New Drivers 2011-09-18
-hdmi cec: signal address change with POLLPRI
-scaler sharpness: fixed 'neutral' value (middle of the scale)
-added video source viewport/clipping settings (/proc/stb/vmpeg/[0-1]/clip_*)
copy and replace the 4 extracted Files here: /lib/modules/2.6.31-3.2/extra
reboot.
your Clarke-Tech Support Team
Downloads/Clarke-Tech & Xtrend/Drivers
New Drivers Clarke-Tech
26/09/2011
Changelog-Treiber:
- MKV trickplay fix
- No channel lock fix (When no signal is available on the channel then the box reacts slow)
- Increase speed channel switching
- STC sync for video/audio/firstenable (DTS Downmix solution, need seperate dts code which will be released soon)
- SCI improvements (Final fix for orf-ice and some other adjustments)
- VFD: TS icoon by TimeShift (by activate timeshift the TS icoon on the VFD display light up)
- Scaler-Sharpness (0 - neutral) in the middle (13)
Download/clarke-tech/drivers
New Drivers Clarke-Tech
30/09/2011
Download/clarke-tech/drivers
New Drivers 2011-09-30 in ipk format
Change log:
-lnb disable (with DvbOptiond Plugin)
-fancontrol proc entries for et9x00
-Pcm Delay adjustable A/V SettingsDownload/clarke-tech/drivers
First LINUX3 Driver
Drivers need new LINUX3 image which will be provide soon.
Linux3: The new standard for settopboxes
- Improved dvb-usb like Vtuner, webcam
- Improved wifi usb devices
- Improved file system: UBIFS and EXT4
- Improved streaming
- Improved picture quality and sound
- Improved overall preformance by about 10%
The linux kernel 2.6.18 was getting to old and it's allready more then 5 year old.
By the introduction of linux3 this year it was time to leave the old linux version and go to the standard what is used today.
The driver makers made it and they proudly present the first settopbox running on linux3.
ET9000, 9200 drivers 3.1.0 linux 2011-11-05
Drivers Update - ET9X00 -2011-12-12
Folgende Anpassungen sind enthalten:
-DTS downmix support
-fix AC3+/DDP passthrough support
-fix separate 50hz/60hz videomodes, autoselect based on media format
-fix keeping correct 3dmode after videmode switch
-fix keeping correct PiP position after videomode switch
-scaler sharpness: split into pep_scaler_sharpness, pep_hscaler_sharpness, pep_deinterlacer_sharpness
-fix aspect ratio detection for certain media formats.
-fix aspect ratio for PiP, PiG
-fastforward/rewind (TS)
-add pep_digital_contour_removal
-fix initial audio playback after startup
Drivers Update - ET9X00 06-01-2012
Changelog:
-improve stream playback
-redraw framebuffer after videomode change
-fix fast winding in mpeg2 ts
-add rc type 11 (combined 5 and 9)
-vtuner improvements
-add /proc/stb/hdmi/preemphasis setting
-add /proc/stb/lcd/show_outputresolution (show output resolution instead of media resolution on vfd)
There are currently 1 users browsing this thread. (0 members and 1 guests)