Page 21 of 38 FirstFirst ... 171819202122232425 ... LastLast
Results 201 to 210 of 373

Thread: DM800SE Clone Images Ο.Ε. 2.0 SIM 2 ssl84d

  1. #201

    Re: DM800SE Clone Images Ο.Ε. 2.0 SIM 2 ssl84d

    Sim2-dreambox-image-dm800se-20151205-#84d-FE-CU-Jasper-20151213


    changes:

    FE
    added a modified FlashExpander which is deleting directories in /usr to get more free Flash memory

    CU
    added the Clone Update Plugin to upgrade your image online (thx SOA-President)

    Sim2

    SSL84d

    Enigma2: 2015-12-02-tarball
    ################################################## #######################################

    Webinterface is working.
    Teletext is working.
    WLAN is working

    ################################################## #######################################

    Extend your Flash memory to an USB memory stick:

    1. add an empty USB memory stick to your box (be aware the content will be deleted)
    2. prepare your USB memory stick for FlashExpander

    Menu
    Setup
    System
    Storage device
    choose your USB memory stick which you want to use for FlashExpander (be aware the content will be deleted)
    Red Button: Initialize
    after the USB memory stick is formatted do not mount it

    3. Reboot your box

    4. Extend your Flash memory using FlashExpander

    Blue Button
    Start Flashexpander
    choose your USB memory device and start the copy process (this takes a few minutes)
    a message will appear to restart the box

    5. check if FlashExpander is working

    Blue Button
    Start Flashexpander

    6. now you should have plenty of free Flash memory (17 MB free)
    New installed Plugins will be installed on extended Flash on USB

    ################################################## #########################################
    Update your image online:


    Blue Button
    Start SOA Clone Updater 3.0
    "Upgrade-your-Image" and press OK

    The image will be updated and restart automatically (after reboot your image is be updated)

    ################################################## #########################################


    Download:

    2015-12-13




    https://mega.nz/#!IkonHKwC!F-1HkQo-W...DPw6byuemLS7M8



    Jasper

  2. #202

    Re: DM800SE Clone Images Ο.Ε. 2.0 SIM 2 ssl84d

    Sim2-D.M.S-Img-dm800se-v4.5-#84d-Jasper-20151219


    Clean, no changes.

    Sim2

    SSL84d

    Enigma2: 2015-12-02-tarball
    ################################################## #######################################

    Webinterface is working.
    Teletext is working.

    ################################################## #######################################


    Download:

    2015-12-19




    https://mega.nz/#!wpoXRSKZ!JV4UeHeh9...S6lZPiteueuc8Y



    Jasper

  3. #203

    korn's Avatar
    Join Date
    Dec 2010
    Location
    SatDreamGr
    Posts
    51,779
    Rep Power
    2484980

    Απ: DM800SE Clone Images Ο.Ε. 2.0 SIM 2 ssl84d


    OpenPLi-5.0-beta-dm800se with gstreamer 1.6.2 #ssl84d by gjstroom

    May your New Year be filled with Joy, Health and Success!
    I present OpenPLi 5.0 the first fully working test image.
    It's not official released yet by the OpenPLi team, so please don't spread to the other boards.
    For now it's only accessable by Dreamoem core members.
    What's new in PLi 5.0 ?

    - Uses the latest Openembedded build framework for embedded Linux
    - GCC 5.3
    - Bitbake 1.28
    - GStreamer 1.6.2
    - Pyhton 2.7.9
    - Samba - 4.1.12



    This image is a 100% build image from OpenPLi source, it uses 20150618 drivers.
    Build on a HP DL360 dual Xeon E5440 (8 cores) 32G running Ubuntu 14.04.
    You can use 100% safe the update function, this image uses it's own custom feeds.
    Also included a display blanking patch when zapping (no longer a freezed image during zap).
    Check the Openpli Oe Core history for updates. You can find all Enigma2 changes here.

    Features:
    source: 20151226
    drivers: 20151201 with patched 20131001 bcm7405
    bootloader: ssl84d
    size: 54.0 mb



    Bootlogo:
    standard bootlogo

    Plugins:
    No additional plugins installed, use the plugins menu and download with the green button.

