Kodi

    Kodi can now launch directly via remapped button (previously opened settings).

    Added missing menu: Menu → Receiver Settings → Kodi Configuration.

    Foreca Weather

    Added missing translation.

    ZeroTier

    Prevent crashes when server response is missing.

    IPToSAT

    Can now copy/install binaries and camd control files. Useful for OSCam-based satellite/IPTV sync.

    satellites.xml updates now auto-load.

    Backup/Restore

    Added missing color button actions (thanks ujua).

    Skins

    Fixed text clipping in Enigma Standard Menu for metrixJR and openSPA_JRLG HD-FHD.

    Fixed text clipping in “Settings” for estuaryHD.

    Minor fixes in OpenStarHD.

    System Settings Backup (Software Management)

    Now includes camd binaries and control files if present. Backup runs after restore.


    User : root

    Pass : openspa




  9. #9
    korn's Avatar
    Join Date
    Dec 2010
    Location
    SatDreamGr
    Posts
    57,697
    Rep Power
    2484793

    Απ: OpenSPA updates and changelogs

    OpenSPA 8.5.003


    What is new

    - New drivers:
    Gigablue Quad 4k Pro.
    update createswap to fix quad4kpro slot 7
    Fix CI issue
    Zgemma.
    h9 and i55plus remove legacy sdcard image support,please use the new chkroot multiboot.
    h7 update drives update ci support
    Uclan Ustym 4K PRO, Qviart Dual and Octagon SF8008.
    rename blindscan download files, to fix issue with source folder
    VU+.
    enable ubimb for solo2 solose and zero.
    [media] si2168: Si2168-D60 support Support for new demod versión

    - Gigablue Quad Plus is now considered smallflash.
    - Added FTP support for smallflash receivers.
    - Added Emby client plugin to feeds.
    - Fixed minidlna and updated to version 1.3.3.
    - Added gstplayer2.
    - Updated Tailscale to 1.88.3.
    - Updated rclone to 1.71.1.
    - Updated Zerotier to 1.16.0.
    - Updated Transmission to 4.1.0.
    - Updated GStreamer to 1.24.13.
    - Updated SABnzbd to 4.5.2.
    - Fixed video playback in MyTube.
    - Fixed FootonSat.

    MultiBoot:​
    Fixes and improvements for receivers that support Chkroot.
    Added support to expand more slots on external media (USB, SD-card, etc.).
    Chkroot: Creates 1 slot every 500 MB and a Swap partition.
    DVB: Satellite Tuning:​
    Added support to lock satellites when using Automatic DiSEqC (Simple - Automatic Mode).
    Configuration:
    Configuration Mode → Simple
    Satellite → Automatic
    Set the automatic DiSEqC scan order → All (default).
    You can set a different order in other configurations.
    Press OK or YELLOW for Auto DiSEqC.
    VOD IPTV:​
    Fixed issue when resuming playback from saved points.
    Fixed interruption when pressing OK during playback.
    Channel List: Context Menu:​
    Fixed error when creating a Bouquet, reported by @ HarmFuL.
    Added display of icons / bullets for all items in the list.
    InfoBar:​
    Added a new parameter in Playback Settings and set by default:
    Allow exiting the player with EXIT → “No (with notification)”
    Displays a notification explaining how to exit if EXIT is pressed without stopping playback.
    If you already know how to exit and don’t want to see this message, set it to “No” (previous default).
    Extensions List (BLUE button):​
    Added display of icons / bullets for all items in the list.
    Wizard:​
    Added two extra steps for receivers with reduced Flash or low memory:
    Reduced Flash: Option to choose whether or not to start FlashExpander.
    Low memory: Option to choose whether or not to initialize Swap.
    For reduced Flash receivers:
    Improved detection of this type of receiver so that, if a backup is available, it can be restored.
    Hotplug:​
    Fixed a possible BSOD.
    Swap:​
    Fixed issue creating Swap on internal flash or external devices
    (external device must be formatted in a Linux filesystem: EXT4 / EXT3).
    IPToSAT:​
    Fixed incompatibilities when tuner reservation is enabled, the receiver has FBC tuners, and IPToSAT is active.
    Skin:​
    Fixed loop issue when the selected skin’s XML file is incorrect and a skin change is attempted.
    Added conditional option to show or hide the INFO key in channel list types (Providers, Satellites, Favorites, etc.) — skin must support it.
    Fixed issue in OpenStarHD skin showing color buttons in EPG-Import, reported by @HarmFuL.
    Software Management: System Settings Backup:​
    Added Tailscale and ZeroTier to files included in backup.



