TBS 5925 Experimental 2.0 for DM8000

[EnoSat]

after reboot now detect too TBS , very thanks for help

[athoik]

Nice

Please now check that multistream works!

Here you can find satellites.xml : http://www.satdreamgr.com/forum/show...OR-MULTISTREAM

Enjoy your TBS cards on Dreambox as you wish for... Just don't forget what team did it....

[EnoSat]

Nice

Please now check that multistream works!

Here you can find satellites.xml : http://www.satdreamgr.com/forum/show...OR-MULTISTREAM

Enjoy your TBS cards on Dreambox as you wish for... Just don't forget what team did it....

now check scan 5 West , all work best
only maybe some cosmetic update for info about DVB-S transponder (yellow vs blue button)

yellow button

blue button

blue and yellow button

image hosting 30 mb

[mcelliot_g]

No need for cosmetic change, what you actually see with the yellow button is the data used for tuning and with the blue button the real time tuning values. TBS tunes differently than other tuners (especially ACM/VCM frequencies change parameters on the go) so these offset values are normal in this case and really useful!

[EnoSat]

No need for cosmetic change, what you actually see with the yellow button is the data used for tuning and with the blue button the real time tuning values. TBS tunes differently than other tuners (especially ACM/VCM frequencies change parameters on the go) so these offset values are normal in this case and really useful!

hmm, real ID stream on DVB-S = 255 or PLS = 3 ? http://s20.postimg.org/ablojh5qz/1_0...0000_0_0_0.jpg
yes , main parameters (freq,SR...) right for yellow (lamedb) and blue (tuner)

[athoik]

There is a patch missing that reads more accurate information from tuner and enables blindscan. Needs more work in order to apply on old kernel 3.2 so it was left out.

[mcelliot_g]

hmm, real ID stream on DVB-S = 255 or PLS = 3 ? http://s20.postimg.org/ablojh5qz/1_0...0000_0_0_0.jpg
yes , main parameters (freq,SR...) right for yellow (lamedb) and blue (tuner)

Oh, yes for these sure, but it's a patch issue, not a cosmetic issue. This screen reads the info from somewhere else, this is what needs a tuneup!
Another issue is on manual tune and satfinder, when you try to tune manually the parameters on already tuned MIS channels revert to root and 0000, so satfinder will not work on manual mode out of the gate, you need to re-input the correct values again.

[athoik]

now check scan 5 West , all work best

You have also TBS5980, right? Can you check if channels on 5W work with 5980 please?

[athoik]

Another issue is on manual tune and satfinder, when you try to tune manually the parameters on already tuned MIS channels revert to root and 0000, so satfinder will not work on manual mode out of the gate, you need to re-input the correct values again.

The fix should simple and requires no change in C++. Only in python and only this file:

diff --git a/lib/python/Screens/ScanSetup.py b/lib/python/Screens/ScanSetup.py
index adc9794..89e0048 100644
--- a/lib/python/Screens/ScanSetup.py
+++ b/lib/python/Screens/ScanSetup.py
@@ -838,6 +847,7 @@ class ScanSetup(ConfigListScreen, Screen, CableTransponderSearchSupport, Terrest
                                        defaultSat["fec_s2"] = frontendData.get("fec_inner", eDVBFrontendParametersSatellite.FEC_Auto)
                                        defaultSat["rolloff"] = frontendData.get("rolloff", eDVBFrontendParametersSatellite.RollOff_alpha_0_35)
                                        defaultSat["pilot"] = frontendData.get("pilot", eDVBFrontendParametersSatellite.Pilot_Unknown)
+                                       defaultSat["is_id"] = frontendData.get("is_id", 0)

Something like following after is_id.

+                                       defaultSat["pls_mode"] = frontendData.get("pls_mode", 0)
+                                       defaultSat["pls_code"] = frontendData.get("pls_code", 0)

if that works please upload the modified file in order to commit into our multistream branch.

[EnoSat]

You have also TBS5980, right? Can you check if channels on 5W work with 5980 please?

only:
TBS5925 (SAT)
TBS5880 (TER+CABLE)
TBS5220 (TER+CABLE)