    Skins:
    PLi-HD



    Image flashing:
    Be sure you have SSL88 on your box, if you get the "INVALID IMAGE (OR OLD VERSION)" error, flash SSL88 first and try again.
    If your box is already at SSL88x you can flash the image immediately, the new SSL84d is included in the image !
    Internet Explorer (recommended)
    SUNRAY-FlashUP
    Powercycle after flashing



    OpenPLi-5.0-beta-dm800se #ssl84d:

    <-Download->

    I try to keep this thread clean and will delete posts if it's not contributing to the content

  4. #204

    korn's Avatar
    Join Date
    Dec 2010
    Location
    SatDreamGr
    Posts
    51,779
    Rep Power
    2484980

    Απ: DM800SE Clone Images Ο.Ε. 2.0 SIM 2 ssl84d



    TSimage-3.0-OE-2.0-dm800se-2015-12-29-ramiMAHER#ssl84D


    sim2


    enigma2 patched :2015/12/02 : by ramiMAHER




    Code:
    29 Dec 2015 (TSimage)
    
    update enigma2-tspanel to 2.6-r9 (add support for full HD skin)
    update enigma2-skin-ts-MetrixHD to 2.1-r13 (add new nim slot descriptions (A1/A2/B1/B2) to infobar)
    update enigma2-skin-ts-mx-hq2 to 1.0-r1 (add theme HQ8)
    update enigma2-skin-ts-mx-hq to 1.0-r1 (add theme


    Download


    TSimage-3.0-OE-2.0-dm800se-2015-12-29-ramiMAHER#ssl84D

  5. #205

    korn's Avatar
    Join Date
    Dec 2010
    Location
    SatDreamGr
    Posts
    51,779
    Rep Power
    2484980

    Απ: DM800SE Clone Images Ο.Ε. 2.0 SIM 2 ssl84d



    newnigma2-stable-lean-dm800se-v4.0.16 -ramiMAHER#ssl84D

    sim2


    enigma2:patched : 12.03.2015: by ramiMAHER





    Basics:

    Enigma2 4.0: 30.12.2015
    Enigma2 Plugins: 02.01.2016
    Newnigma2 Plugins: 02.01.2016


    DM 800 HD se

    driver: 02.12.2015
    secondstage: 84
    kernel 3.2.68


    DM 800 HD se v2

    driver: 02.12.2015
    secondstage: 89
    kernel 3.2.68



    changelog E2 30.12.2015:

    dvbnamespace is now always 0xFFFF0000 for DVB-C and 0xEEEE0000 for DVB-T (compatible with OE2.2)
    fixed possible crashes / endless loops on title change in mediaplayer (introduced in 20151202 tarball)
    fixed possible crashes on try to play unaccessible mediafiles
    fixed possible deadlock caused by media subtitles
    fixed audio/subtitle selection on movie playback with players opened via mainmenu
    better compatibility with external plugins which patches the ChannelSelection
    fixed crash on non driver based cable transponder search



    changelog E2 02.12.2015:

    fixed H264 video detection of some TV services (sometimes AC3 descriptors are sent on the videopid?!?.... ignore this for now)
    CommonInterfaceAssignment: dont crash when no accessible CI is available
    allow to override broken transponders (same TSID/ONID combinations) via /etc/enigma2/scan_tp_valid_check.py again
    DVDPlayer
    - reset the in_menu state on service stop (fixes buttons not working on next service start .. probably after choosing another iso file or dvd folder via filebrowser)
    - small fixes (from go4dream)
    unicable.xml: add Spaun SUS5581/33NF models (thx to Uenz)
    PicturePlayer: allow to disable the pictureplayer border to allow unscaled pictures up to skin resolution
    useful for displaying test images to optimize sharpness, contrast, brightness settings)
    set http timeout for servicemp3 streaming to 30 seconds
    delay playService requests until the ChannelSelection is fully initialized
    fixed hbbtv video download
    added si2166b blindscan support
    added use SCPC search range option for si2166b tuner
    show correct nim slot descriptions in infobar and serviceinfo dialog (A1/A2/B1/B2) skin must support this!!
    optimized speed of servicescan without NIT a bit
    small dvdplayer fixes (from go4dream)




    Notice: Update from v4.0.x to 4.0.16 only possible by updating via console.