    User : root
    Pass : openspa

    OpenSPA Downloads




  10. #10
    korn's Avatar
    Join Date
    Dec 2010
    Location
    SatDreamGr
    Posts
    57,697
    Rep Power
    2484793

    Απ: OpenSPA updates and changelogs

    OpenSPA 8.6.002 - 08/03/2026


    What is new



    - New drivers:

    Gigablue Quad UHD 4K pro : fix cutlist editor
    - New plugin AITools.

    - Update tailscale to 1.94.2 (remember you can update from plugin as well)

    - Update gstreamer to 1.26.10

    - Update minisatip to 2.0.72

    - Update PanelExtra, picons pelajustrana always updated.

    - Update plugin IPTVChannels, now you can add multiple epg files.

    - Update spanotifications to reduce excessive CPU usage.

    - Update skins.

    - NewBootlogo, thanks to pepeman



    SoftCSA (Software Decoding via Common Coding Algorithm):



    Add upport for connecting an Enigma2 client with protocol version 3.



    The SoftCSA configuration is located in Menu -> Receiver Settings -> Decryption & Parental Control -> SoftCSA Settings.



    A new encoding algorithm, called protocol version 3 (CSA-ALT), has been added. When the hardware decoder is unable to decrypt, the native software decoding integrated into Enigma2 is used. This is a more functional alternative to the StreamRelay module.



    Protocol 3 has been implemented in both OSCam and NCam via DVBAPI for software decoding in Enigma2. The OSCam or NCam DVBAPI connects to the CAT PMT server in mode 6, and then the Enigma2 client (ePMTClient) connects using protocol version 3.



    Required configuration:

    Disable StreamRelay for the channels where you will be working in this mode and use either OSCam or NCam.
    Add the following to the [dvbapi] section of oscam.conf or ncam.conf, or do so via Webif: Config -> DVB-Api -> PMT Mode:

    pmt_mode = 6
    extended_cw_api = 1


    Note: If you do not want to use this protocol and prefer a different PMT mode, do not choose mode 2 or 5, as you will lose channel display.



    If you enable SoftCSA via OSCam or NCam with pmt_mode = 6 and extended CW API, and you have restored a backup using a binary without this module active (which is called extended CW), you will not be able to view channels. You must install the new OSCam or NCam packages from OpenSPA downloads, where this function is enabled.



    To verify that it is working in this mode, check the OSCam or NCam log where the following appears: (dvbapi) Client connected:'Enigma2'(protocol version = 3)



    CAMDManager:

    - Adapt to SoftCSA.

    - Add camd checking when Enigma2 restarts.



    Enigma2 HTTP Authentication:

    - Remove authentication request in local HTTP streaming.



    Network:

    - Add the "Transmission" plugin to the Network Services menu (it can be installed, uninstalled, or disabled from this menu).



    - Add a new way to restart the network via socket. The conventional method of restarting the network is also maintained, if used via the BLUE Extensions button.



    - Add the ability to install DNS authenticators, which establish the authenticity, integrity, and reliability of DNS responses. To install it, go to Network Services -> DNSCrypt. Once installed, it becomes configurable from the Network -> DNS Settings menu.



    User : root

    Pass : openspa



    Tailscale:

    - Modify to allow you to see connected devices when API tokens are generated on your Tailscale site (entered in /etc/keys/tailscale_api.key)





    Download:

    OpenSPA Downloads




Page 1 of 2 12 LastLast

Similar Threads

  1. Egami Updates and Changelogs
    By korn in forum Περί VU Enigma 2
    Replies: 0
    Last Post: 06-03-26, 09:16
  2. OpenViX Updates and Changelogs
    By korn in forum Περί VU Enigma 2
    Replies: 86
    Last Post: 26-12-25, 13:08
  3. openDroid Updates and Changelogs
    By korn in forum Περί VU Enigma 2
    Replies: 0
    Last Post: 17-08-23, 15:04
  4. VTI Image Updates and Changelogs
    By korn in forum Περί VU Enigma 2
    Replies: 479
    Last Post: 11-04-22, 08:28
  5. OpenSpa Updates and Changelogs
    By korn in forum Περί VU Enigma 2
    Replies: 0
    Last Post: 16-06-16, 14:18

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •