OCTAGON SF4008 4K IS AVAILABLE
SALAM
OCTAGON SF 4008 ARE AVAILABLE WITH 210 EURO
OCTAGON GERMANY
http://www.octagon-germany.eu
[email protected]
OCTAGON SF4008 4K UHD DVB-S2X
- wieder lieferbar
- again in stock
- tekrar stoklarda
OCTAGON GERMANY
http://www.octagon-germany.eu
[email protected]
1 Attachment(s)
Re: OCTAGON SF4008 4K IS AVAILABLE
1 Attachment(s)
Re: OCTAGON SF4008 4K IS AVAILABLE
NEW INPUT STREAM ID " 3 "
ON FREQUENCY 12711 H 35500 SAT 5°W
Multistream
PLS MODE: Root
PLS CODE : 8
Multistream
La 7 w F 970 971 Ita 711
La7d w F 990 991 Ita 712
La 7 HD w F 1530 1532 Ita 751
MPEG-4/HD
La 7d HD w F 1540 1542 Ita 752
MPEG-4/HD
@Ghost 299
300 99
SO WITH THIS NEW ID YOU WILL GET SAME CHANNELS OF ID 1 AND 2
Attachment 4052
Re: OCTAGON SF4008 4K IS AVAILABLE
I am interested in this box but there are a couple of questions I would like to ask.
1) The great SatDreamGr image is based on OpenPLi but there is no original OpenPLi for SF4008 so how is it possible that this image is still based on OpenPLi?
2) I understand PLi skins are available for this box using SatDreamGr?
3) Does BBC at 27.5W work on this box just like it does on other boxes using SatDreamGr?
Re: OCTAGON SF4008 4K IS AVAILABLE
1) even if there isn't an openpli image, we can build image for a receiver,from the openpli repository. the problem (for us) is,that we need double work to resolve any problems...
2) yes, pli skins are available and for this box,but as in any other box,some panels or plugins,may not covered/skined from these skins
3) as i remember there was a software fix for these channels,which is available for all receivers under satdreamgr. so if there isn't any hardware issue (i didn't heard something) yes those channels should work...
Απ: OCTAGON SF4008 4K IS AVAILABLE
Regarding 1. this is our BSP layer for Octagon: https://github.com/satdreamgr/meta-octagon
You can use it to build an OpenPLi based image for your self.
Everyone can use OpenPLi sources to build an "OpenPLi" based image.
Re: OCTAGON SF4008 4K IS AVAILABLE
Thank you both.
By the way, does the box support PowerVu without stream relay?
Re: OCTAGON SF4008 4K IS AVAILABLE
i confirm 27,5°W works with SDG-5
The SF4008 kernel driver does NOT support PowerVU algorithm. But you will be successful with stream relay.
By the way: OpenPli and SDG-5 are pretty similar for me. I gave both receivers (SF4008 and HD51) same lookout and feel. Both receivers are controlled by a dreambox remote control - even their is same handling..
Re: OCTAGON SF4008 4K IS AVAILABLE
Thanks.
Does HD51 with OpenPLi work with 27.5W without doublet's script?
By the way, what is the advantage of SF4008 over HD51 or vice versa?
Re: OCTAGON SF4008 4K IS AVAILABLE
Meanwhile all images i know (SDG, Openpli, OpenATV, OpenEight) run without doublets scripts (see my state in OpenPli forum). I could not figure out big differences between both receivers. Both tuners (SF4008 and HD51) support multistream. So far i did not compare tuner sensibility.
If it is important for you: the HD51 kernel driver supports the DES algorithm for PV decoding without stream relay.
Zapping speed is comparable, booting time is comparable (who wonders - both have the same hardware platform).
Ah, one thing: the Tuner A of SF4008 cannot really deal with the 27,5°W transponders symbol rate: from reception till complete blackout. Tuner A is also known as troublemaker with APSK16 modulation.