    Changes:

    Added: Newnigma2 FileBrowser
    Added: Skin Evolution-HD by Kerni (thx)
    Added: newnigma2.Kerni.PanTV-HD by Kerni (thx)
    Added: Kerni.Gnome-HD by Kerni (thx)
    Added: VideoDB V2.2 by Dr.Best (click here for more information) (thx)
    Added: swapmanager
    Added: wget
    Added: stat
    Added: weathercomponent (needed for some skins)
    Added: eventposition (needed for some skins)
    Added: reftopiconname (needed for some skins)
    Added: ledmanager (be carefully changed source="ButtonGreentext" to source="key_green") screen for skinner
    Added: Black-Box.HD.ME (32bit skin)
    Added: cryptsetup more information
    Added: newnigma2-servicerestart: restart services via gui, like init.d, if telnet is not reachable screen for skinner
    Added: free space check's before installing or upgrade packages
    Added: min free flash space is 3mb for installing/upgrading some packages
    Added: improve network connectivity check in newnigma2 installer
    Added: new skin option: progress_pointer (since E2 14.02.2014 possible) screen for skinner
    Added: readded extendedinfobar
    Bugfix: Rebuild Picon handling/loading/caching (less memory consumption)
    Bugfix: Newnigma2 Services fix getPNG cache failure (memoryleak)
    Bugfix: Improved onlineinstaller cache handling (sometimes strange screen output)
    Bugfix: neutrino keymap
    Bugfix: newnigma2.Kerni.PanTV-HD icons
    Bugfix: Caid Renderer didn't close ecm.info and share.info properly
    Bugfix: for loading wrong or no newnigma2 service menu png's
    Bugfix: loosing picon value in servicelist after using configsaver
    Bugfix: for not shown all skins in nenwigma2 installer skin section, like tikila skins
    Bugfix: prevent of loading skin_infobar_wetter.xml on other skins then "newnigma2-" skins
    Bugfix: broken gui installer
    Update: Some improvements on our onlineinstaller
    Update: znc to version 1.4
    Update: openvpn to version 2.3.4
    Update: german translation
    Update: picon renderer. create piconSList dir for servicelist picons.
    Update: IPTV-List-Updater
    Update: cryptsetup
    Update: openssl
    Removed: we have removed non working plugins. most of them are integrated in mediaportal.
    Removed: keymanger plugin from image. It's still available from our feed.
    here u can find USB to UART driver
    here u can find DreamUP V1.3.3.11



    Info: since release of e2 v. 3.2 there is no dm7025 support yet. that's what dmm said.
    Multiboot: No support for multiboot. Not planned. No need for such a tool.
    GP3wizard: No support for gp3wizard. Probably not running. Not needed in Newnigma2 environment.

    Important changes:

    1. Install picons on USB-Drives:
    press menu button -> setup -> system -> storage devices -> then press red button for initialize (be carefully all your data will be erased). last step is to mount the device.
    next step: press blue button -> newnigma2 services -> sytsem tools -> expert settings -> change opkg ignore USB/HDD from yes to no. Restart enigma2 und install picons on your usb device.

    2. network configuration:
    If the IP address assigned manually, as well as the address of the DNS server must be entered.
    press menu button -> setup -> system -> network -> adapter settings

    3. install or upgrading:
    before installing/upgrading packages, we now check if at least are 3mb free space in flash.
    ipk's/packages from the newnigma2 team has a value which says the installer the minimum needed space for
    the package. if the min required space is not available than the installation aborts.
    !! Attention enigma2 ipk needs at least 9mb !!

    4. issue due upgrade to v4.0.16:
    if you have troubles by upgrading to v4.0.16 even no 9mb free space for the enigma2 package, so
    you can first upgrade the newnigma2 installer package. After reboot try to upgrade again via gui, the installer
    ignore's now the 9mb needed from the package and uses instead the value you set in
    "blue button -> newnigma2 services -> system tools -> expert settings -> min. free space".

    Wichtige Änderungen:

    1. Picons auf USB-Laufwerken/der internen Festplatte installieren:
    USB-Laufwerk über "Menü > Einstellungen > System > Speichergeräte" initialisieren und anschließend mounten"
    "blaue Taste > Newnigma Services > System Werkzeuge > Experten Einstellungen > Opkg ignoriere USB/HDD = nein > E2 Neustart und anschließend auf USB installieren"

    2. Netzwerk Konfiguration:
    "Menü > Einstellungen > System > Netzwerk > LAN oder WLAN > Adapter Einstellungen"
    Wird die IP-Adresse manuell konfiguriert so muss zwingend auch die Adresse des DNS-Servers eingetragen werden.

