30 West / 11422 V

[EnoSat]

Hi,
on Hispasat now HD channel but without defined PID`s in PMT.
11422 V , DVB-S2/8PSK , SR-3333 , FEC-3/4

Now edit lamedb and lamedb5 but not picture , sound OK (debug show set demux to MPEG2 but need MPEG4)

0ce40000:0032:0036
	s 11422000:3333000:1:3:-300:2:0:1:2:0:2
/

0000:0ce40000:0032:0036:25:0
KURIAKOS
p:11422V,c:000300,c:010301,c:030300,f:4

<   708.216> playing 1:0:19:0:32:36:CE40000:0:0:0:
[  708.285000] stop pcr0 on dmx 0 pid:1e00
[  708.286000] stop video0 on dmx 0 pid:1e00
[  708.307000] VIDEO0: stop decode
[  708.308000] VIDEO0: set blank to 1
[  708.309000] audio: decoder stop
[  708.310000] stop audio on dmx 0 pid:1e01
[  708.311000] audio: xpt stop(2)
[  708.311000] no decoder left in sync handling so disable xpt_sync
[  708.312000] bcm_audio_channel_stop(2) done
cleaning up
TuxTxt cache cleared
<   708.323> getResolvedKey config.usage.remote_fallback failed !! (Typo??)
<   708.425> not pauseable.
<   708.429> not pauseable.
<   708.433> not pauseable.
<   708.437> new service started! trying to download cuts!
<   708.437> download failed, no cuesheet interface
<   708.439> RemovePopup, id = ZapError
[  708.675000] pilot_off!
TuxTxt cache cleared
[  708.865000] start pcr0 on dmx 0 pid:300 index 1
[  708.866000] start audio on dmx 0 pid:301
[  708.867000] audio xpt start
[  708.867000] sync is off so we enable it
[  708.868000] demux-index 0 pcr0pid 300
[  708.868000] using 1 as pcr0 pidchannel
[  708.869000] MPEG
[  708.869000] audio: decoder start 0
[  708.871000] audio delay 18000 (200 ms)
[  708.872000] total video delay: 18000 (200 ms)
[  708.873000] VIDEO0: set streamtype!
[  708.873000] set MPEG2
[  708.874000] sw rave disabled!
[  708.874000] video delay 0 (0 ms)
[  708.874000] total video delay: 0 (0 ms)
[  708.875000] start video0 on dmx 0 pid:300
[  708.876000] total video delay: 0 (0 ms)
[  708.879000] VIDEO0: start decode
<   708.879> [eDVBPESReader] Created. Opening demux
<   708.880> [eDVBPESReader] Created. Opening demux
<   708.884> not pauseable.
<   708.888> not pauseable.
[  708.980000] RAP first pts 0x5d9abf94, stc 0x5d9aa206, pcr valid
[  708.983000] audio_cdb_itb_error_isr: 35 callbacks suppressed
[  708.983000] audio_cdb_itb_error_isr! underflow
[  708.987000] audio_cdb_itb_error_isr! underflow
[  708.991000] audio_cdb_itb_error_isr! underflow
[  708.995000] audio_cdb_itb_error_isr! underflow
[  708.999000] audio_cdb_itb_error_isr! underflow
[  709.003000] ch0: lock
[  709.003000] RAP sampling rate info isr (48000)
[  709.004000] eModeChange Isr.. set source_changed_event!

any idea for fix ?

[athoik]

Hi,

You can use c:05000X in lamedb to define the videotype.


c:05000X is the cache for video type (cVTYPE in lib/dvb/idvb.h) and X is one of the following (enum from videostream struct lib/dvb/pmtparse.h)

vtMPEG2       = 0
vtMPEG4_H264  = 1
vtMPEG1       = 2
vtMPEG4_Part2 = 3
vtVC1         = 4
vtVC1_SM      = 5
vtH265_HEVC   = 6
vtCAVS        = 7

So for h264 you need c:050001 in lamedb.

[EnoSat]

yes,
again thanks