RTL-SDR with Enigma2 (SDG Radio)

[stpierre]

If you have strong signals all is working perfect,at least for me...

@athoik

I would like to have plugin just for DAB / DAB + (NO FM e.t.c)
it is also necessary to add DAB channel channel memory.

Then we have a very good plugin that is very usable.
I enjoy music momentarily.

Agree with you thanks.

and Thanks to Athoik !

[athoik]

I think first we need to make first tune faster.

I think it's possible from what I checked.

Next improove the logging, maybe create log file.

Next Radio List. Will contain Frequency, Name, Id.

Next display dB, quality in logs or in UI.

[Matrix10]

Agree with you thanks.

and Thanks to Athoik !

try to increase W15
to W30 or W50

dab-rtlsdr-3 -C %s -W50

the first time it takes longer but then you have all channels in the MUX/trasmitter
============
I have remove all from py coding i have now only DAB+

[stpierre]

Thanks Matrix 10,

I have already test with 5 to 30 but same issue...

Some new tests with a shorter cable from my VHF antenna but always same issue, the problem is to "lock" a mux (bloc).
With this antenna I can receive easealy 3 blocs in my country, no quality signal problem on my audio system.

With SDGRRadio, I often have this:

"there might be a signal here

no ensemble data found, fatal
ofmdProcessor is shutting down"

But when the frequency is "locked" all work fine, it's possible to change channel (in the same mux) enough fastly with yellow button.

[Matrix10]

@athoik

I have a request
if you can make an adequate dab-rtlsdr-3 file

on VU + based images dab-rtlsdr-3 does not work

errror
libstdc ++. so.6
version GLIBCXX_3.4.22 not found (required by dab-rtlsdr-3

I think VU + and BH image uses GLIBCXX_3.4.20

[medousa89]

@athoik the last update on os mega have this error

Collected errors:
 * calculate_dependencies_for: Cannot satisfy the following dependencies for enigma2-plugin-extensions-sdgradio:
 *      dab-cmdline-sdgradio *

[athoik]

Hi,

New version on the feeds!


1. dab-cmdline-sdgradio command will now be used from on.

The code can be found here: https://github.com/satdreamgr/dab-cmdline

New version supports changing to specific channel by writing the hex sid of the channel to stdin. Writing a newline on stdin it switches to next program.
New version also will report much more information to output, eg SNR. We need to see the output in order to add SNR support in UI.

2. The SDGRadio updated to make use of the new command

Also sdgradio updated to support creating list of channels, by pressing menu a list of available channels names will be appeared.
The log will contain the last 200 entries and no duplicates.
The frequency was increased to display 2 decimal digits .


The recipes for building SDRadio for other systems are available here: https://github.com/satdreamgr/SDGRadio

Please report if new features work. Also provide output from logs, we need to see how SNR get's written.


PS. @matrix.

Use this https://a.uguu.se/xy7Lnf3ENepA_dab-c...v7ahf-neon.ipk

I do not have BH build environment, since recipes are available many somebody build them against BH?

[athoik]

@athoik the last update on os mega have this error

Collected errors:
 * calculate_dependencies_for: Cannot satisfy the following dependencies for enigma2-plugin-extensions-sdgradio:
 *      dab-cmdline-sdgradio *

Hi,

Most probably hit the update time, try again

[medousa89]

to all edision os???

[athoik]

Build is still going on... it will take several hours until all feeds refreshed.

Try manually or try again (in few minutes)

opkg install http://188.165.252.42/feeds/satdreamgr-openpli-5/mips32el/dab-cmdline-sdgradio_1.2+git131+e024317-r0_mips32el.ipk