    3. Installation oder Update des System:
    Es müssen nun mindestens 3 MB freier Flashspeicher zur Verfügung stehen um Installationen/Updates vorzunehmen.
    Vor Installation eines ipk's vom newnigma2 team, wird geprüft, ob für dieses Paket noch genügend freier Speicher vorhanden ist.
    Sollte das nicht der Fall sein, bricht die Installation ab.
    !!Achtung das enigma2 Paket benötigt min 9MB!!

    4. Bei Problemen mit dem Update auf v4.0.16:
    Sollte das Update auf v4.0.16 nicht funktionieren, weil dem enigma2 Paket keine 9MB zur Verfügung stehen, so ist zuerst der newnigma2 installer zu aktualisieren.
    Nach anschließendem reboot kann man den Upgradevorgang via gui fortsetzen. Dabei wird der Check des freien Speichers beim Upgrade auf den Wert gesetzt, der unter
    "blaue Taste -> Newnigma Services -> System Werkzeuge -> Experten Einstellungen -> min. free space" eingestellt ist.

    Your
    Newnigma2 Team



    Download


    newnigma2-stable-lean-dm800se-v4.0.16 -ramiMAHER#ssl84D

  6. #206

    Απ: DM800SE Clone Images Ο.Ε. 2.0 SIM 2 ssl84d

    newnigma2_stable_lean_eB-sim2-dm800se_v4.0.16




    DM 800 HD se: Newnigma2 v4.0.16
    #####################################################################
    Newnigma2 team proudly presents:
    Newnigma2 v4.0.16
    #####################################################################

    HINWEIS: In der Versionierung hat sich ein Fehler eingeschlichen. Es wird sowohl bei einem frisch geflashten v4.0.16, als auch nach erfolgreichem Update noch v4.0.15. angezeigt. Davon bitte nicht irritieren lassen. Wenn das Update fehlerfrei durchgelaufen ist, seid ihr auf v.4.0.16.

    Basics:

    Enigma2 4.0: 31.12.2015
    Enigma2 Plugins: 02.01.2016
    Newnigma2 Plugins: 02.01.2016


    DM 800 HD se

    driver: 02.12.2015
    secondstage: 84
    kernel 3.2.68


    changelog E2 30.12.2015:

    dvbnamespace is now always 0xFFFF0000 for DVB-C and 0xEEEE0000 for DVB-T (compatible with OE2.2)
    fixed possible crashes / endless loops on title change in mediaplayer (introduced in 20151202 tarball)
    fixed possible crashes on try to play unaccessible mediafiles
    fixed possible deadlock caused by media subtitles
    fixed audio/subtitle selection on movie playback with players opened via mainmenu
    better compatibility with external plugins which patches the ChannelSelection
    fixed crash on non driver based cable transponder search



    Notice: Update from v4.0.x to 4.0.16 only possible by updating via console.

    Changes:

    Added: Newnigma2 FileBrowser
    Added: Skin Evolution-HD by Kerni (thx)
    Added: newnigma2.Kerni.PanTV-HD by Kerni (thx)
    Added: Kerni.Gnome-HD by Kerni (thx)
    Added: VideoDB V2.2 by Dr.Best (click here for more information) (thx)
    Added: swapmanager
    Added: wget
    Added: stat
    Added: weathercomponent (needed for some skins)
    Added: eventposition (needed for some skins)
    Added: reftopiconname (needed for some skins)
    Added: ledmanager (be carefully changed source="ButtonGreentext" to source="key_green") screen for skinner
    Added: Black-Box.HD.ME (32bit skin)
    Added: cryptsetup more information
    Added: newnigma2-servicerestart: restart services via gui, like init.d, if telnet is not reachable screen for skinner
    Added: free space check's before installing or upgrade packages
    Added: min free flash space is 3mb for installing/upgrading some packages
    Added: improve network connectivity check in newnigma2 installer
    Added: new skin option: progress_pointer (since E2 14.02.2014 possible) screen for skinner
    Added: readded extendedinfobar

