QBoxHD-mini backup utility
QBoxHD-mini backup utility available
This is a BACKUP package for the QBoxHD+QBoxHD-mini
The software in this package reads all the content of the USB pendrive where
the root filesystem of the QBoxHD resides AND the content of the NOR flash
and writes them to the backup USB pendrive in the form of an UPDATE package
that is used for updating the QBoxHD.
This means that after executing this backup procedure the USB pendrive with
the backup package will have a new directory called qboxhd_update with the
following content:
qboxhd_update
|-- README.txt
|-- nor
| |-- bs
| |-- logo
| |-- uboot
| |-- uimage
| `-- uinitramfs
|-- rootfs.cpio
`-- update.sh
The files contained inside the above directory can be considered a verbatim copy
of the running QBoxHD and are ready for updating another QBoxHD.
The USB drive where this backup package resides must be formatted as vfat.
Instructions
=============================
1. Copy the compressed file qboxhd_backup_ddmmyy.tbz to a USB pendrive
2. Optional: If you want a faster update procedure, uncompress the file
inside the USB flash drive. This will create a qboxhd_backup directory
3. Turn off the QBoxHD
4. Insert the USB flash drive that contains the backup file/directory
5. Turn on the QBoxHD
6. The backup procedure starts. The LCD will display the backup status.
7. When the backup procedure finishes, the QBoxHD will continue with
the normal start-up
8. Remove the USB pendrive that will contain the just created backup.
Backup contents
=============================
qboxhd_backup
|-- README.txt
|-- recovery_update.sh
|-- reset_st40
`-- update.sh
Download
Code:
http://rapidshare.com/files/441995074/qboxhd_backup_mini.tbz
New QBoxHD-mini bootloader recovery
New QBoxHD-mini bootloader recovery
Download
Code:
http://rapidshare.com/files/441995604/qboxhd_mini_boot_2010_12_17.rar
Arthur BKP_QBOXHd_MINI_v0.0.50
Arthur BKP_QBOXHd_MINI_v0.0.50
Backup per il MINI
basato sulla Release beta 0.0.50 per QBoxHD MINI.
Softcam Panel V 2.1.1
Radar 4.22
Oscam 4073
---------
Setting dual-feed Vhannibal del 02.12-2010
Slot configurati per Tivsat(basso) skyfo93b(alto)
Oscam.server pre-configurato
Skyn LT6 con info per oscam ecm ecc.Ho modificato la secondinfobar di Diamonder che ringrazio....In pratica si a
avranno 2 infobar una sotto e una sopra....Esprimete il vostro parere se vi piace...
Picon full osd-lcd aggiornati...
Plugin installati:
Isetting di Vhannibal(attivabile premendo il taso blu per più di 1 secondo)
Virtual zap (si attiva premendo per più di 1 secondo il tasto exit)
Setup Quickbutton
Pauli Neutrino Keymap modificato da me per qboxhd e mini
Download
Code:
http://www.multiupload.com/VVRQ1Y5M9G