    Bugfix: Rebuild Picon handling/loading/caching (less memory consumption)
    Bugfix: Newnigma2 Services fix getPNG cache failure (memoryleak)
    Bugfix: Improved onlineinstaller cache handling (sometimes strange screen output)
    Bugfix: neutrino keymap
    Bugfix: newnigma2.Kerni.PanTV-HD icons
    Bugfix: Caid Renderer didn't close ecm.info and share.info properly
    Bugfix: for loading wrong or no newnigma2 service menu png's
    Bugfix: loosing picon value in servicelist after using configsaver
    Bugfix: for not shown all skins in nenwigma2 installer skin section, like tikila skins
    Bugfix: prevent of loading skin_infobar_wetter.xml on other skins then "newnigma2-" skins
    Bugfix: broken gui installer

    Update: Some improvements on our onlineinstaller
    Update: znc to version 1.4
    Update: openvpn to version 2.3.4
    Update: german translation
    Update: picon renderer. create piconSList dir for servicelist picons.
    Update: IPTV-List-Updater
    Update: cryptsetup
    Update: openssl

    Removed: we have removed non working plugins. most of them are integrated in mediaportal.
    Removed: keymanger plugin from image. It's still available from our feed.

    here u can find USB to UART driver
    here u can find DreamUP V1.3.3.11



    Info: since release of e2 v. 3.2 there is no dm7025 support yet. that's what dmm said.
    Multiboot: No support for multiboot. Not planned. No need for such a tool.
    GP3wizard: No support for gp3wizard. Probably not running. Not needed in Newnigma2 environment.

    Important changes:

    1. Install picons on USB-Drives:
    press menu button -> setup -> system -> storage devices -> then press red button for initialize (be carefully all your data will be erased). last step is to mount the device.
    next step: press blue button -> newnigma2 services -> sytsem tools -> expert settings -> change opkg ignore USB/HDD from yes to no. Restart enigma2 und install picons on your usb device.

    2. network configuration:
    If the IP address assigned manually, as well as the address of the DNS server must be entered.
    press menu button -> setup -> system -> network -> adapter settings

    3. install or upgrading:
    before installing/upgrading packages, we now check if at least are 3mb free space in flash.
    ipk's/packages from the newnigma2 team has a value which says the installer the minimum needed space for
    the package. if the min required space is not available than the installation aborts.
    !! Attention enigma2 ipk needs at least 9mb !!

    4. issue due upgrade to v4.0.16:
    if you have troubles by upgrading to v4.0.16 even no 9mb free space for the enigma2 package, so
    you can first upgrade the newnigma2 installer package. After reboot try to upgrade again via gui, the installer
    ignore's now the 9mb needed from the package and uses instead the value you set in
    "blue button -> newnigma2 services -> system tools -> expert settings -> min. free space".

    Wichtige Änderungen:

    1. Picons auf USB-Laufwerken/der internen Festplatte installieren:
    USB-Laufwerk über "Menü > Einstellungen > System > Speichergeräte" initialisieren und anschließend mounten"
    "blaue Taste > Newnigma Services > System Werkzeuge > Experten Einstellungen > Opkg ignoriere USB/HDD = nein > E2 Neustart und anschließend auf USB installieren"

    2. Netzwerk Konfiguration:
    "Menü > Einstellungen > System > Netzwerk > LAN oder WLAN > Adapter Einstellungen"
    Wird die IP-Adresse manuell konfiguriert so muss zwingend auch die Adresse des DNS-Servers eingetragen werden.

    3. Installation oder Update des System:
    Es müssen nun mindestens 3 MB freier Flashspeicher zur Verfügung stehen um Installationen/Updates vorzunehmen.
    Vor Installation eines ipk's vom newnigma2 team, wird geprüft, ob für dieses Paket noch genügend freier Speicher vorhanden ist.
    Sollte das nicht der Fall sein, bricht die Installation ab.
    !!Achtung das enigma2 Paket benötigt min 9MB!!

    4. Bei Problemen mit dem Update auf v4.0.16:
    Sollte das Update auf v4.0.16 nicht funktionieren, weil dem enigma2 Paket keine 9MB zur Verfügung stehen, so ist zuerst der newnigma2 installer zu aktualisieren.
    Nach anschließendem reboot kann man den Upgradevorgang via gui fortsetzen. Dabei wird der Check des freien Speichers beim Upgrade auf den Wert gesetzt, der unter
    "blaue Taste -> Newnigma Services -> System Werkzeuge -> Experten Einstellungen -> min. free space" eingestellt ist.

    Your
    Newnigma2 Team

    ---------------------------------
    http://workupload.com/file/b0nLs4Gl
    ---------------------------------------------

    elblindo

  7. #207

    korn's Avatar
    Join Date
    Dec 2010
    Location
    SatDreamGr
    Posts
    51,779
    Rep Power
    2484980

    Απ: DM800SE Clone Images Ο.Ε. 2.0 SIM 2 ssl84d

    Sim2-dreambox-image-dm800se-20160105-#84d-Jasper-20160107



    DMM Image Experimental (opendreambox-2.0.0)


    Clean, no changes.

    Sim2

    SSL84d

    Enigma2: 2015-12-30-tarball

    #########################################################################################

    Webinterface is working.
    Teletext is working.
    WLAN is working

    #########################################################################################

    Download:

    2016-01-07

    https://mega.nz/#!gg4wVYpT!E1e675lcK...MwbYTxcG0_xQco



    Jasper

  8. #208

    korn's Avatar
    Join Date
    Dec 2010
    Location
    SatDreamGr
    Posts
    51,779
    Rep Power
    2484980

    Απ: DM800SE Clone Images Ο.Ε. 2.0 SIM 2 ssl84d

    newnigma2_stable_lean_eB-sim2-dm800se_v4.0.17




    Version=0-4.0.17-20160106
    Comment=opendreambox
    Target=9
    creator=newnigma2 Team <[email protected]>
    url=http://www.newnigma2.to
    Catalog=http://feed.newnigma2.to/stable/4.0

    ---------------------
    http://workupload.com/file/ZQNrOAjf
    -------------------------------

    thx elblindo

  9. #209

    Re: DM800SE Clone Images Ο.Ε. 2.0 SIM 2 ssl84d

    OoZooN-Image-expand3-eB-sim2-dm800se-20160112
    # gemini3/g3_wizard #





    #############################
    version=1000201512311136
    comment=opendreambox
    target=9
    creator=OoZooN <[email protected]>
    url=http://www.OoZooN.tv/
    catalog=
    boxtype=dm800se
    #####################

    1. Expand Flash
    2. Gemini3.2/g3wizard activate


    # Flash Images

    # USB Stick (ext3/ext4) mount /media/expand (files on the stick will be deleted)

    # Call the Extensions and Expand3-memory with start ok (box boots several times)

    # Have fun

    --------------------

    # Images flashen

    # USB Stick (ext3/ext4) einhängen nach /media/expand (Dateien auf dem Stick werden gelöscht)

    # Erweiterungen aufrufen und Expand3-Memory mit ok starten (Box bootet mehrmals)

    # Viel Spaß


    Code:
    http://workupload.com/file/jDTpQJHi


    thx @ elblindo

  10. #210

    Re: DM800SE Clone Images Ο.Ε. 2.0 SIM 2 ssl84d

    OoZooN-Image-eB-sim2-dm800se-20160117




    ------------------------------------------
    Date: 2016-01-17 15:21
    Enigma2: 3.999git20151231-r9.1.0
    Distro: opendreambox 2.0.0
    Machine: Dreambox dm800se
    Issuer: OoZooN
    MD5: c7b82a672dbed4689c244785584098b5
    SHA256: 585f58a8b41fc896cf94770cdb645a10c0604c4abbbe0afedb a809db13b0d1c4
    ----------------------------------------------------

    -------------------------------------
    Code:
    http://workupload.com/file/4VCLoJd0

    ------------------------------------------



    elblindo


Page 21 of 38 FirstFirst ... 171819202122232425 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 3 users browsing this thread. (0 members and 3 guests)

Similar Threads

  1. DM800SE Clone Images Ο.Ε. 2.0 Sunray SR4 ssl84d
    By korn in forum Images DM800SE
    Replies: 24
    Last Post: 05-05-21, 07:52
  2. DM800 Clone Images Ο.Ε. 2.0 SIM 2 ssl84d
    By korn in forum Images Dm800
    Replies: 484
    Last Post: 09-10-19, 17:54
  3. DM500HD Clone Images Ο.Ε. 2.0 SIM 2 ssl84d
    By korn in forum Images Dm500 HD
    Replies: 119
    Last Post: 07-06-18, 02:09
  4. DM800se clone images sim 2.10 ssl84d
    By kobos in forum Images DM800SE
    Replies: 6
    Last Post: 25-03-14, 18:27

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •